JustPaste.it

Painting furniture? Give furniture a new look!

Are you planning to give your old furniture a new life? Then paint your furniture. 

 

Painting furniture

Refurbishing old furniture is very hip these days. By giving old or second-hand furniture a new color, you can give it a second life. For example, you can think of a Bone inlay nightstand, a wooden dining room chair, or a bone inlay cabinet. In order to get started with your old furniture in a good way, it is important that you follow the right steps. How can you best paint furniture?  

 

Degrease the furniture with paint cleaner

Before you start painting the furniture, you first create a comfortable working environment. Make sure you have enough space and put a tarpaulin, stucco, or old newspaper on the floor. Secure the tarpaulin or plaster with tape so that you cannot fall over it.

If necessary, tape off the parts where no paint should be on such as hinges or handles. Then you clean the surface of the furniture. A grease and dust-free surface ensures better adhesion of the paint. Cleaning is done by decreasing the surface. This is best done with Alabastine Paint Cleaner. Use a suitable cloth and warm water. Then you sand the surface with P150 - P180 sandpaper. After you have made the surface smooth and free of grease, wipe the surface with a suitable cloth or dustpan.

 

Apply primer to the furniture

After you've thoroughly cleaned the surface, you can start priming the furniture. You do this with a layer of primer. For bone inlay coffee table it is best to use Flexa Primer Wood. Are you going to work with plastic furniture? Then Flexa Primer Universal is the most suitable. Apply a generous coat of primer. First, start with an acrylic brush in the corners and in awkward spots. Then you can paint the large parts with a paint roller.

 

 

Painting the furniture

After the primer has dried, it is wise to lightly sand the surface. When you dust-free the furniture, it is time to paint the furniture! Flexa expert wood lacquer is very well suited for painting the furniture. The combination of this wood lacquer with the primer forms a water-based system for a perfect end result. The corners and awkward spots are best done with an acrylic brush. Use a paint roller for the larger surfaces. Remove the masking tape from the furniture and let the surface dry for 16 hours. Then apply a second coat.

 

Tip:  Do you want to create an authentic, vintage look? Then sand the surface very coarsely after drying. This way the bottom layer becomes slightly visible again and your furniture looks cool and trendy!

coffeetable.jpg

boneinlaysidetableroomatticr50002_white_1510x510600x600.jpg

older furniture can sometimes, in the past, have been treated with an oil or a waxy product. Those pieces of furniture are difficult to paint. If you paint it, the paint layer will disappear, holes will form and the paint will not adhere well. Do a test on a small piece beforehand. This way you can immediately see whether it is going well.