serial.log

2020-07-03 12:18:05,517 - Connecting to: /dev/ttyACM0
2020-07-03 12:18:05,532 - Changing monitoring state from "Offline" to "Opening serial port"
2020-07-03 12:18:05,540 - Connected to: Serial<id=0x6eaa5c10, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-07-03 12:18:05,541 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-07-03 12:18:05,915 - Send: N0 M110 N0*125
2020-07-03 12:18:05,934 - Recv: Command not found!
2020-07-03 12:18:18,034 - Recv: start
2020-07-03 12:18:18,041 - Send: N0 M110 N0*125
2020-07-03 12:18:18,051 - Recv: echo: 3.9.0-3421
2020-07-03 12:18:18,055 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-03 12:18:18,056 - Recv: Compiled: May 18 2020
2020-07-03 12:18:18,067 - Recv: echo: Free Memory: 1675 PlannerBufferBytes: 1792
2020-07-03 12:18:18,068 - Recv: echo:Hardcoded Default Settings Loaded
2020-07-03 12:18:18,070 - Recv: adc_init
2020-07-03 12:18:18,412 - Recv: CrashDetect ENABLED!
2020-07-03 12:18:19,560 - Recv: FSensor DISABLED (sensor board revision: 0.3 or older)
2020-07-03 12:18:19,689 - Recv: Sending 0xFF
2020-07-03 12:18:19,752 - Recv: echo:SD card ok
2020-07-03 12:19:15,727 - Recv: Error:No Line Number with checksum, Last Line: 0
2020-07-03 12:19:15,732 - Send: N0 M110 N0*125
2020-07-03 12:19:15,733 - Recv: Resend: 1
2020-07-03 12:19:15,740 - Recv: ok
2020-07-03 12:19:15,745 - Changing monitoring state from "Connecting" to "Operational"
2020-07-03 12:19:15,768 - Send: N0 M110 N0*125
2020-07-03 12:19:15,783 - Recv: ok
2020-07-03 12:19:15,786 - Send: N1 M115*39
2020-07-03 12:19:15,787 - Recv: ok
2020-07-03 12:19:15,791 - Send: N2 M20*19
2020-07-03 12:19:15,897 - Recv: FIRMWARE_NAME:Prusa-Firmware 3.9.0 based on Marlin FIRMWARE_URL:https://github.com/prusa3d/Prusa-Firmware PROTOCOL_VERSION:1.0 MACHINE_TYPE:Prusa i3 MK3S EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2020-07-03 12:19:16,233 - Recv: ok
2020-07-03 12:19:16,244 - Recv: Begin file list
2020-07-03 12:19:16,246 - Recv: MK3S_P~1.GCO 409041
2020-07-03 12:19:16,250 - Recv: MK4DCB~1.GCO 796054
2020-07-03 12:19:16,254 - Recv: MK9CB5~1.GCO 7550751
2020-07-03 12:19:16,260 - Recv: MKC12B~1.GCO 18235410
2020-07-03 12:19:16,264 - Recv: MK3S_P~2.GCO 4042561
2020-07-03 12:19:16,267 - Recv: MK3S_P~3.GCO 10370557
2020-07-03 12:19:16,271 - Recv: MK3S_P~4.GCO 1169490
2020-07-03 12:19:16,275 - Recv: MK4FC8~1.GCO 320939
2020-07-03 12:19:16,278 - Recv: MKDAC1~1.GCO 19928963
2020-07-03 12:19:16,281 - Recv: MK8853~1.GCO 7839966
2020-07-03 12:19:16,284 - Recv: MK9041~1.GCO 25035842
2020-07-03 12:19:16,288 - Recv: MK83D6~1.GCO 6136347
2020-07-03 12:19:16,370 - Recv: MK5EE4~1.GCO 239362
2020-07-03 12:19:16,411 - Recv: MK9EAA~1.GCO 23835763
2020-07-03 12:19:16,440 - Recv: MKC061~1.GCO 2313309
2020-07-03 12:19:16,449 - Recv: MK4F32~1.GCO 6726536
2020-07-03 12:19:16,456 - Recv: 3DBENC~1.GCO 3799121
