[ 0.000000] Machine model: Libre Computer AML-S905X-CC
[ 0.000000] efi: EFI v2.100 by Das U-Boot
[ 0.000000] efi: RTPROP=0x74e90040 SMBIOS=0x74e8f000 RNG=0x53e89040 MEMRESERVE=0x53e88040
[ 0.000000] random: crng init done
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000064c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000074e8efff]
[ 0.000000] node 0: [mem 0x0000000074e8f000-0x0000000074e90fff]
[ 0.000000] node 0: [mem 0x0000000074e91000-0x0000000074e91fff]
[ 0.000000] node 0: [mem 0x0000000074e92000-0x0000000074e97fff]
[ 0.000000] node 0: [mem 0x0000000074e98000-0x000000007deaffff]
[ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff]
[ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007fe5afff]
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 29 pages/cpu s80744 r8192 d29848 u118784
[ 0.000000] pcpu-alloc: s80744 r8192 d29848 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.43-08467-g9b183cb29b85 root=UUID=c501a564-a676-4b79-8eeb-0edbed16de28 ro noquiet
[ 0.000000] Unknown kernel command line parameters "noquiet BOOT_IMAGE=/boot/vmlinuz-6.1.43-08467-g9b183cb29b85", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1703296K/2097152K available (18752K kernel code, 3570K rwdata, 14164K rodata, 7488K init, 804K bss, 131712K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 59219 entries in 232 pages
[ 0.000000] ftrace: allocated 232 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] Dynamic Preempt: full
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000634] Console: colour dummy device 80x25
[ 0.001141] printk: console [tty0] enabled
[ 0.001180] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001204] pid_max: default: 32768 minimum: 301
[ 0.001296] LSM: Security Framework initializing
[ 0.001321] Yama: becoming mindful.
[ 0.001435] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001461] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002819] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002855] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002929] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002944] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003017] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003032] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003209] rcu: Hierarchical SRCU implementation.
[ 0.003222] rcu: Max phase no-delay instances is 1000.
[ 0.004452] Remapping and enabling EFI services.
[ 0.004830] smp: Bringing up secondary CPUs ...
[ 0.005634] Detected VIPT I-cache on CPU1
[ 0.005762] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006613] Detected VIPT I-cache on CPU2
[ 0.006747] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007604] Detected VIPT I-cache on CPU3
[ 0.007727] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007821] smp: Brought up 1 node, 4 CPUs
[ 0.007890] SMP: Total of 4 processors activated.
[ 0.007902] CPU features: detected: 32-bit EL0 Support
[ 0.007912] CPU features: detected: 32-bit EL1 Support
[ 0.007925] CPU features: detected: CRC32 instructions
[ 0.008001] CPU: All CPU(s) started at EL2
[ 0.008019] alternatives: applying system-wide alternatives
[ 0.009993] devtmpfs: initialized
[ 0.015786] Registered cp15_barrier emulation handler
[ 0.015827] Registered setend emulation handler
[ 0.016047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.016080] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.022283] pinctrl core: initialized pinctrl subsystem
[ 0.022561] regulator-dummy: no parameters, enabled
[ 0.022842] SMBIOS 3.0 present.
