pelican after debrick

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.04.28 22:11:58 =~=~=~=~=~=~=~=~=~=~=~=

C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 000005EC
C4
f
5-5
Goto FSBL: 0x10100000
<=============================================>
fsbl_main: sys_secure_type = 0x0000BEEE
fsbl_main: sys_boot_type = 0x00000002
fsbl_main: sys_boot_enc = 0x00000000
fsbl_main: sys_bisr_done = 0x00000000
sys_hwsetting_size:00000600
sys_bootcode_size:0006D900
sys_secure_fsbl_size:00010B00
sys_secure_os_size:00067480
sys_bl31_size:00005040
sys_rsa_key_fw_size:00000000
sys_rsa_key_tee_size:00000000
sys_rescue_size:00026360

HwSetting:
hwsetting_blk_no:00000100
hwsetting_total_size:00000680
hwsetting_blk_count:00000004

Bootcode:
bootcode_blk_no:00000104
bootcode_total_size:0006D920
bootcode_blk_count:0000036D

FSBL:
secure_fsbl_blk_no:00000471
secure_fsbl_total_size:00010B20
secure_fsbl_blk_count:00000086

TEE OS:
secure_os_blk_no:000004F7
secure_os_total_size:000674A0
secure_os_blk_count:0000033B

BL31:
bl31_blk_no:00000832
bl31_total_size:00005060
bl31_blk_count:00000029

RSA Key Fw:
rsa_key_fw_blk_no:0000085B
rsa_key_fw_total_size:00000000
rsa_key_fw_blk_count:00000000

RSA Key TEE:
rsa_key_tee_blk_no:0000085B
rsa_key_tee_total_size:00000000
rsa_key_tee_blk_count:00000000

Rescue:
rescue_blk_no:0000085B
rescue_total_size:00026380
rescue_blk_count:00000132
********** FW_TYPE_GOLD_TEE **********
fwInfo->fwType: 00000023
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10200000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 0009EE00
fwInfo->dataSize: 000674A0
body_size:00067480
flash_unit_no:000004F7
flash_unit_count:0000033B
real_size:0006746C
sha256 Fw
********** FW_TYPE_GOLD_BL31 **********
fwInfo->fwType: 00000028
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10120000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00106400
fwInfo->dataSize: 00005060
body_size:00005040
flash_unit_no:00000832
flash_unit_count:00000029
real_size:00005018
sha256 Fw
********** FW_TYPE_BOOTCODE **********
fwInfo->fwType: 00000001
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 00020000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00020800
fwInfo->dataSize: 0006D920
body_size:0006D900
flash_unit_no:00000104
flash_unit_count:0000036D
real_size:0006D8E8
sha256 Fw
j bootcode jump address:00020000
64b


4.2.2

CPU : Cortex-A53 quad core - AARCH32
Board: Realtek QA Board
DRAM: 256 MiB
Watchdog: Disabled
Cache: Enabled
Non-Cache Region: 1 MB@0x07900000
[SATA] Hardisk exist! turn on power
MMC: rtk_emmc : Detect chip rev. >= B
RTD1295 eMMC: 0
rtk_emmc : Detect chip rev. >= B
mmc->version=0x00010000
version=0x00000004
[LY] cardtype=57, mmc->card_caps=0f
[LY] freq = 00464388, clk diver = 00000080
[LY] speed up emmc at HS-200
[LY] HS-200 bus width=2
[LY] mmc->boot_caps = 20b
TEMP TX_WINDOW=0x7ffffffe, TX_best=0xf
RX_WINDOW=0xffffff81, RX_best=0x13
TX_WINDOW=0x1fffff80, TX_best=0x11
[LY] hs200 : 0
[HC] WPG_SIZE = 8388608
Enter is_pmbr_valid
Warning: failed to 0xEE type in MBR
Device: RTD1295 eMMC
Manufacturer ID: 15
OEM: 100
Name: 4FPD3
Tran Speed: 5f5e100
Rd Block Len: 512
MMC version 4.0
High Capacity: No
Capacity: 3.6 GiB
Bus Width: 8-bit
Speed: HS200
Factory: MMC
Factory: pp:0, seq#:0xa, size:0x2400
------------can't find tmp/factory/000BootParam.h
Set HDMI TX OFF
In: serial
Out: serial
Err: serial
Net: Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
*** Reboot-Action invalid ***
Hit Esc or Tab key to enter console mode or rescue linux: 0
------------can't find tmp/factory/recovery
======== Checking into android recovery ====

reading bootConfig
Filesize: 8 bytes
8 bytes
Size: 8, got: 8

8 bytes read (take 6ms)

[INFO]: bootState: BOOT_STATE_NO_OTA
Start Boot Setup ...
---------------LOAD NORMAL FW TABLE ---------------
[INFO] fw desc table base: 0x00620000, count: 13
Normal boot fw follow...
Rescue DT:
FW Image to 0x01f00000, size=0x0000f2ab (0x01f0f2ab)
FW Image fr 0x06200000
FW Image checksum FAILED
FW Image entry checksum=0x001fd1f6
FW Image result checksum=0x00817b38
==== boot_rescue_from_usb =====
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB XHCI 1.10
scanning bus 1 for devices... Unknown request , typeReq = 0x200c
2 USB Device(s) found
USB2: USB XHCI 1.10
scanning bus 2 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
USB3: USB XHCI 1.10
scanning bus 3 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
scanning usb for storage devices... Enter is_pmbr_valid
Warning: failed to 0xEE type in MBR
1 Storage Device(s) found

1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

3: Mass Storage, USB Revision 2.0
- LGE LG-H815 LGH815fdc4dcf2
- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x18d1 Product 0x2d13 Version 3.16
Configuration: 1
- Interfaces: 2 Bus Powered 500mA
Interface: 0
- Alternate Setting 0, Endpoints: 2
- Class Mass Storage, Transp. SCSI, Bulk only
- String: "Mass Storage"
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 1 Out Bulk MaxPacket 512
Interface: 1
- Alternate Setting 0, Endpoints: 2
- Class Vendor specific
- String: "ADB Interface"
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 2 In Bulk MaxPacket 512

4: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

5: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms


USB device 0: Vendor: Linux Rev: 0310 Prod: File-CD Gadget
Type: Removable Hard Disk
Capacity: 900.0 MB = 0.8 GB (1843200 x 512)
reading wd_uboot.bin

** Unable to read "wd_uboot.bin" from usb 0:1 **
Loading "wd_uboot.bin" from USB failed. Continue installing OS images
reading rescue.emmc.dtb
Filesize: 62849 bytes
62849 bytes
Size: 62849, got: 62849

62849 bytes read (take 60ms)
Loading "rescue.emmc.dtb" to 1f00000 is OK.

reading emmc.uImage
Filesize: 12340736 bytes
12340736 bytes
Size: 12340736, got: 12340736

12340736 bytes read (take 549ms)
Loading "emmc.uImage" to 0x03000000 is OK.

reading rescue.root.emmc.cpio.gz_pad.img
Filesize: 4194304 bytes
4194304 bytes
Size: 4194304, got: 4194304

4194304 bytes read (take 249ms)
Loading "rescue.root.emmc.cpio.gz_pad.img" to 0x02200000 is OK.

reading bluecore.audio
Filesize: 4194304 bytes
4194304 bytes
Size: 4194304, got: 4194304