2020-07-03 12:19:16,459 - Recv: End file list
2020-07-03 12:19:16,461 - Recv: ok
2020-07-03 12:19:18,769 - Send: M117 0% L=-/-
2020-07-03 12:19:18,777 - Recv: ok
2020-07-03 12:19:20,748 - Send: M105
2020-07-03 12:19:20,758 - Recv: ok T:61.5 /0.0 B:29.8 /0.0 T0:61.5 /0.0 @:0 B@:0 P:26.8 A:31.3
2020-07-03 12:19:25,965 - Send: M105
2020-07-03 12:19:25,986 - Recv: ok T:61.1 /0.0 B:29.6 /0.0 T0:61.1 /0.0 @:0 B@:0 P:25.9 A:31.2
2020-07-03 12:19:30,967 - Send: M105
2020-07-03 12:19:30,978 - Recv: ok T:60.6 /0.0 B:29.3 /0.0 T0:60.6 /0.0 @:0 B@:0 P:26.0 A:31.1
2020-07-03 12:19:35,973 - Send: M105
2020-07-03 12:19:35,995 - Recv: ok T:60.2 /0.0 B:29.3 /0.0 T0:60.2 /0.0 @:0 B@:0 P:26.0 A:31.3
2020-07-03 12:19:40,996 - Send: M105
2020-07-03 12:19:41,016 - Recv: ok T:59.7 /0.0 B:29.6 /0.0 T0:59.7 /0.0 @:0 B@:0 P:26.1 A:31.3
2020-07-03 12:19:42,236 - Changing monitoring state from "Operational" to "Starting"
2020-07-03 12:19:42,998 - Send: N3 M117 0% L=-/42*71
2020-07-03 12:19:43,025 - Recv: ok
2020-07-03 12:19:43,265 - Recv: MMU not responding - DISABLED
2020-07-03 12:19:46,040 - Send: N4 M105*35
2020-07-03 12:19:46,065 - Recv: ok T:59.2 /0.0 B:29.2 /0.0 T0:59.2 /0.0 @:0 B@:0 P:26.1 A:30.9
2020-07-03 12:19:51,044 - Send: N5 M105*34
2020-07-03 12:19:51,058 - Recv: ok T:58.7 /0.0 B:29.4 /0.0 T0:58.7 /0.0 @:0 B@:0 P:26.1 A:31.2
2020-07-03 12:19:56,968 - Send: N6 M105*33
2020-07-03 12:19:56,982 - Recv: ok T:58.0 /0.0 B:28.7 /0.0 T0:58.0 /0.0 @:0 B@:0 P:26.1 A:31.4
2020-07-03 12:20:01,524 - Send: N7 M117 0% L=-/549*125
2020-07-03 12:20:01,538 - Recv: ok
2020-07-03 12:20:01,609 - Send: N8 M114*47
2020-07-03 12:20:01,627 - Recv: X:0.00 Y:0.00 Z:0.15 E:0.00 Count X: 0.00 Y:0.00 Z:0.15 E:0.00
2020-07-03 12:20:01,630 - Recv: ok
2020-07-03 12:20:02,106 - Send: N9 M105*46
2020-07-03 12:20:02,117 - Recv: ok T:57.6 /0.0 B:29.1 /0.0 T0:57.6 /0.0 @:0 B@:0 P:26.0 A:31.4
2020-07-03 12:20:02,720 - Send: N0 M110 N0*125
2020-07-03 12:20:02,731 - Recv: ok
2020-07-03 12:20:02,762 - Changing monitoring state from "Starting" to "Printing"
2020-07-03 12:20:02,772 - Send: N1 M73 P0 R254*23
2020-07-03 12:20:02,786 - Recv: NORMAL MODE: Percent done: 0; print time remaining in mins: 254
2020-07-03 12:20:02,791 - Recv: SILENT MODE: Percent done: 255; print time remaining in mins: -1
2020-07-03 12:20:02,794 - Recv: ok
2020-07-03 12:20:02,799 - Send: N2 M73 Q0 S256*22
2020-07-03 12:20:02,826 - Recv: NORMAL MODE: Percent done: 0; print time remaining in mins: 254
2020-07-03 12:20:02,830 - Recv: SILENT MODE: Percent done: 0; print time remaining in mins: 256
2020-07-03 12:20:02,834 - Recv: ok
2020-07-03 12:20:02,840 - Send: N3 M201 X1000 Y1000 Z200 E5000*10
2020-07-03 12:20:02,847 - Recv: ok
2020-07-03 12:20:02,852 - Send: N4 M203 X200 Y200 Z12 E120*8
2020-07-03 12:20:02,859 - Recv: ok
2020-07-03 12:20:02,865 - Send: N5 M204 P1250 R1250 T1250*80