[ 0.022872] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2023.07+ 07/01/2023
[ 0.023286] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.024409] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.024727] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.024901] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.024991] audit: initializing netlink subsys (disabled)
[ 0.025303] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
[ 0.026504] thermal_sys: Registered thermal governor 'fair_share'
[ 0.026518] thermal_sys: Registered thermal governor 'step_wise'
[ 0.026538] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.026625] cpuidle: using governor menu
[ 0.026776] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.026901] ASID allocator initialised with 32768 entries
[ 0.039089] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.040414] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector
[ 0.040765] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
[ 0.042757] KASLR enabled
[ 0.049976] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.050011] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.050025] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.050036] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.050049] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.050060] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.050072] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.050084] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.117328] raid6: neonx8 gen() 2140 MB/s
[ 0.185417] raid6: neonx4 gen() 2192 MB/s
[ 0.253493] raid6: neonx2 gen() 2083 MB/s
[ 0.321575] raid6: neonx1 gen() 1781 MB/s
[ 0.389647] raid6: int64x8 gen() 1366 MB/s
[ 0.457731] raid6: int64x4 gen() 1560 MB/s
[ 0.525805] raid6: int64x2 gen() 1402 MB/s
[ 0.593893] raid6: int64x1 gen() 1036 MB/s
[ 0.593906] raid6: using algorithm neonx4 gen() 2192 MB/s
[ 0.661945] raid6: .... xor() 1554 MB/s, rmw enabled
[ 0.661958] raid6: using neon recovery algorithm
[ 0.662223] fbcon: Taking over console
[ 0.662595] VCC_3V3: 3300 mV, enabled
[ 0.662715] reg-fixed-voltage regulator-vcc_3v3: VCC_3V3 supplying 3300000uV
[ 0.662832] VDDIO_AO18: 1800 mV, enabled
[ 0.662915] reg-fixed-voltage regulator-vddio_ao18: VDDIO_AO18 supplying 1800000uV
[ 0.663008] VDDIO_BOOT: will resolve supply early: vin
[ 0.663015] reg-fixed-voltage regulator-vddio_boot: Looking up vin-supply from device tree
[ 0.663027] VDDIO_BOOT: supplied by VCC_3V3
[ 0.663035] VCC_3V3: could not add device link regulator.3: -ENOENT
[ 0.663094] VDDIO_BOOT: 1800 mV, enabled
[ 0.663174] reg-fixed-voltage regulator-vddio_boot: VDDIO_BOOT supplying 1800000uV
[ 0.663640] iommu: Default domain type: Passthrough
[ 0.664013] SCSI subsystem initialized
[ 0.664191] libata version 3.00 loaded.
[ 0.664416] usbcore: registered new interface driver usbfs
[ 0.664467] usbcore: registered new interface driver hub
[ 0.664509] usbcore: registered new device driver usb
[ 0.664952] pps_core: LinuxPPS API ver. 1 registered
[ 0.664966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.664990] PTP clock support registered
[ 0.665119] EDAC MC: Ver: 3.0.0
[ 0.665801] Registered efivars operations
[ 0.666378] FPGA manager framework
[ 0.666489] Advanced Linux Sound Architecture Driver Initialized.
[ 0.667085] NetLabel: Initializing
[ 0.667099] NetLabel: domain hash size = 128
[ 0.667109] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.667169] NetLabel: unlabeled traffic allowed by default
[ 0.667571] clocksource: Switched to clocksource arch_sys_counter
[ 0.667902] VFS: Disk quotas dquot_6.6.0
[ 0.667967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.668110] FS-Cache: Loaded
[ 0.673767] NET: Registered PF_INET protocol family
[ 0.673949] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.675643] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.675744] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.675774] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.675896] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.676291] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.676549] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.676642] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.676695] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.676873] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.677384] RPC: Registered named UNIX socket transport module.
[ 0.677416] RPC: Registered udp transport module.
[ 0.677426] RPC: Registered tcp transport module.
[ 0.677436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.677453] NET: Registered PF_XDP protocol family
[ 0.677475] PCI: CLS 0 bytes, default 64
[ 0.677691] Trying to unpack rootfs image as initramfs...
[ 0.678291] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.678895] kvm [1]: IPA Size Limit: 40 bits
[ 0.681588] kvm [1]: vgic interrupt IRQ9
[ 0.681709] kvm [1]: Hyp mode initialized successfully
[ 1.154806] Initialise system trusted keyrings
[ 1.155145] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.161249] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.162074] NFS: Registering the id_resolver key type
[ 1.162129] Key type id_resolver registered
[ 1.162141] Key type id_legacy registered
[ 1.162224] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.162239] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.163273] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.164710] 9p: Installing v9fs 9p2000 file system support
[ 1.201250] xor: measuring software checksum speed
[ 1.205222] 8regs : 2520 MB/sec
[ 1.209181] 32regs : 2521 MB/sec
[ 1.213496] arm64_neon : 2310 MB/sec
[ 1.213525] xor: using function: 32regs (2521 MB/sec)
[ 1.213553] Key type asymmetric registered
[ 1.213567] Asymmetric key parser 'x509' registered
[ 1.701123] Freeing initrd memory: 22708K
[ 1.718092] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.718204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.718355] io scheduler mq-deadline registered
[ 1.718372] io scheduler kyber registered
[ 1.718507] io scheduler bfq registered
[ 1.719270] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 1.736627] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
[ 1.741023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.750022] loop: module loaded
[ 1.750585] Loading iSCSI transport class v2.0-870.