4194304 bytes read (take 206ms)
Loading "bluecore.audio" to 0x01b00000 is OK.
Start Audio Firmware ...
kylin_bring up hwsetting
Finish kylin_bring_temp hwsetting
[+][AO][aio_HWEnable]
[AO]aio_CRTOn:
SYS_CLOCK_ENABLE1 [ 0x9800000c]: 0x13fe8571
[AO]aio_PowerControlDACOn_clk:
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x580fe416
[AO]aio_PowerControlHDMIOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x585fe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x585fe416
[AO]aio_PowerControlSPDIFOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x587fe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x587fe416
[AO]aio_PowerControlI2SOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x58ffe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x58ffe416
SYS_SOFT_RESET1 [ 0x98000000]: 0xbfda1355
SYS_SOFT_RESET4 [ 0x98000050]: 0x0000801f
[AO]ao_SetDACAnalogOff:
set AIO_O_ACANA_GCTL1 [ 0x98006604]: 0x000a2aac
get AIO_O_ACANA_GCTL1 [ 0x98006604]: 0x24900004
set AIO_I_ACANA_ADC_GCTL2 [ 0x98006610]: 0x880a2a00
[-][AO][aio_HWEnable]
[ACPU] Set protect, start: 0x00000000 end: 0x00001000 moduleid:6
HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO

 

[AO][InitHDMIVideoType]HDMI Frequecny 27, resolution 1


@@@@@@@One Step TV System magic number = 0xc0de0bee, addr = 0xa001f800@@@@@@@
[AUDIO WARNING] ERR UNCACHEABLE_VADDR 0xb8071200 @ 0x81b2e48c

@@@@@@@@@ boot_info->tv_sys.interfaceType 0
[@@VIDEO_RPC_VOUT_ToAgent_ConfigTVSystem_0_svc]type 0!
HDMIOff = 1
[VO]vo->is_hdmi_off_clock_on:0
[@@VIDEO_RPC_VOUT_ToAgent_ConfigVideoStandard_0_svc]
[VO_SetVideoStandard]st 1 p 1 0 0
[VO_SetVideoStandard]ped 1 data0 0x00000004 data1 0x00000000
[VO_SetVideoStandard]HDMIoff 1 is_tve_on 0 user_cvbs_off 1
lvds.format 0 port_setting 0x00000381 lvds_wb 0
[VO setTVStandard 1 3D 0 0]

(TVE) TVE_DAC_mode 0,cmd->enProg 1!!
TV_NTSC_J
~~comp 1, ch2 0, mode_3D 0!!
VO:Disable HDMI interrupt!
VO:HDMI poweroff!
SetVideoStandard return!
[@@VIDEO_RPC_VOUT_ToAgent_ConfigHdmiInfoFrame_0_svc]

(VO_ConfigHDMI_InfoFrame) L:236, is_hdmi_plugin 0, hdmiMode 2!!Mode 2 dataByte1 0x00000000 0x00000000 0x00000000
dataByte4 0x00000000 0x00000000 int0 0x00000000
!!![VO]VO_ConfigHDMI_InfoFrame. There is no tve and hdmi, return.
boot_info 0xa0000000 magic 0xfbfe1fff en 249
[AO][_AO_if_video_HDMI_mode]gpAudio->HDMI_output_en = 0
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
Info: Try to add new node /factory...
*****************************************
factory {
bootstate = "0";
bna = "0";
nbr = "F";
cbr = "B";
ver = "4.2.2";
serial = "*************";
ipaddr = "192.168.100.1";
ethaddr = "*************";
};
*****************************************


EXPORT ENV AT 0x10000000, ENV size info:0x00002000,0x00001ffc,0x00000004
rtk_preload_bootimages_emmc : load U-Boot 64 from 0x00034f80 to 0x01500000 with size 0x00100000
copy_2nd_bootloader_and_run : src:0x01500000, dst:0x00021000, size:0x00028000
Jumping to 2nd bootloader...


U-Boot 2015.07-g5a4a178-dirty (Jun 22 2016 - 11:33:46 +0800)

CPU : Cortex-A53 Quad Core
Board: Realtek QA Board
DRAM: 1 GiB
mapping memory 0x20000000-0x40000000 non-cached
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
rtk_plat_set_fw not port yet, use default configs
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
reserving fdt memory region: addr=0 size=30000
reserving fdt memory region: addr=1f000 size=1000
reserving fdt memory region: addr=30000 size=d0000
reserving fdt memory region: addr=1b00000 size=400000
reserving fdt memory region: addr=1ffe000 size=4000
reserving fdt memory region: addr=10000000 size=14000
reserving fdt memory region: addr=2200000 size=400000
reserving fdt memory region: addr=3200000 size=b800000
reserving fdt memory region: addr=2600000 size=c00000
reserving fdt memory region: addr=11000000 size=3c00000
Using Device Tree in place at 0000000001f00000, end 0000000001f12580
Bring UP slave CPUs