2020-07-03 12:20:02,871 - Recv: ok
2020-07-03 12:20:02,877 - Send: N6 M205 X8.00 Y8.00 Z0.40 E4.50*57
2020-07-03 12:20:02,884 - Recv: ok
2020-07-03 12:20:02,905 - Send: N7 M205 S0 T0*36
2020-07-03 12:20:02,912 - Recv: ok
2020-07-03 12:20:02,920 - Send: N8 M107*45
2020-07-03 12:20:02,925 - Recv: ok
2020-07-03 12:20:02,930 - Send: N9 M862.3 P "MK3S"*13
2020-07-03 12:20:02,937 - Recv: ok
2020-07-03 12:20:02,943 - Send: N10 M862.1 P0.4*91
2020-07-03 12:20:02,949 - Recv: ok
2020-07-03 12:20:02,954 - Send: N11 M115 U3.9.0*89
2020-07-03 12:20:02,962 - Recv: ok
2020-07-03 12:20:02,968 - Send: N12 G90*35
2020-07-03 12:20:02,973 - Recv: ok
2020-07-03 12:20:02,975 - Send: N13 M83*42
2020-07-03 12:20:02,982 - Recv: ok
2020-07-03 12:20:02,984 - Send: N14 M104 S430.000000*121
2020-07-03 12:20:02,991 - Recv: ok
2020-07-03 12:20:02,996 - Send: N15 M140 S60*103
2020-07-03 12:20:03,003 - Recv: ok
2020-07-03 12:20:03,008 - Send: N16 M190 S60*105
2020-07-03 12:20:04,015 - Recv: T:57.46 E:0 B:29.2
2020-07-03 12:20:05,018 - Recv: T:57.43 E:0 B:29.1
2020-07-03 12:20:06,022 - Recv: T:57.49 E:0 B:28.9
2020-07-03 12:20:07,021 - Recv: T:58.22 E:0 B:28.9
2020-07-03 12:20:08,025 - Recv: T:59.58 E:0 B:29.0
2020-07-03 12:20:09,028 - Recv: T:61.30 E:0 B:29.0
2020-07-03 12:20:10,028 - Recv: T:63.45 E:0 B:29.1
2020-07-03 12:20:11,031 - Recv: T:65.35 E:0 B:29.4
2020-07-03 12:20:12,040 - Recv: T:68.09 E:0 B:29.3
2020-07-03 12:20:13,034 - Recv: T:71.02 E:0 B:29.6
2020-07-03 12:20:14,039 - Recv: T:73.98 E:0 B:29.9
2020-07-03 12:20:15,041 - Recv: T:77.07 E:0 B:29.9
2020-07-03 12:20:16,046 - Recv: T:80.32 E:0 B:30.1
2020-07-03 12:20:17,045 - Recv: T:82.67 E:0 B:30.5
2020-07-03 12:20:18,049 - Recv: T:85.80 E:0 B:30.7
2020-07-03 12:20:19,052 - Recv: T:88.98 E:0 B:30.9
2020-07-03 12:20:20,055 - Recv: T:92.19 E:0 B:31.3
2020-07-03 12:20:21,055 - Recv: T:95.33 E:0 B:31.6
2020-07-03 12:20:22,059 - Recv: T:97.72 E:0 B:32.0
2020-07-03 12:20:23,062 - Recv: T:100.89 E:0 B:32.4
2020-07-03 12:20:24,062 - Recv: T:104.11 E:0 B:32.6
2020-07-03 12:20:25,066 - Recv: T:107.31 E:0 B:32.9
2020-07-03 12:20:26,069 - Recv: T:110.46 E:0 B:33.3
2020-07-03 12:20:27,069 - Recv: T:113.68 E:0 B:33.7
2020-07-03 12:20:28,072 - Recv: T:115.99 E:0 B:33.9
2020-07-03 12:20:29,071 - Recv: T:118.98 E:0 B:34.3
2020-07-03 12:20:30,075 - Recv: T:122.16 E:0 B:34.7
2020-07-03 12:20:31,078 - Recv: T:125.28 E:0 B:35.2
2020-07-03 12:20:32,079 - Recv: T:128.33 E:0 B:35.4
2020-07-03 12:20:33,081 - Recv: T:130.59 E:0 B:35.7
2020-07-03 12:20:34,086 - Recv: T:133.78 E:0 B:36.0
2020-07-03 12:20:35,085 - Recv: T:136.78 E:0 B:36.3
2020-07-03 12:20:36,097 - Recv: T:139.60 E:0 B:36.7
2020-07-03 12:20:37,100 - Recv: T:142.80 E:0 B:37.1
2020-07-03 12:20:38,103 - Recv: T:145.87 E:0 B:37.4
2020-07-03 12:20:39,108 - Recv: T:148.05 E:0 B:37.6
2020-07-03 12:20:40,107 - Recv: T:151.05 E:0 B:38.2