[ 1.751087] iscsi: registered transport (tcp)
[ 1.752296] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 1.752475] db_root: cannot open: /etc/target
[ 1.755487] tun: Universal TUN/TAP device driver, 1.6
[ 1.756322] VFIO - User Level meta-driver version: 0.3
[ 1.758204] usbcore: registered new interface driver usb-storage
[ 1.759128] i2c_dev: i2c /dev entries driver
[ 1.763367] sdhci: Secure Digital Host Controller Interface driver
[ 1.763401] sdhci: Copyright(c) Pierre Ossman
[ 1.763914] Synopsys Designware Multimedia Card Interface Driver
[ 1.764513] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.765624] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.766807] meson-sm: secure-monitor enabled
[ 1.767366] hid: raw HID events driver (C) Jiri Kosina
[ 1.767520] usbcore: registered new interface driver usbhid
[ 1.767536] usbhid: USB HID core driver
[ 1.767962] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 1.769320] meson-saradc c1108680.adc: Looking up vref-supply from device tree
[ 1.843305] NET: Registered PF_PACKET protocol family
[ 1.844006] 9pnet: Installing 9P2000 support
[ 1.844091] Key type dns_resolver registered
[ 1.845108] registered taskstats version 1
[ 1.845158] Loading compiled-in X.509 certificates
[ 1.850283] zswap: loaded using pool zstd/z3fold
[ 1.851186] Key type .fscrypt registered
[ 1.851219] Key type fscrypt-provisioning registered
[ 1.852648] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 1.868911] phy phy-d0078020.phy.0: Looking up phy-supply from device tree
[ 1.868933] phy phy-d0078020.phy.0: Looking up phy-supply property in node /soc/apb@d0000000/phy@78020 failed
[ 1.872824] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[ 3.216429] printk: console [ttyAML0] enabled
[ 3.226840] meson-gx-mmc d0074000.mmc: Looking up vmmc-supply from device tree
[ 3.226978] meson-gx-mmc d0074000.mmc: Looking up vqmmc-supply from device tree
[ 3.227178] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 3.227955] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 3.246306] HDMI_5V: 5000 mV, enabled
[ 3.246504] reg-fixed-voltage regulator-hdmi-5v: HDMI_5V supplying 5000000uV
[ 3.246788] VCC_CARD: 1800 <--> 3300 mV at 3300 mV, enabled
[ 3.247252] phy phy-d0078000.phy.1: Looking up phy-supply from device tree
[ 3.247276] HDMI_5V: could not add device link phy-d0078000.phy.1: -ENOENT
[ 3.248909] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply from device tree
[ 3.248933] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply property in node /soc/usb@d0078080 failed
[ 3.249119] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 3.249159] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 3.266961] meson-gx-mmc d0074000.mmc: no support for card's volts
[ 3.267522] mmc0: error -22 whilst initialising SDIO card
[ 3.776836] dwc2 c9100000.usb: Looking up vusb_d-supply from device tree
[ 3.776858] dwc2 c9100000.usb: Looking up vusb_d-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.776883] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 3.778485] dwc2 c9100000.usb: Looking up vusb_a-supply from device tree
[ 3.778493] dwc2 c9100000.usb: Looking up vusb_a-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.778508] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 3.785636] dwc2 c9100000.usb: Looking up vbus-supply from device tree
[ 3.785645] dwc2 c9100000.usb: Looking up vbus-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.788344] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 3.795991] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.797917] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.805745] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 3.811477] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 3.820787] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000
[ 3.826858] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.834801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.841950] usb usb1: Product: xHCI Host Controller
[ 3.846777] usb usb1: Manufacturer: Linux 6.1.43-08467-g9b183cb29b85 xhci-hcd
[ 3.853860] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.859147] hub 1-0:1.0: USB hub found
[ 3.862428] hub 1-0:1.0: 2 ports detected
[ 3.869129] meson-gx-mmc d0072000.mmc: Looking up vmmc-supply from device tree
[ 3.869258] meson-gx-mmc d0072000.mmc: Looking up vqmmc-supply from device tree
[ 3.869421] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 3.869906] of_cfs_init
[ 3.873606] of_cfs_init: OK
[ 3.876654] ALSA device list:
[ 3.879209] No soundcards found.