Starting Kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.17 (jan@debian) (gcc version 4.9.4 20150629 (prerelease) (Realtek ASDK64-4.9.4p1 Build 2285) ) #1 SMP PREEMPT Tue Apr 7 13:55:27 CEST 2020 (commit id:)
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
[ 0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: fdt region 0
[ 0.000000] cma: size 0x0000000002000000, base 0x0000000020000000, fixed(1)
[ 0.000000] cma: Reserved 32 MiB at 0x0000000020000000
[ 0.000000] PERCPU: Embedded 18 pages/cpu @ffffffc03ff6b000 s33280 r8192 d32256 u73728
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257536
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0x3fc7c000-0x3fd7c000] (1MB) mapped at [ffffffc03fc7c000-ffffffc03fd7bfff]
[ 0.000000] Memory: 709940K/1046528K available (7710K kernel code, 823K rwdata, 2812K rodata, 616K init, 619K bss, 303820K reserved, 32768K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc000cc9000 - 0xffffffc000d63000 ( 616 KB)
[ 0.000000] .text : 0xffffffc000280000 - 0xffffffc000cc8af4 ( 10531 KB)
[ 0.000000] .data : 0xffffffc000d77000 - 0xffffffc000e44e00 ( 824 KB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[ 0.000007] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[ 0.009123] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN
[ 0.015309] [RTK-TIMER0] clocksource 0 register HZ
[ 0.020709] clocksource rtk_timer0_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns
[ 0.032340] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_UNUSED
[ 0.038328] [RTK-TIMER1] set mode: CLOCK_EVT_MODE_SHUTDOWN
[ 0.044510] [RTK-TIMER1] clocksource 1 register HZ
[ 0.049911] clocksource rtk_timer1_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns
[ 0.061882] [RTK_MEM_REMAP] initialized
[ 0.066692] Console: colour dummy device 80x25
[ 0.071710] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[ 0.083392] pid_max: default: 32768 minimum: 301
[ 0.088722] Security Framework initialized
[ 0.093375] SELinux: Initializing.
[ 0.097465] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.105034] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.113932] Initializing cgroup subsys blkio
[ 0.118765] Initializing cgroup subsys memory
[ 0.123706] Initializing cgroup subsys devices
[ 0.128717] Initializing cgroup subsys freezer
[ 0.133743] Initializing cgroup subsys net_cls
[ 0.138758] Initializing cgroup subsys net_prio
[ 0.143898] ftrace: allocating 26169 entries in 103 pages
[ 0.215837] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.224997] EFI services will not be available.
[ 0.285374] pctrl-rtk: 9800000c: value [0x13fec471 -> 0x137ec461], clear-bits 0x00800010, mask 0xec803012
[ 0.296204] pctrl-rtk: 98000010: value [0x58ffe416 -> 0x58ff0414], clear-bits 0x0000e002, mask 0x0100e0a2
[ 0.307027] pctrl-rtk: 9800708c: value [0x00001f01 -> 0x00001901], clear-bits 0x00000600, mask 0x000006f8
[ 0.317850] pctrl-rtk: 98000000: value [0xbfda0355 -> 0x9fda0001], clear-bits 0x20000354, mask 0x60000354
[ 0.328673] pctrl-rtk: 98000004: value [0x1f840e3d -> 0x0f840e01], clear-bits 0x1000003c, mask 0x507be1fc
[ 0.339495] pctrl-rtk: 98000050: value [0x0000801f -> 0x0000801f], clear-bits 0x00000000, mask 0x00007020
[ 0.350319] pctrl-rtk: 98007088: value [0x00001f80 -> 0x00001f80], clear-bits 0x00000000, mask 0x00002062
[ 0.361199] pctrl-rtk: pctrl_ve1::POWER_OFF, ret = 0
[ 0.366901] pctrl-rtk: pctrl_ve2::POWER_OFF, ret = 0
[ 0.372616] pctrl-rtk: pctrl_ve3::POWER_OFF, ret = 0
[ 0.378372] pctrl-rtk: pctrl_gpu::POWER_OFF, ret = 0
[ 0.384101] pctrl-rtk: pctrl_gpu_core_1::POWER_OFF, ret = 0
[ 0.390499] pctrl-rtk: pctrl_gpu_core_2::POWER_OFF, ret = 0
[ 0.396925] pctrl-rtk: pctrl_gpu_core_3::POWER_OFF, ret = 0
[ 0.403689] pctrl-rtk: pctrl_mhl3_en::POWER_OFF, ret = 0
[ 0.411200] pctrl-rtk: pctrl_usb_p3_mac_A: rev not match
[ 0.417685] pctrl-rtk: pctrl_cr::POWER_OFF, ret = 0
[ 0.423369] pctrl-rtk: pctrl_sdio::POWER_OFF, ret = 0
[ 0.443681] CPU1: Booted secondary processor
[ 0.443690] Detected VIPT I-cache on CPU1
[ 0.463687] CPU2: Booted secondary processor
[ 0.463694] Detected VIPT I-cache on CPU2
[ 0.483703] CPU3: Booted secondary processor
[ 0.483710] Detected VIPT I-cache on CPU3
[ 0.483795] Brought up 4 CPUs
[ 0.515093] SMP: Total of 4 processors activated.
[ 0.520389] CPU: All CPU(s) started at EL2
[ 0.525036] alternatives: patching kernel code
[ 0.530899] devtmpfs: initialized
[ 0.552674] clk-rtk: scpu,pll,workaround 34055501 04038500
[ 0.566147] DMI not present or invalid.
[ 0.570881] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.583772] pinctrl core: initialized pinctrl subsystem
[ 0.590765] NET: Registered protocol family 16
[ 0.597280] vdso: 2 pages (1 code @ ffffffc000d7d000, 1 data @ ffffffc000d7c000)
[ 0.605663] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.614629] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.622167] rst-control : base ffffff8000388600, offset 0xb4
[ 0.628653] ****** rtk_lockapi_init 609, chip: id=0x00000000, revision=0x00010000
[ 0.637528] [PINCTRL] driver init
[ 0.644487] [PINCTRL] init done
[ 0.650652] [RTK_DCSYS_DBG] DC_EC_CTRL(0x98008300) = 70c0000
[ 0.657076] [RTK_DCSYS_DBG] initialized
[ 0.665333] [GPIO] No default gpio need to set
[ 0.681057] console [pstore-1] enabled
[ 0.685319] pstore: Registered ramoops as persistent store backend
[ 0.692310] ramoops: attached 0x200000@0x22000000, ecc: 0/0
[ 0.733803] [RTD129x_PM] Initial RTD129x Power Management Driver.
[ 0.742523] [RTD129x_PM] wakeup-gpio Cnt: en(3) act(3) list(3)
[ 0.749122] [RTD129x_PM] wakeup-gpio[0] States is disable! (en:0 act:1 gpio:115)
[ 0.757587] [RTD129x_PM] wakeup-gpio[1] States is disable! (en:0 act:1 gpio:134)
[ 0.766001] [RTD129x_PM] wakeup-gpio[2] Successful registration! (en:1 act:0 gpio:123)
[ 0.774943] [RTD129x_PM] gpio-output-change Cnt: en(0) act(0) list(-2)
[ 0.782300] [RTD129x_PM] Set suspend-mode = ram
[ 0.787429] [RTD129x_PM] Wakeup Flags Set Default : 0x2e
[ 0.793869] SCSI subsystem initialized
[ 0.798562] usbcore: registered new interface driver usbfs
[ 0.804821] usbcore: registered new interface driver hub
[ 0.811099] usbcore: registered new device driver usb
[ 0.816900] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ENTER rtk_usb_power_manager_probe
[ 0.827166] rtk-usb-power-manager 98000000.rtk_usb_power_manager: Error u2host-power-gpio no found
[ 0.837330] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_drd status is okay
[ 0.846948] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3host status is okay
[ 0.856880] rtk-usb-power-manager 98000000.rtk_usb_power_manager: set usb_power_domain/p3 on
[ 0.872460] rtk-usb-power-manager 98000000.rtk_usb_power_manager: Realtek USB init 5/5 OK (CRT_SOFT_RESET1=9fda0355, CRT_SOFT_RESET2=f840e3d, CRT_CLOCK_ENABLE1=137ec471)
[ 0.889656] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_probe OK (take 70 ms)
[ 0.904154] Advanced Linux Sound Architecture Driver Initialized.
[ 0.912181] Switched to clocksource arch_sys_counter
[ 0.964693] FS-Cache: Loaded
[ 0.968410] [m rtk_ion_probe[m
[ 0.972076] [m rtk_ion_probe nr_heaps:5[m
[ 0.982258] [mrtk_ion_probe: adding heap Audio of type 8 with 2600000@c00000 (type:GEN_POOL)[m
[ 1.094152] [mrtk_ion_probe: adding heap Media of type 7 with 20000000@2000000 (type:CMA_POOL)[m
[ 1.104271] [mrtk_ion_probe: adding heap Media of type 7 with 11000000@3c00000 (type:GEN_POOL)[m
[ 1.114387] [mrtk_ion_probe: adding heap Media of type 7 with 3200000@b800000 (type:GEN_POOL)[m
[ 1.138041] NET: Registered protocol family 2
[ 1.143833] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.151919] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.159534] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.166778] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.173511] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.181033] NET: Registered protocol family 1
[ 1.186337] Trying to unpack rootfs image as initramfs...
[ 1.357611] Freeing initrd memory: 4096K (ffffffc002200000 - ffffffc002600000)
[ 1.368907] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.376072] audit: initializing netlink subsys (disabled)
[ 1.382260] audit: type=2000 audit(1.189:1): initialized
[ 1.389786] VFS: Disk quotas dquot_6.6.0
[ 1.394308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.403162] fuse init (API version 7.23)
[ 1.410333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.418708] io scheduler noop registered
[ 1.423159] io scheduler deadline registered
[ 1.428022] io scheduler cfq registered (default)
[ 1.434294] [m[ rtk_fb_probe]
[ 1.434294] [m
[ 1.439966] [m[ rtk_fb_update_by_memory] [720 x 480] addr:0xe75d000 size:0x2a3000 irq:0
[ 1.439966] [m
[ 1.451069] [m[ rtk_fb_update_by_memory] numberofbuffers 2
[ 1.451069] [m
[ 1.459338] I/DC: ALLOC DC INFO BUFFER!
[ 1.463681] I/DC: rpc_common_base:ffffff800000c000 ipc:ffffff800000c0c4
[ 1.471278] I/DC: [DC_Init 1624]
[ 1.475656] corectrl: CPU List = [ 1-3 ]
[ 1.480746] [SB2 DBG][sb2_dbg_init] memory monitor 0x98013b00 - 0x98013c00
[ 1.488516] [SB2 DBG][sb2_dbg_init] initialized
[ 1.493988] [31mrpc is not paused & suspended[m
[ 1.501009] rpc_int_base:ffffff800038a104 irq:27
[ 1.506197] [PUWRAP] begin pu_init
[ 1.510229] [PUWRAP] end pu_init result=0x0
[ 1.515087] [PUWRAP] pu_probe
[ 1.518477] [PUWRAP] success to probe pu wrapper device with USE_ION_ALLOCATOR
[ 1.527119] res.start:0x98007028, bonding_value:0x800
[ 1.532855] [VPUDRV] : get clock controller s_vpu_clk_ve1=0xffffffc03e356440
[ 1.540808] [VPUDRV] : get clock controller s_vpu_clk_ve2=0xffffffc03e356400
[ 1.549198] VE3: ve3_probe
[ 1.552293] VE3 : base address get from DTB physical base addr=0x98048000, virtual base=0xffffff80005d0000, size=0x4000(actually=0x424)
[ 1.566282] VE3: get clock controller s_ve3_clk=0xffffffc03e356180
[ 1.573267] ve3_pctrl_on
[ 1.592207] Get cti: 0x12
[ 1.595158] VE3: dec kernel module.
[ 1.599184] VE3: Init single core at 0x 98048000 IRQ=22
[ 1.605774] VE3: core[0] has HEVC
[ 1.609507] VE3: core[0] has VP9
[ 1.613155] VE3: core[0] has PP
[ 1.61693
[ROS: openRPC() intr_scpu_dev_r buf 0x00e2ffa1 s 0x00e2ffa1 e 0x00e4ffa1 i 0x00e2ffa1
[ROS: openStubRPC() intr_w buf 0x00e6ffa1 s 0x00e6ffa1 e 0x00e8ffa1 i 0x00e6ffa1[AVCPU] Set Debug level flag 0x81dca52c *flag 0x01dbba78 ucache 0xa1dbba78
[AVCPU] Set Debug level *ptrDebugFlag 0x00000001
-------------------
Audio Version = 1001832 (Kylin)
Common Version = 0
Binary src compiled at Nov 11 2016 15:07:40
Note =
-------------------

