There is now an electrical tools and equipment for performing almost every job. Most devices look simple at first, making it seem that everyone can get started right away. However, it remains risky, because they remain dangerous tools. After all, many accidents happen due to unwise use of the operator or the power tools in nigeria is used for something for which it is not intended.
What about electricity voltage?
Do you work with electricity? Then you must be alert at all times, it is possible that you will receive an electric shock. Once you receive a shock, the muscles contract very quickly and forcefully. A cardiac arrest can then possibly be the result of a shock.
Did you know that a tension can be deadly from:
- AC voltage: 50 Volts;
- DC voltage: 120 Volt.
AC voltage:
At alternating voltage, electrons travel from the positive pole to the negative pole and vice versa. So the current changes direction constantly. The amount per second is called the frequency. In Europe, the current changes direction fifty times per second, so the frequency is 50 Hertz. The nigerian energy network is based on alternating voltage and a socket therefore works on the basis of alternating voltage.
DC voltage:
At DC voltage, electrons only travel from the plus pole to the minus pole; the current, in fact, always flows in the same direction. Most electrical appliances and installations work on a DC voltage, but sockets work on AC voltage. This is not a problem, because converting AC voltage to DC voltage is relatively simple. This is usually done using a device battery or adapter.
Lower voltages are certainly no less dangerous. This can also generate a lot of heat, which can cause nasty burns. Moreover, a fall usually follows a not so severe electric shock, because the victim flinches backwards.
What should you pay attention to when using electrical tools and equipment?
Before you can start working with electrical tools and equipment, it is recommended to read the user manual carefully.
- Be sure to wear clothes that cannot be caught by the moving parts while performing;
- Do not wear chains or similar jewelry while working. Also make sure that any beard or long hair is tied up;
- Never hold the part to be machined with your hands, but clamp it with a tool.
- Let electrical appliances turn off by themselves at all times. Never slow it down with your hands;
- Do not pull the tool towards you by the cord or air hose. After all, there is always a chance that the ''on and off'' button will be hit and the tool ''start''.
- Consider hearing protection during work. Many electrical appliances produce so much noise that hearing protection is necessary.
Inspection of electrical tools and equipment
For certain power tools in nigeria, written safety instructions must be received regarding their safe use, inspection, maintenance and dangers. These instructions must be drawn up in the English language and in comprehensible text.
It is important that you work with only approved electrical tools and equipment at all times!
Below you will find a number of tips regarding the inspection of (hand) tools:
- Before you start work, check whether the inspection sticker is present and falls within the period for re-inspection;
- Electrical (hand) tools must be inspected at least once a year by an authorized person;
- Never repair damage to the devices yourself.
9jabizz Nigeria strives to provide information all its online buyer with safe devices. If there is any doubt about the safety of the tools, the buyer must always inform the contact person. In this way we can provide our buyer with good power tools in nigeria. After all, 9jabizz Nigeria cannot afford buyer working with unapproved or unsafe tools. Are you aware or suspect that your colleague works with irresponsible tools? Let your colleague know as soon as possible! Prevention is of course better than cure.