[ 3.900330] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 3.902661] genirq: Setting trigger mode 3 for irq 27 failed (meson_gpio_irq_set_type+0x0/0x70)
[ 3.924687] Freeing unused kernel memory: 7488K
[ 3.951539] mmc1: new high speed SDHC card at address 0001
[ 3.952624] mmcblk1: mmc1:0001 SD16G 7.50 GiB
[ 3.959052] mmcblk1: p1 p2
[ 3.977127] Checked W+X mappings: passed, no W+X pages found
[ 3.977212] Run /init as init process
[ 3.980822] with arguments:
[ 3.980826] /init
[ 3.980830] noquiet
[ 3.980835] with environment:
[ 3.980838] HOME=/
[ 3.980842] TERM=linux
[ 3.980846] BOOT_IMAGE=/boot/vmlinuz-6.1.43-08467-g9b183cb29b85
[ 4.119620] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.269230] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 4.271826] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.278930] usb 1-1: Product: USB2.0 Hub
[ 4.300058] mmc0: Card stuck being busy! __mmc_poll_for_busy
[ 4.339239] hub 1-1:1.0: USB hub found
[ 4.339693] hub 1-1:1.0: 4 ports detected
[ 4.444558] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.444643] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.488411] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 4.489418] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 4.495792] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 4.502584] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 4.508650] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 4.513910] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 4.521237] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 4.528652] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 4.533777] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 4.535683] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 4.540952] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 4.553805] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 4.559521] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 4.565262] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 4.696460] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x83 has an invalid bInterval 32, changing to 9
[ 4.701969] usb 1-2: New USB device found, idVendor=1b3f, idProduct=2247, bcdDevice= 1.00
[ 4.709064] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.716149] usb 1-2: Product: WEB CAM
[ 4.719778] usb 1-2: Manufacturer: WCM_USB
[ 4.783611] usb 1-1.1: new full-speed USB device number 4 using xhci-hcd
[ 4.892590] usb 1-1.1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
[ 4.895828] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.902930] usb 1-1.1: Product: USB Serial
[ 5.320692] BTRFS: device label rootfs devid 1 transid 4474 /dev/mmcblk1p2 scanned by btrfs (222)
[ 5.365026] process '/usr/bin/fstype' started with executable stack
[ 5.494609] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm
[ 5.497400] BTRFS info (device mmcblk1p2): disk space caching is enabled
[ 5.535428] BTRFS info (device mmcblk1p2): enabling ssd optimizations
[ 6.804960] systemd[1]: System time before build time, advancing clock.
[ 6.984125] NET: Registered PF_INET6 protocol family
[ 7.027993] Segment Routing with IPv6
[ 7.028039] RPL Segment Routing with IPv6
[ 7.030053] In-situ OAM (IOAM) with IPv6
[ 7.178744] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.196465] systemd[1]: Detected architecture arm64.
[ 7.291987] systemd[1]: Set hostname to <lepotato>.
[ 7.908716] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid ? /run/fail2ban/fail2ban.pid; please update the unit file accordingly.
[ 7.975201] systemd[1]: Listening on Journal Socket.
[ 8.016300] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.037146] systemd[1]: Mounting Kernel Debug File System...
[ 8.051823] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 8.057136] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.081405] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.837558] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3
[ 9.137248] systemd-journald[323]: Received request to flush runtime journal from PID 1
[ 9.926571] simple-framebuffer 7fe5b000.framebuffer: framebuffer at 0x7fe5b000, 0x195000 bytes
[ 9.926594] simple-framebuffer 7fe5b000.framebuffer: format=x8r8g8b8, mode=720x576x32, linelength=2880
[ 9.927055] Console: switching to colour frame buffer device 90x36
[ 9.931426] simple-framebuffer 7fe5b000.framebuffer: fb0: simplefb registered!
[ 9.932288] simple-framebuffer simple-framebuffer.0: simplefb: cannot reserve video memory at [mem 0x7fe5b000-0x7ffeffff]
[ 9.932353] simple-framebuffer simple-framebuffer.0: framebuffer at 0x7fe5b000, 0x195000 bytes
[ 9.932362] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=720x576x32, linelength=2880
[ 9.932374] simple-framebuffer simple-framebuffer.0: Unable to register simplefb: -16
[ 9.932393] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16
[ 10.096728] t9015-codec c8832000.audio-controller: Looking up AVDD-supply from device tree
[ 10.099468] Error: Driver 'simple-framebuffer' is already registered, aborting...