 


[A] gloabl malloc size 0x003ffeb8
7] VE3: module inserted. Major = 0
[ 1.662726] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[ 1.662736] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81dc9cfd atomic
[ 1.689235] ve3_pctrl_off
[ 1.692323] memalloc: Linear Memory Allocator
[ 1.697577] jpu_probe
[ 1.700168] [JPUDRV] : jpu base address get from DTB physical base addr=0x9803e000, virtual base=0xffffff8000426000, size=0x1000
[ 1.713439] [JPUDRV] : get clock controller s_jpu_clk=0xffffffc03e5ea9c0
[ 1.721027] s_jpu_irq:19 want to register jpu_irq_handler
[ 1.727175] [JPUDRV] success to probe jpu device with non reserved video memory
[ 1.735544] jpu_init
[ 1.738006] end jpu_init result=0x0
[ 1.741947] [MCP] Info, mcp_base: 0xffffff8000436000
[ 1.747558] [MCP] Info, tp_base: 0xffffff800043e000
[ 1.753499] misc rtk_lockapi: registered.
[ 1.885958] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.895753] console [ttyS0] disabled
[ 1.899870] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 194, base_baud = 1687500) is a 16550A
[ 1.910177] console [ttyS0] enabled
[ 1.910177] console [ttyS0] enabled
[ 1.917695] bootconsole [uart0] disabled
[ 1.917695] bootconsole [uart0] disabled
[ 1.928085] rtd1295-rng 9801aa00.rng: hwrng registered
[ 1.946028] brd: module loaded
[ 1.955481] loop: module loaded
[ 1.959135] [SATA] Debug version V1.0.0
[ 1.963347] [PINCTRL] Set GPIO(61) PULL_UP
[ 1.963347]
[ 1.969299] [PINCTRL] Set GPIO(63) PULL_UP
[ 1.969299]
[ 1.995875] [SATA] spread-spectrum disable
[ 2.042089] [SATA] Port0 TXDRV0 = 0x94a72011
[ 2.047486] [SATA] Port0 TXDRV1 = 0x94a76011
[ 2.052868] [SATA] Port0 TXDRV2 = 0x94a7a011
[ 2.058249] [SATA] Port0 TXDRV3 = 0x387a2111
[ 2.063643] [SATA] Port0 TXDRV4 = 0x387a6111
[ 2.069024] [SATA] Port0 TXDRV5 = 0x387aa111
[ 2.097425] [SATA] spread-spectrum disable
[ 2.143635] [SATA] Port1 TXDRV0 = 0x94a72011
[ 2.149016] [SATA] Port1 TXDRV1 = 0x94a76011
[ 2.154413] [SATA] Port1 TXDRV2 = 0x94a7a011
[ 2.159793] [SATA] Port1 TXDRV3 = 0x587a2111
[ 2.165270] [SATA] Port1 TXDRV4 = 0x587a6111
[ 2.170651] [SATA] Port1 TXDRV5 = 0x587aa111
[ 2.179266] tun: Universal TUN/TAP device driver, 1.6
[ 2.184468] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.191223] r8169 Gigabit Ethernet driver 2.10WD-4-NAPI loaded
[ 2.213246] r8169 98016000.gmac eth0: RTL8168g/8111g at 0xffffff8000486000, XID 10900800 IRQ 12
[ 2.222167] r8169 98016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.231136] [Ethernet] Watch link status change.
[ 2.231292] PPP generic driver version 2.4.2
[ 2.231542] PPP BSD Compression module registered
[ 2.231554] PPP Deflate Compression module registered
[ 2.231581] PPP MPPE Compression module registered
[ 2.231636] rtk_rbus_init:89
[ 2.231741] rtk_rbus_probe:27
[ 2.232155] rtk_refclk_init:89
[ 2.232326] rtk_refclk_probe:27
[ 2.233105] rtk_se_probe: res.start=0x000000009800c000 res.end=0x000000009800cfff
[ 2.233114] rtk_se_probe: mem[0] phys:0x000000009800c000 virt:0xffffff800049e000 size:0x1000 type:1 name:SE reg space
[ 2.236089] rtk_se_probe: mem[1] phys:0x0000000020040000 virt:0xffffff80004a5000 size:0x1000 type:1 name:SE driver data
[ 2.236143] rtk_se_probe: mem[2] phys:0x0000000020048000 virt:0xffffff8000776000 size:0x8000 type:1 name:SE command queue
[ 2.236182] rtk_se_probe: irq=24
[ 2.236570] Engine[0] Ctrl:00000004 Base:20048000 ReadPtr:20048000 WritePtr:20048000 Limit:2004c000
[ 2.236580] Engine[1] Ctrl:00000004 Base:2004c000 ReadPtr:2004c000 WritePtr:2004c000 Limit:20050000
[ 2.237078] rtk_md_probe: res.start=0x000000009800b000 res.end=0x000000009800bfff
[ 2.237086] rtk_md_probe: mem[0] phys:0x000000009800b000 virt:0xffffff80004b6000 size:0x1000 type:1 name:MD reg space
[ 2.237176] rtk_md_probe: mem[1] phys:0x0000000020041000 virt:0xffffff80004bd000 size:0x1000 type:1 name:MD driver data
[ 2.237217] rtk_md_probe: mem[2] phys:0x0000000020044000 virt:0xffffff80005bb000 size:0x4000 type:1 name:MD command queue
[ 2.237254] rtk_md_probe: irq=23
[ 2.237615] Engine[0] Ctrl:0000000c Base:20044000 ReadPtr:20044000 WritePtr:20044000 Limit:20048000
[ 2.237886] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: Probe RTK USB 2.0 RLE0599 PHY
[ 2.238213] rtk-usb2phy 98028280.dwc3_drd_usb2phy: Probe RTK USB 2.0 PHY
[ 2.238305] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: Probe RTK USB 2.0 PHY
[ 2.238399] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: Probe RTK USB 2.0 PHY
[ 2.238698] rtk-usb3phy 98013210.dwc3_drd_usb3phy: Probe RTK USB 3.0 PHY
[ 2.238783] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: Probe RTK USB 3.0 PHY
[ 2.239286] rtk-dwc3 98013200.rtk_dwc3_drd: Probe Realtek-SoC USB DWC3 Host Controller
[ 2.239652] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Enter ..
[ 2.239661] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work for 98013200.rtk_dwc3_drd
[ 2.239677] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Exit ..
[ 2.239685] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe_work Start ...
[ 2.239689] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe ok! (take 0 ms)
[ 2.239774] rtk-dwc3 98013e00.rtk_dwc3_u3host: Probe Realtek-SoC USB DWC3 Host Controller
[ 2.240111] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Enter ..
[ 2.240119] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work for 98013e00.rtk_dwc3_u3host
[ 2.240148] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Exit ..
[ 2.240157] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe ok! (take 0 ms)
[ 2.240162] dwc3 98020000.dwc3_drd: rtk dwc3 fixed dwc3 globals register start address 0xffffff8000788100
[ 2.240391] rtk-usb3phy 98013210.dwc3_drd_usb3phy: Init RTK USB 3.0 PHY
[ 2.241452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.241482] ehci-rtk: EHCI realtek driver init
[ 2.241735] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.242103] usbcore: registered new interface driver usb-storage
[ 2.242483] rtk-usb3phy 98013210.dwc3_drd_usb3phy: ############ to toggle 0x09 BIT(9)
[ 2.242981] mousedev: PS/2 mouse device common for all mice
[ 2.243511] rtc_rtd1295 9801b600.rtc: rtk_rtc_probe 371
