-
- To avoid any damage during shipping, the ij.start.cannon PIXMA T4500 printer is shipped securely in a box.
- You can use scissors to open the carton. Also, make sure all supplies are in good condition.
- Place your Canon printer on a well-ventilated, dust-free surface.
- Protective tapes may be found on your printer.
- The power cable should be inserted at the back of the printer. The other end should connect to the power supply.
- Turn on the ij.start.Canon PIXMA TR4500 printer and adjust the basic settings.
- Place a stack of papers in the rear tray and close it.
- Place the cartridges in the slots.
How do I Print on IJ Start Canon TR4500
- Gently lower the front lid and pull the cassette out till it stops.
- Place the paper width guides at both ends of the paper tray and load it.
- It can be adjusted to fit the paper size.
- The cassette can be pushed back into the ij.start.Canon TR4500 Setup, and the paper information screen will appear on the panel.
- To select the size and type of paper, press the right and left arrows.
- Enter your passphrase by tapping the button in the password input box.
- Tap OK on the keyboard, and then tap OK on screen.
- Go to your computer and install ij.start.Cannon Pixma TR4500 Setup Driver from canon.com/ijsetup.
- Start the Pixma driver installation and select the appropriate prompts for each screen.
- Select 'wireless' on the connection screen and follow the prompts.
- Once the Canon Pixma driver has been installed from canon.com/ijsetup, you will be able to print documents wirelessly from your computer.
IJ Start Canon TR4500 Troubleshooting
With the correct troubleshooting process, any ij.start.cannonprinter problem can be quickly fixed. You can quickly fix errors with the help of these instructions to canon.com/ijsetup. This section addresses issues related to scanning, printing, and copying.
Solve IJ Start Canon TR4500 Not Printing Issue
- Check that the USB cable works correctly if the ij.start.Cannon TR4500 printer fails to connect. The USB cable should not exceed 3m.
- It is best to not connect more than one device to the port, as this could lead to an insufficient power supply.
- If your ij.start.printer cannot connect to a wireless network then check for and remove any obstructions that could reduce the strength of the connection between the printer's router and the printer.
- To improve the signal frequency, remove all metal objects from between the devices.
How do I fix Canon printer not printing?
Ij.start.Cannon printers can fail to print properly for many reasons. You can diagnose the problem by troubleshooting your printer. There are many options in the printer software to troubleshoot your printer. You can fix your ij.start.canon printer problem once you have identified the root cause. Canon printers can be fixed with a variety of tools.
These are the Quick Steps to Fix a Canon Printer Not Printing?
- To fix the Canon printer problem, perform a hard reset.
- Turn off the printer, and then unplug the printer from the wall socket.
- Take the cable out of the printer's rear.
- Allow the printer to rest for at least a minute.
- Without surge protectors, plug the printer straight into the socket.
- Connect the cable from the rear to the Canon printer.
- Turn on the ij.start.canon printer, and then wait for it to stop.
- Test print to see if the printer responds.