[ 10.116175] Registered IR keymap rc-empty
[ 10.116284] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
[ 10.116492] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 10.116621] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input0
[ 10.117360] meson-ir c8100580.ir: receiver initialized
[ 10.161407] mc: Linux media interface: v0.10
[ 10.165467] Registered IR keymap rc-cec
[ 10.172406] rc rc1: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc1
[ 10.172589] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc1/input1
[ 10.194302] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 10.194598] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 10.203483] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 10.207673] videodev: Linux video capture interface: v2.00
[ 10.272431] Console: switching to colour dummy device 80x25
[ 10.272652] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff>
[ 10.273195] meson-dw-hdmi c883a000.hdmi-tx: Looking up hdmi-supply from device tree
[ 10.300501] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.303733] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 10.328023] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 10.335965] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 10.338094] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 10.351955] Console: switching to colour frame buffer device 90x36
[ 10.366612] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 10.366632] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 10.380128] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 10.408568] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 10.408719] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 10.408851] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 10.408951] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 10.408993] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 10.409006] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 10.421602] lima d00c0000.gpu: bus rate = 166666667
[ 10.421627] lima d00c0000.gpu: mod rate = 24000000
[ 10.421715] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 10.421729] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 10.421761] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 10.423361] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
[ 10.576981] usb 1-2: Found UVC 1.00 device WEB CAM (1b3f:2247)
[ 10.579199] usb 1-2: Failed to query (GET_INFO) UVC control 2 on unit 1: -32 (exp. 1).
[ 10.582345] usbcore: registered new interface driver usbserial_generic
[ 10.582397] usbserial: USB Serial support registered for generic
[ 10.586414] usbcore: registered new interface driver ch341
[ 10.587823] usb 1-2: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 10.588341] usbserial: USB Serial support registered for ch341-uart
[ 10.588444] ch341 1-1.1:1.0: ch341-uart converter detected
[ 10.607507] usb 1-1.1: ch341-uart converter now attached to ttyUSB0
[ 10.616722] input: WEB CAM: WEB CAM as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/input/input2
[ 10.617138] usbcore: registered new interface driver uvcvideo
[ 10.775467] usb 1-2: Warning! Unlikely big volume range (=5120), cval->res is probably wrong.
[ 10.775491] usb 1-2: [5] FU [Mic Capture Volume] ch = 1, val = 7680/12800/1
[ 10.781147] simple-amplifier analog-amplifier: Looking up VCC-supply from device tree
[ 10.790144] usbcore: registered new interface driver snd-usb-audio
[ 12.940811] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS
[ 13.114513] openvswitch: Open vSwitch switching datapath
[ 14.176970] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 14.250508] meson8b-dwmac c9410000.ethernet eth0: PHY [mdio_mux-0.1:08] driver [Meson GXL Internal PHY] (irq=29)
[ 14.259645] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 14.259672] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 14.261306] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[ 16.184128] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 16.184182] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.797742] ------------[ cut here ]------------
[ 18.797760] Unbalanced IRQ 28 wake disable
[ 18.797778] WARNING: CPU: 3 PID: 801 at kernel/irq/manage.c:907 irq_set_irq_wake+0x15c/0x1a0