[ 2.243524] rtc_rtd1295 9801b600.rtc: early rtk_base_year = 2014
[ 2.243532] rtc_rtd1295 9801b600.rtc: early rtk_base_month = 1
[ 2.243539] rtc_rtd1295 9801b600.rtc: early rtk_base_day = 1
[ 2.243546] rtc_rtd1295 9801b600.rtc: KML rtk_force_reset = 0
[ 2.243590] rtc_rtd1295 9801b600.rtc: early rtk_rtc_base = 0xffffff8000546600
[ 2.243598] rtc_rtd1295 9801b600.rtc: early rtk_iso_base = 0xffffff8000556000
[ 2.243606] rtc_rtd1295 9801b600.rtc: rtk_rtc rtcacr = 0x80
[ 2.243614] rtc_rtd1295 9801b600.rtc: rtk_rtc already enabled
[ 2.243621] rtc_rtd1295 9801b600.rtc: enable REG_SEC = 0x62
[ 2.243628] rtc_rtd1295 9801b600.rtc: enable REG_MIN = 0x2d
[ 2.243634] rtc_rtd1295 9801b600.rtc: enable REG_HR = 0x2
[ 2.243641] rtc_rtd1295 9801b600.rtc: enable REG_DATA_LOW = 0x0
[ 2.243648] rtc_rtd1295 9801b600.rtc: enable REG_DATE_HIGH = 0x0
[ 2.243655] rtc_rtd1295 9801b600.rtc: reset bit 0xf840e3d
[ 2.243663] rtc_rtd1295 9801b600.rtc: clock bit 0x5effe416
[ 2.243768] rtc_rtd1295 9801b600.rtc: sec=0x31 , min=0x2d . day=0x0
[ 2.243780] rtc_rtd1295 9801b600.rtc: time read as 2014.01.01 02:45:49
[ 2.244033] rtc_rtd1295 9801b600.rtc: rtc core: registered rtc as rtc0
[ 2.244144] i2c /dev entries driver
[ 2.245758] rtk_watchdog_probe: rtk watchdog driver init
[ 2.245778] rtk_watchdog_probe: RTK Watchdog base address 0xffffff800055e680
[ 2.245783] kick watchdog threshold (120000 ms)
[ 2.245788] disable watchdog reset
[ 2.245908] md: linear personality registered for level -1
[ 2.245922] md: raid0 personality registered for level 0
[ 2.245936] md: raid1 personality registered for level 1
[ 2.246422] cpufreq: freq_table: frequency-table,rev1:
[ 2.246428] cpufreq: 0 .volidx = 0 .freq = 300000
[ 2.246433] cpufreq: 1 .volidx = 0 .freq = 400000
[ 2.246439] cpufreq: 2 .volidx = 0 .freq = 500000
[ 2.246443] cpufreq: 3 .volidx = 2 .freq = 600000
[ 2.246448] cpufreq: 4 .volidx = 3 .freq = 700000
[ 2.246453] cpufreq: 5 .volidx = 4 .freq = 800000
[ 2.246458] cpufreq: 6 .volidx = 5 .freq = 900000
[ 2.246463] cpufreq: 7 .volidx = 6 .freq = 1000000
[ 2.246468] cpufreq: 8 .volidx = 8 .freq = 1100000
[ 2.246473] cpufreq: 9 .volidx = 10 .freq = 1200000
[ 2.246478] cpufreq: 10 .volidx = 12 .freq = 1300000
[ 2.246483] cpufreq: 11 .volidx = 13 .freq = 1400000
[ 2.246490] cpufreq: volt_table: voltage-table:
[ 2.246496] cpufreq: 0 .vdd_min = 800000 .vdd_max = 800000
[ 2.246501] cpufreq: 1 .vdd_min = 812500 .vdd_max = 812500
[ 2.246506] cpufreq: 2 .vdd_min = 825000 .vdd_max = 825000
[ 2.246511] cpufreq: 3 .vdd_min = 850000 .vdd_max = 850000
[ 2.246515] cpufreq: 4 .vdd_min = 875000 .vdd_max = 875000
[ 2.246520] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000
[ 2.246525] cpufreq: 6 .vdd_min = 925000 .vdd_max = 925000
[ 2.246530] cpufreq: 7 .vdd_min = 950000 .vdd_max = 950000
[ 2.246535] cpufreq: 8 .vdd_min = 962500 .vdd_max = 962500
[ 2.246540] cpufreq: 9 .vdd_min = 975000 .vdd_max = 975000
[ 2.246545] cpufreq: 10 .vdd_min = 1012500 .vdd_max = 1012500
[ 2.246550] cpufreq: 11 .vdd_min = 1025000 .vdd_max = 1025000
[ 2.246555] cpufreq: 12 .vdd_min = 1062500 .vdd_max = 1062500
[ 2.246560] cpufreq: 13 .vdd_min = 1100000 .vdd_max = 1100000
[ 2.246566] cpufreq: volt_table: l2-voltage-table:
[ 2.246571] cpufreq: 0 .vdd_min = 900000 .vdd_max = 900000
[ 2.246576] cpufreq: 1 .vdd_min = 900000 .vdd_max = 900000
[ 2.246581] cpufreq: 2 .vdd_min = 900000 .vdd_max = 900000
[ 2.246586] cpufreq: 3 .vdd_min = 900000 .vdd_max = 900000
[ 2.246591] cpufreq: 4 .vdd_min = 900000 .vdd_max = 900000
[ 2.246596] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000
[ 2.246601] cpufreq: 6 .vdd_min = 900000 .vdd_max = 900000
[ 2.246606] cpufreq: 7 .vdd_min = 900000 .vdd_max = 900000
[ 2.246611] cpufreq: 8 .vdd_min = 900000 .vdd_max = 900000
[ 2.246616] cpufreq: 9 .vdd_min = 900000 .vdd_max = 900000
[ 2.246621] cpufreq: 10 .vdd_min = 950000 .vdd_max = 950000
[ 2.246626] cpufreq: 11 .vdd_min = 950000 .vdd_max = 950000
[ 2.246631] cpufreq: 12 .vdd_min = 1000000 .vdd_max = 1000000
[ 2.246636] cpufreq: 13 .vdd_min = 1000000 .vdd_max = 1000000
[ 2.247627] rtk-usb3phy 98013210.dwc3_drd_usb3phy: ########### 0x1f = 90001f10
[ 2.247635] rtk-usb3phy 98013210.dwc3_drd_usb3phy: Initialized RTK USB 3.0 PHY
[ 2.264497] EMMC : emmc of_node found
[ 2.264562] [rtkemmc_probe] get speed-step : 0
[ 2.264565] [rtkemmc_probe] no driving nf_s0 warning !!
[ 2.264567] [rtkemmc_probe] no driving nf_s2 warning !!
[ 2.264601] rtkemmc_set_pin_mux: EMMC_PFUNC_NF1 = 0x33333333
[ 2.264618] EMMC: set to 0x00000000, EMMC_CTYPE=00000000
[ 2.264622] EMMC: set_wrapper_div to 0x00002100
[ 2.264625] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.264833] EMMC: phase adjust - EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00af4388, PLL_EMMC4=00000007
[ 2.265055] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.265058] rtkemmc_dump_registers :
[ 2.265060] EMMC_muxpad0 = 0xaaaa5aa8
[ 2.265061] EMMC_muxpad1 = 0x55552555
[ 2.265063] EMMC_PFUNC_NF1 = 0x33333333
[ 2.265065] EMMC_PFUNC_CR = 0x22223322
[ 2.265067] EMMC_PDRIVE_NF1 = 0x33333333
[ 2.265068] EMMC_PDRIVE_NF2 = 0x33333333
[ 2.265070] EMMC_PDRIVE_NF3 = 0x33333333
[ 2.265072] EMMC_CTYPE = 0x00000000
[ 2.265074] EMMC_UHSREG = 0x00000001
[ 2.265075] EMMC_DDR_REG = 0x00000000
[ 2.265077] EMMC_CARD_THR_CTL = 0x02000001
[ 2.265079] EMMC_CLKDIV = 0x00000080
[ 2.265081] EMMC_CKGEN_CTL = 0x00002100
[ 2.265082] EMMC_DQS_CTLR1 = 0x00000000
[ 2.265084] EMMC_PAD_CTL = 0x00000000
[ 2.265372] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.265374] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.282400] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.282402] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.302186] mmc0: EMMC driver initialized
[ 2.302687] usbcore: registered new interface driver usbhid
[ 2.302689] usbhid: USB HID core driver
[ 2.302693] EMMC : ignore cmd:0x34 since we're still in emmc init stage
[ 2.302713] EMMC : ignore cmd:0x34 since we're still in emmc init stage
[ 2.302821] ashmem: initialized
[ 2.302920] device_boot_complete_init: boot complete init
