mặt dựng aluminium

The facades of numerous high-rises are made from aluminum, the wonder material which is leading range of many architects and designers today. Here is a have a look at how these facades can be maintained and kept as clean as new.

For several years now, aluminum facades have adorned the high-rise structures around the world and so are usually regarded as a maintenance-free material, no surprise many architects and designers are picking this material. Speculate these highrises look good, it can be essential for them to actually 'look good' and thus they need to be cleaned and maintained to retain their sheen in addition to their original appearance.

mat dung alu

With growing environmental concerns affecting most of us, the buildings and highrise structures may also be not spared. With pollutants, dirt and emissions taking their toll on these facades, cleaning and them becomes an absolute necessity. Zeroing in for the aluminum facades, here is a brief input as to how these aluminum facades might be maintained and what can be carried out to retain their original glory.

mặt dựng nhà đẹp
Starting
Cleaning aluminum facades requires much technical and professional care, gauging the extent for cleaning which needs to be done for individual structures. Buildings created from anodized aluminum, painted aluminum facades degrade on account of various pollutants and hence the cleaning procedure involves removal of oxidation, chalking, pollutants and silicone residues through the surface. Although anodized aluminum was considered maintenance-free earlier mainly because it was viewed as hard and weather-proof. But this all changed as environmental hazards started taking toll for the structures and corrosion rates started rising. So, taking all of this into mind, here is how aluminum facades can be cleaned through the following methods:

The essential cleaning of an anodized aluminum fa�ade includes water cleaning methods and chemical cleaning methods. Water cleaning methods include water soaking and pressure washing, though pressure washing isn't suitable for aluminum facades.
Water Soaking
A steady flow water is employed to loosen the dirt making use of the desired nozzles and piping. If the dirt, soil or grime still remains, then hand scrubbing with brushes and sponge with continuous spraying water can be executed. If grime still stays around the facades, brushing and sponging with mild detergent can be achieved.
Caution
Care must be taken while following this method that the water pressure is uniform understanding that the cleaning should be first done horizontally and after that vertically. If the elimination of wax, oil or polish is required through the surface then MEK (Methyl Ethyl Ketone) or perhaps an equivalent solvent is usually recommended though how's that for carried out very meticulously since the utilization of any chemicals might result in the harm to organic sealants, gaskets and finishes. It is also advisable to never start using these solvents for anodic finishes which might be protected by clear organic coatings unless the coatings have to be removed.

mặt dựng aluminium
Abrasive Cleaning
Abrasive cleaning is required if the facades have heavy surface soils on the surface. This is cleansed having an abrasive cleaning pad which is why the material is thoroughly soaked with water that is clean or even a mild detergent cleaner and the surface is hand scrubbed applying uniform pressure. Scrubbing may also be carried out with a nylon-cleaning pad soaked with a surface protectant material and it is usually utilized for removing stubborn soils and stains.
Caution
In abrasive cleaning, the scrubbing should be done in direction of the metal grain along with the surface must be rinsed thoroughly with clean water so that the entire residue is taken off. The surface should then be air-dried or wiped using a chamois, squeegee or lint-free cloth.
Other Precautions
While aluminium facades are among the easiest ones to take care of and clean, still some precaution should be exercised before you go up with the procedures. Having identified the outer lining area that needs attention, appropriate cleaning methods should also be identified based on the area. It can be advised to not use quite strong alkaline or acid cleaners.

Also cleaning hot, sun-heated surfaces needs to be avoided since they may lead to chemical reactions that could be highly accelerated and also uniform cleaning is probably not achieved. Anodized aluminium probably won't get suffering from the application of strong organic solvents but will increase the risk for extraction of stain-producing chemicals from sealants and might affect its function. Also, using strong cleaners is just not advisable on glass windows since this might meet aluminium and excessive abrasive rubbing must be avoided so as to avoid the finish.

With one of these tips, proper aluminium facades may be accomplished with slight meticulous planning; thus being sure that original sheen and newness of this wonder metal is retained and maintained.
Nidaplast Launches Its Innovations from the Asian Market
Inside a context of increasingly scarce and costly unprocessed trash, Nidaplast has come up with several new solutions through applications that combine nidaplast�8* honeycomb with traditional materials such as wood or marble, or with heavier materials such as fibre-reinforced concrete, steel, etc. The structural sandwich panels manufactured by nidaplast composites possess the benefit of being both cost-effective and eco-friendly. Because they use less material (a sandwich panel having a 7 mm-thick marble layer can replace a typical 20 mm-thick sheet of marble), they're lighter, thereby saving on fuel consumption and reducing exhaust emissions. Fortunately they are stiffer and offer new advantages like thermal and acoustic insulation, as well as greater impact and fatigue-resistance without needing to increase the material.