[ 18.797800] Modules linked in: rfkill openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 snd_soc_hdmi_codec dw_hdmi_i2s_audio snd_usb_audio ch341 snd_hwdep usbserial uvcvideo snd_usbmidi_lib snd_rawmidi videobuf2_vmalloc snd_seq_device lima gpu_sched crct10dif_ce polyval_ce meson_vdec(C) polyval_generic videobuf2_dma_contig meson_rng v4l2_mem2mem videobuf2_memops videobuf2_v4l2 videobuf2_common meson_dw_hdmi meson_drm amlogic_gxl_crypto dw_hdmi drm_dma_helper videodev crypto_engine rng_core drm_display_helper ao_cec mc meson_ir cec meson_canvas rc_core snd_soc_meson_t9015 display_connector drm_shmem_helper drm_kms_helper snd_soc_meson_aiu snd_soc_meson_codec_glue fb_sys_fops snd_soc_meson_gx_sound_card snd_soc_meson_card_utils scpi_hwmon syscopyarea sysfillrect sysimgblt simplefb efi_pstore snd_soc_simple_amplifier pstore bpf_preload ip_tables x_tables ipv6 crc_ccitt dwmac_generic dwmac_meson8b stmmac_platform stmmac pcs_xpcs phylink rtc_meson_vrtc
[ 18.798013] CPU: 3 PID: 801 Comm: ethtool Tainted: G C 6.1.43-08467-g9b183cb29b85 #1
[ 18.798022] Hardware name: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2023.07+ 07/01/2023
[ 18.798028] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 18.798036] pc : irq_set_irq_wake+0x15c/0x1a0
[ 18.798046] lr : irq_set_irq_wake+0x15c/0x1a0
[ 18.798054] sp : ffff8000096e3b50
[ 18.798057] x29: ffff8000096e3b50 x28: ffff2fb2c9893a00 x27: 0000000000000000
[ 18.798070] x26: 0000000000000000 x25: ffff8000096e3da0 x24: 0000410000004933
[ 18.798082] x23: ffff2fb314b88000 x22: 0000000000000000 x21: 00000000ffffffea
[ 18.798093] x20: 000000000000001c x19: ffff2fb2c4c21a00 x18: ffffffffffffffff
[ 18.798105] x17: 0000000000000000 x16: ffffa6bd354d6280 x15: ffffa6bd37ef1588
[ 18.798116] x14: ffffffffffffffff x13: 656c626173696420 x12: 656b617720383220
[ 18.798128] x11: ffffa6bd37b9a198 x10: ffffa6bd37bf2338 x9 : ffffa6bd354d14e8
[ 18.798139] x8 : 00000000ffffefff x7 : ffffa6bd37bf2338 x6 : 0000000000000000
[ 18.798151] x5 : ffff2fb33fa01a10 x4 : 0000000000000000 x3 : 0000000000000027
[ 18.798162] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff2fb2c9893a00
[ 18.798174] Call trace:
[ 18.798179] irq_set_irq_wake+0x15c/0x1a0
[ 18.798189] stmmac_set_wol+0x7c/0x130 [stmmac]
[ 18.798240] __dev_ethtool+0x12d0/0x1e20
[ 18.798250] dev_ethtool+0x168/0x270
[ 18.798256] dev_ioctl+0x1e4/0x5b0
[ 18.798264] compat_sock_ioctl+0x208/0x360
[ 18.798273] __arm64_compat_sys_ioctl+0x154/0x17c
[ 18.798284] invoke_syscall+0x50/0x120
[ 18.798294] el0_svc_common.constprop.0+0x4c/0x100
[ 18.798303] do_el0_svc_compat+0x28/0x50
[ 18.798311] el0_svc_compat+0x2c/0x8c
[ 18.798319] el0t_32_sync_handler+0x98/0x150
[ 18.798326] el0t_32_sync+0x190/0x194
[ 18.798334] ---[ end trace 0000000000000000 ]---
[ 28.385159] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[ 29.483631] rc rc0: two consecutive events of type space
[ 29.546036] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[ 29.546714] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[ 32.909972] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[ 34.090622] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[ 34.281226] usb 1-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
[11365.601988] usb 1-1.3: new low-speed USB device number 5 using xhci-hcd
[11365.733769] usb 1-1.3: New USB device found, idVendor=04d9, idProduct=1900, bcdDevice= 1.09
[11365.733952] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[11365.734050] usb 1-1.3: Product: DasKeyboard
[11365.825361] input: DasKeyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:1900.0001/input/input3
[11365.893795] hid-generic 0003:04D9:1900.0001: input,hidraw0: USB HID v1.10 Keyboard [DasKeyboard] on usb-xhci-hcd.0.auto-1.3/input0
[11365.912874] input: DasKeyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1900.0002/input/input4
[11365.972661] hid-generic 0003:04D9:1900.0002: input,hidraw1: USB HID v1.10 Device [DasKeyboard] on usb-xhci-hcd.0.auto-1.3/input1
[11456.124571] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[11467.579064] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[11467.645399] meson8b-dwmac c9410000.ethernet eth0: PHY [mdio_mux-0.1:08] driver [Meson GXL Internal PHY] (irq=29)
[11467.656098] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[11467.656143] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[11467.656178] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[11469.565023] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[11469.565085] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[12266.485078] usb 1-1.3: USB disconnect, device number 5