[ 2.302923] boot_complete_proc_init: create proc
[ 2.302948] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.302950] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.304366] usbcore: registered new interface driver snd-usb-audio
[ 2.304705] Netfilter messages via NETLINK v0.30.
[ 2.304721] nfnl_acct: registering with nfnetlink.
[ 2.304757] nf_conntrack version 0.5.0 (5834 buckets, 23336 max)
[ 2.305395] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.305397] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.306403] EMMC : ignore cmd:0x08 since we're still in emmc init stage
[ 2.306419] rtkemmc_set_rspparam : cmd5 arg=0x00000000
[ 2.306421] EMMC : ignore cmd:0x05 since we're still in emmc init stage
[ 2.306435] rtkemmc_set_rspparam : cmd5 arg=0x00000000
[ 2.306437] EMMC : ignore cmd:0x05 since we're still in emmc init stage
[ 2.306449] rtkemmc_set_rspparam : cmd5 arg=0x00000000
[ 2.306451] EMMC : ignore cmd:0x05 since we're still in emmc init stage
[ 2.306464] rtkemmc_set_rspparam : cmd5 arg=0x00000000
[ 2.306466] EMMC : ignore cmd:0x05 since we're still in emmc init stage
[ 2.306480] EMMC : ignore cmd:0x37 since we're still in emmc init stage
[ 2.306493] EMMC : ignore cmd:0x37 since we're still in emmc init stage
[ 2.306506] EMMC : ignore cmd:0x37 since we're still in emmc init stage
[ 2.306519] EMMC : ignore cmd:0x37 since we're still in emmc init stage
[ 2.306751] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.306753] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.308512] ctnetlink v0.93: registering with nfnetlink.
[ 2.308640] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 2.309123] xt_time: kernel timezone is -0000
[ 2.309135] ip_set: protocol 6
[ 2.310154] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.310157] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.310378] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.310380] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.312814] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.312816] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.318306] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
[ 2.318308] EMMC, set_ip_div = cur_div(0x00000080), ignored.
[ 2.319004] rtkemmc_set_rspparam : cmd7 arg : 0x00010000
[ 2.319006] rtkemmc_set_rspparam : cmd7 with rsp
[ 2.321011] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.321110] arp_tables: (C) 2002 David S. Miller
[ 2.330250] Initializing XFRM netlink socket
[ 2.333368] card->mmc_avail_type = 0x00000003
[ 2.333373] mmc0: MAN_BKOPS_EN bit is not set
[ 2.334195] emmc card manid = 0x00000015
[ 2.334198] EMMC: set_wrapper_div to 0x00002100
[ 2.334420] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007
[ 2.334428] EMMC: set div to 0x01, EMMC_CLKDIV=00000001
[ 2.334649] card->mmc_avail_type = 0x00000003
[ 2.335940] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007
[ 2.335942] EMMC, set_ip_div = cur_div(0x00000001), ignored.
[ 2.336164] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007
[ 2.336166] EMMC, set_ip_div = cur_div(0x00000001), ignored.
[ 2.337454] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007
[ 2.337456] EMMC, set_ip_div = cur_div(0x00000001), ignored.
[ 2.337457] set bus width 8
[ 2.337462] EMMC: set to 0x00010000, EMMC_CTYPE=00010000
[ 2.337821] mmc0: new high speed MMC card at address 0001
[ 2.348849] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 2.352220] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[ 2.352326] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[ 2.352427] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
[ 2.353785] mmcblk0: p1 p2 p3 p4 < p5 p6 >
[ 2.353802] rescan_partitions: add_partition 1
[ 2.353808] add_partition partition name = mmcblk0p1
[ 2.353904] rescan_partitions: add_partition 2
[ 2.353908] add_partition partition name = mmcblk0p2
[ 2.353995] rescan_partitions: add_partition 3
[ 2.354000] add_partition partition name = mmcblk0p3
[ 2.354083] rescan_partitions: add_partition 4
[ 2.354087] add_partition partition name = mmcblk0p4
[ 2.354173] rescan_partitions: add_partition 5
[ 2.354178] add_partition partition name = mmcblk0p5
[ 2.354264] rescan_partitions: add_partition 6
[ 2.354269] add_partition partition name = mmcblk0p6
[ 2.354357] rescan_partitions: rescan device mmcblk0 partitions finish.
[ 2.374335] NET: Registered protocol family 10
[ 2.383686] mip6: Mobile IPv6
[ 2.383706] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.427035] NET: Registered protocol family 17
[ 2.427050] NET: Registered protocol family 15
[ 2.427077] Key type dns_resolver registered
[ 2.435020] Registered cp15_barrier emulation handler
[ 2.445263] Registered setend emulation handler
[ 2.446110] [mscpu wrappee irq 25, scpu_wrap_addr 0xffffff80007aa000
[ 2.446110] [m
[ 2.446144] [SCPU_WRAPPER] initialized
[ 2.446147] [SCPU_WRAPPER][scpu_wrapper_init] memory monitor 0x98013b00 - 0x98013c00
[ 2.447662] rtk-usb2phy 98028280.dwc3_drd_usb2phy: Init RTK USB 2.0 PHY
[ 2.447691] rtk-usb2phy 98028280.dwc3_drd_usb2phy: Initialized RTK USB 2.0 PHY
[ 2.456479] rtk-fan 9801bc00.rtk_fan: rtk_fan_probe Enter ..
[ 2.456557] rtk-fan 9801bc00.rtk_fan: rtk_fan_init: set Initial fan speed to 2
[ 2.456587] rtk-fan 9801bc00.rtk_fan: rtk_fan_probe Exit
[ 2.456731] rtc_rtd1295 9801b600.rtc: sec=0x31 , min=0x2d . day=0x0
[ 2.456738] rtc_rtd1295 9801b600.rtc: time read as 2014.01.01 02:45:49
[ 2.457022] rtc_rtd1295 9801b600.rtc: setting system clock to 2014-01-01 02:45:49 UTC (1388544349)
[ 2.463409] thermal cooling_device0: thermal-cpufreq-0 bind to TP0: 1 -> 6, ret = 0
[ 2.463424] thermal cooling_device0: thermal-cpufreq-0 bind to TP1: 7 -> 11, ret = 0
[ 2.463521] corectrl: token_owenr X -> cpufreq
[ 2.467487] ldo3: disabling
[ 2.467490] ldo2: disabling
[ 2.467493] dcdc6: disabling
[ 2.467495] dcdc5: disabling
[ 2.467498] dcdc3: disabling
[ 2.467500] dcdc2: disabling
[ 2.467503] dcdc1: disabling
[ 2.467547] ALSA device list:
[ 2.467549] #0: snd_alsa_rtk
[ 2.747726] dwc3 98020000.dwc3_drd: dwc3_host_init
[ 2.747887] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 2.748046] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
[ 2.748374] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[ 2.748409] xhci-hcd xhci-hcd.4.auto: irq 9, io mem 0x98020000
[ 2.748898] hub 1-0:1.0: USB hub found
[ 2.748919] hub 1-0:1.0: 1 port detected
[ 2.749121] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 2.749231] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[ 2.749279] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.749660] hub 2-0:1.0: USB hub found
[ 2.749677] hub 2-0:1.0: 1 port detected
[ 2.750209] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: ENTER dwc3_rtk_type_c_probe
[ 2.750260] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Warning rd_ctrl-gpio no found
[ 2.750279] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: dwc3_rtk_type_c_probe get type_c power-gpio (id=127) OK
[ 2.750287] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: dwc3_rtk_type_c_probe first to close type c power by gpio (id=127) OK
[ 2.750299] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Chip revision is A01
[ 2.750393] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: DWC3_DRD is not DRD mode, due to dwc3_mode=USB_DR_MODE_HOST
[ 2.750412] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Enter ..
[ 2.750416] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work for 98013200.rtk_dwc3_drd_type_c
[ 2.750424] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_schedule_work Exit ..
[ 2.750427] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: create_debug_files
[ 2.750465] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Exit dwc3_rtk_type_c_probe OK (take 0 ms)
[ 3.182196] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3
[ 3.182238] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 3.182246] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc sadm sds apst
[ 3.182258] ahci_rtk 9803f000.sata: port 0 is not capable of FBS
[ 3.182395] ahci_rtk 9803f000.sata: port 1 is not capable of FBS
[ 3.183131] scsi host0: ahci_rtk
[ 3.183383] scsi host1: ahci_rtk
[ 3.183533] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x100 irq 28
[ 3.183536] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x180 irq 28
[ 3.412180] [SATA] Start Link
[ 3.412186] [SATA] Start Link
[ 3.752186] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.762070] ata1.00: ATA-9: WDC WD80EFAX-68LHPN0, 83.H0A83, max UDMA/133
[ 3.762074] ata1.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.765430] ata1.00: configured for UDMA/133
[ 3.765683] scsi 0:0:0:0: Direct-Access ATA WDC WD80EFAX-68L 0A83 PQ: 0 ANSI: 5
[ 3.766149] sd 0:0:0:0: [sataa] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB)
[ 3.766153] sd 0:0:0:0: [sataa] 4096-byte physical blocks
[ 3.766290] sd 0:0:0:0: [sataa] Write Protect is off
[ 3.766353] sd 0:0:0:0: [sataa] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.806725] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 3.806728] GPT:1953525167 != 15628053167
[ 3.806730] GPT:Alternate GPT header not at the end of the disk.
[ 3.806732] GPT:1953525167 != 15628053167
[ 3.806733] GPT: Use GNU Parted to correct GPT errors.
[ 3.806744] sataa:
[ 3.806765] rescan_partitions: rescan device sataa partitions finish.
[ 3.807207] sd 0:0:0:0: [sataa] Attached SCSI disk
[ 4.194246] ttyS0 - failed to request DMA
[ 4.752188] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013200.rtk_dwc3_drd
[ 4.762718] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe_work End ... ok! (take 2530 ms)
[ 4.771185] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe_work Start ...
[ 4.778704] dwc3 981f0000.dwc3_u3host: rtk dwc3 fixed dwc3 globals register start address 0xffffff80047c8100
[ 4.788987] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: Init RTK USB 3.0 PHY
[ 4.798044] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: ############ to toggle 0x09 BIT(9)
[ 4.811461] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: ########### 0x1f = 90001f10
[ 4.819131] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: Initialized RTK USB 3.0 PHY
[ 5.026815] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: Init RTK USB 2.0 PHY
[ 5.033888] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: Initialized RTK USB 2.0 PHY
[ 5.341579] dwc3 981f0000.dwc3_u3host: dwc3_host_init
[ 5.346875] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 5.352646] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[ 5.360714] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
[ 5.369644] xhci-hcd xhci-hcd.5.auto: irq 9, io mem 0x981f0000
[ 5.376079] hub 3-0:1.0: USB hub found
[ 5.379938] hub 3-0:1.0: 1 port detected
[ 5.384156] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 5.389883] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[ 5.397778] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.406458] hub 4-0:1.0: USB hub found
[ 5.410314] hub 4-0:1.0: 1 port detected
[ 7.422182] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013e00.rtk_dwc3_u3host
[ 7.433012] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_u3host_gpio_power_on_off [Workaround] to set QA board u2host power on gpio (id=19) OK
[ 7.447619] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe_work End ... ok! (take 2680 ms)
[ 7.456358] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: dwc3_rtk_type_c_probe_work Start ...
[ 7.465185] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: dwc3_rtk_type_c_init set debounce = 0x7f (check--> 0xff)
[ 7.475789] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: switch_dwc3_mode dr_mode=USB_DR_MODE_HOST
[ 7.485059] dwc3 98020000.dwc3_drd: dwc3_drd_to_host START....
[ 7.491033] dwc3 98020000.dwc3_drd: dwc3_drd_to_host Now is host
[ 7.507192] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: DWC3_DRD run in USB_DR_MODE_HOST
[ 7.816684] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: dwc3_rtk_type_c_probe_work End ... ok! (take 360 ms)
[ 7.826934] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: host_device_switch: usb cable connection change
[ 7.836742] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: switch_dwc3_mode dr_mode=USB_DR_MODE_HOST
[ 7.846011] dwc3 98020000.dwc3_drd: dwc3_drd_to_host START....
[ 7.851985] dwc3 98020000.dwc3_drd: dwc3_drd_to_host Now is host
[ 7.868144] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: device_attached to enable power
[ 7.876529] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN host mode to attach device at cc1 (cc_status=0x3b)
[ 8.942255] xhci-hcd xhci-hcd.4.auto: port_event call RTK_usb2_phy_toggle
[ 8.949212] rtk-usb2phy 98028280.dwc3_drd_usb2phy: ############ to toggle Page1 addr 0xe0 BIT(2)
[ 9.072186] usb 1-1: new high-speed USB device number 2 using xhci-hcd (98020000.dwc3_drd)
[ 9.236182] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 9.242601] scsi host2: usb-storage 1-1:1.0
[ 9.247504] usb 1-1: bInterfaceClass = 8
[ 9.352185] usb 1-1: hub_port_connect unbind-probe dev_name = 1-1 jiffies= 0x395
[ 13.242182] ata2: softreset failed (device not ready)
[ 13.472179] [SATA] Start Link
[ 19.387170] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 19.393571] scsi host3: usb-storage 1-1:1.0
[ 20.092189] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 20.098993] ata2.00: ATA-9: WDC WD80EFAX-68LHPN0, 83.H0A83, max UDMA/133
[ 20.105866] ata2.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 20.393094] scsi 3:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 20.403295] sd 3:0:0:0: [sdb] 1843200 512-byte logical blocks: (943 MB/900 MiB)
[ 20.411528] sd 3:0:0:0: [sdb] Write Protect is off
[ 20.417398] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.429779] sdb:
[ 20.431774] rescan_partitions: rescan device sdb partitions finish.
[ 20.440144] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 20.472185] pctrl-rtk: do_pcm_work: begin
[ 20.476353] pctrl-rtk: pctrl_l4_icg_jpeg::ENABLE_HW_PM, ret = -22
[ 20.487632] pctrl-rtk: pctrl_l4_icg_vo::ENABLE_HW_PM, ret = -22
[ 20.503740] pctrl-rtk: pctrl_l4_icg_mipi::ENABLE_HW_PM, ret = -22
[ 20.515040] pctrl-rtk: pctrl_mipi_aphy::POWER_OFF, ret = 0
[ 20.525783] pctrl-rtk: pctrl_cbus::POWER_OFF, ret = 0
[ 20.535958] pctrl-rtk: pctrl_l4_icg_scpu_wrapper::ENABLE_HW_PM, ret = 0
[ 20.538718] ata2.00: configured for UDMA/133
[ 20.538887] scsi 1:0:0:0: Direct-Access ATA WDC WD80EFAX-68L 0A83 PQ: 0 ANSI: 5
[ 20.539300] sd 1:0:0:0: [satac] 15628053168 512-byte logical blocks: (8.00 TB/7.27 TiB)
[ 20.539304] sd 1:0:0:0: [satac] 4096-byte physical blocks
[ 20.539467] sd 1:0:0:0: [satac] Write Protect is off
[ 20.539528] sd 1:0:0:0: [satac] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.588659] pctrl-rtk: pctrl_l4_icg_sb2::ENABLE_HW_PM, ret = 0
[ 20.609690] pctrl-rtk: pctrl_l4_icg_rsa::ENABLE_HW_PM, ret = 0
[ 20.625785] pctrl-rtk: pctrl_l4_icg_cp::ENABLE_HW_PM, ret = 0
[ 20.636689] pctrl-rtk: pctrl_l4_icg_nand::ENABLE_HW_PM, ret = -22
[ 20.662977] pctrl-rtk: pctrl_l4_icg_gspi::ENABLE_HW_PM, ret = -22
[ 20.674239] pctrl-rtk: pctrl_l4_icg_emmc::ENABLE_HW_PM, ret = 0
[ 20.685418] pctrl-rtk: pctrl_nat::POWER_OFF, ret = 0
[ 20.695525] pctrl-rtk: pctrl_l4_icg_nat_wrap::ENABLE_HW_PM, ret = -22
[ 20.717180] pctrl-rtk: do_pcm_work: done
[ 21.014662] satac: satac1 satac2
[ 21.018070] rescan_partitions: add_partition 1
[ 21.022731] add_partition partition name = satacp1
[ 21.027822] rescan_partitions: add_partition 2
[ 21.032475] add_partition partition name = satacp2
[ 21.037564] rescan_partitions: rescan device satac partitions finish.
[ 21.044609] sd 1:0:0:0: [satac] Attached SCSI disk
[ 21.049750] Freeing unused kernel memory: 616K (ffffffc000cc9000 - ffffffc000d63000)
[ 21.057722] Freeing alternatives memory: 56K (ffffffc000d63000 - ffffffc000d71000)
[ 21.342760] r8169 98016000.gmac eth0: write phy reg 1f value 0!
[ 21.348914] r8169 98016000.gmac eth0: read phy reg 0 value 1040!
[ 21.355194] r8169 98016000.gmac eth0: write phy reg 0 value 1840!
[ 21.364789] r8169 98016000.gmac eth0: write phy reg 1f value a43!
[ 21.371117] r8169 98016000.gmac eth0: read phy reg 18 value 2198!
[ 21.377465] r8169 98016000.gmac eth0: write phy reg 18 value 219c!
[ 21.383887] r8169 98016000.gmac eth0: write phy reg 1f value a43!
[ 21.390215] r8169 98016000.gmac eth0: read phy reg 19 value 40!
[ 21.396401] r8169 98016000.gmac eth0: write phy reg 19 value 50!
[ 21.402646] r8169 98016000.gmac eth0: read phy reg 0 value 1840!
[ 21.408874] r8169 98016000.gmac eth0: write phy reg 0 value 9840!
[ 21.432241] r8169 98016000.gmac eth0: read phy reg 0 value 1040!
[ 21.438470] r8169 98016000.gmac eth0: write phy reg 1f value 0!
[ 21.444627] r8169 98016000.gmac eth0: write phy reg 4 value de1!
[ 21.450854] r8169 98016000.gmac eth0: write phy reg 9 value 300!
[ 21.457097] r8169 98016000.gmac eth0: write phy reg 0 value 1200!
[ 21.463506] r8169 98016000.gmac eth0: write phy reg 1f value 0!
[ 21.469644] r8169 98016000.gmac eth0: write phy reg 0 value 1000!
[ 21.477615] r8169 98016000.gmac eth0: link down
[ 21.477636] r8169 98016000.gmac eth0: link down
[ 21.486970] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Adapter index 2
MAC 00:00:
udhcpc (v1.21.1) started
Executing /etc/udhcpc.script deconfig
Setting IP address 0.0.0.0 on eth0
Entering listen mode: raw
Opening raw socket on ifindex 2
Got raw socket fd
Attached filter to raw socket fd
Created raw socket
Adapter index 2
MAC 00:00:
Sending discover...
Waiting on select 3 seconds
[ 23.983310] r8169 98016000.gmac eth0: link up
[ 23.987805] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.014199] r8169 98016000.gmac eth0: link up
Adapter index 2
MAC 00:00:c0
Sending discover...
Waiting on select 3 seconds
Adapter index 2
MAC 00:00:
Sending discover...
Waiting on select 3 seconds
Received a packet
Adapter index 2
MAC 00:00:
Sending select for 192.168.0.30...
Waiting on select 3 seconds
Received a packet
Lease of 192.168.0.30 obtained, lease time 604800
Executing /etc/udhcpc.script bound
Setting IP address 192.168.0.30 on eth0
Deleting routers
route: SIOCDELRT: No such process
Adding router 192.168.0.1
Recreating /etc/resolv.conf
Adding DNS server 192.168.0.1
Adding DNS server 192.168.0.1
Entering listen mode: none