2020-07-03 12:20:41,111 - Recv: T:154.19 E:0 B:38.5
2020-07-03 12:20:42,114 - Recv: T:157.01 E:0 B:39.0
2020-07-03 12:20:43,126 - Recv: T:159.71 E:0 B:39.2
2020-07-03 12:20:44,117 - Recv: T:162.83 E:0 B:39.7
2020-07-03 12:20:45,118 - Recv: T:165.02 E:0 B:39.7
2020-07-03 12:20:46,121 - Recv: T:167.98 E:0 B:40.2
2020-07-03 12:20:47,124 - Recv: T:170.65 E:0 B:40.6
2020-07-03 12:20:48,124 - Recv: T:173.82 E:0 B:41.2
2020-07-03 12:20:49,127 - Recv: T:176.60 E:0 B:41.7
2020-07-03 12:20:50,131 - Recv: T:178.94 E:0 B:42.3
2020-07-03 12:20:51,130 - Recv: T:181.76 E:0 B:42.8
2020-07-03 12:20:52,133 - Recv: T:184.89 E:0 B:43.1
2020-07-03 12:20:53,134 - Recv: T:187.73 E:0 B:43.6
2020-07-03 12:20:54,136 - Recv: T:190.49 E:0 B:44.3
2020-07-03 12:20:55,141 - Recv: T:193.42 E:0 B:44.7
2020-07-03 12:20:56,140 - Recv: T:195.53 E:0 B:45.1
2020-07-03 12:20:57,144 - Recv: T:197.89 E:0 B:45.9
2020-07-03 12:20:58,147 - Recv: T:200.76 E:0 B:46.1
2020-07-03 12:20:59,146 - Recv: T:203.88 E:0 B:46.7
2020-07-03 12:21:00,150 - Recv: T:206.83 E:0 B:47.4
2020-07-03 12:21:01,149 - Recv: T:208.97 E:0 B:47.9
2020-07-03 12:21:02,153 - Recv: T:211.77 E:0 B:48.3
2020-07-03 12:21:03,194 - Recv: T:214.74 E:0 B:48.7
2020-07-03 12:21:04,197 - Recv: T:217.29 E:0 B:49.4
2020-07-03 12:21:05,201 - Recv: T:219.84 E:0 B:49.7
2020-07-03 12:21:06,200 - Recv: T:223.19 E:0 B:50.3
2020-07-03 12:21:07,204 - Recv: T:225.06 E:0 B:50.6
2020-07-03 12:21:08,207 - Recv: T:227.63 E:0 B:51.1
2020-07-03 12:21:09,211 - Recv: T:230.08 E:0 B:51.6
2020-07-03 12:21:10,210 - Recv: T:233.52 E:0 B:52.0
2020-07-03 12:21:11,214 - Recv: T:236.02 E:0 B:52.6
2020-07-03 12:21:12,217 - Recv: T:238.28 E:0 B:53.0
2020-07-03 12:21:13,217 - Recv: T:240.63 E:0 B:53.5
2020-07-03 12:21:14,221 - Recv: T:243.54 E:0 B:54.0
2020-07-03 12:21:15,224 - Recv: T:246.67 E:0 B:54.6
2020-07-03 12:21:16,224 - Recv: T:249.90 E:0 B:54.8
2020-07-03 12:21:17,227 - Recv: T:252.40 E:0 B:55.4
2020-07-03 12:21:18,226 - Recv: T:254.06 E:0 B:55.5
2020-07-03 12:21:19,230 - Recv: T:256.35 E:0 B:55.8
2020-07-03 12:21:20,234 - Recv: T:258.44 E:0 B:56.2
2020-07-03 12:21:21,233 - Recv: T:261.09 E:0 B:56.3
2020-07-03 12:21:22,236 - Recv: T:264.84 E:0 B:56.7
2020-07-03 12:21:23,240 - Recv: T:267.19 E:0 B:56.7
2020-07-03 12:21:24,240 - Recv: T:269.84 E:0 B:56.9
2020-07-03 12:21:25,267 - Recv: T:272.50 E:0 B:57.2
2020-07-03 12:21:26,268 - Recv: T:274.69 E:0 B:57.2
2020-07-03 12:21:27,271 - Recv: T:277.66 E:0 B:57.3
2020-07-03 12:21:28,275 - Recv: T:280.42 E:0 B:57.5
2020-07-03 12:21:29,274 - Recv: T:282.50 E:0 B:57.7
2020-07-03 12:21:30,277 - Recv: T:284.38 E:0 B:57.9
2020-07-03 12:21:31,278 - Recv: T:287.92 E:0 B:58.0
2020-07-03 12:21:32,281 - Recv: T:290.00 E:0 B:58.2
2020-07-03 12:21:33,285 - Recv: T:292.92 E:0 B:58.3
2020-07-03 12:21:34,284 - Recv: T:295.83 E:0 B:58.3
2020-07-03 12:21:35,288 - Recv: T:297.92 E:0 B:58.7
2020-07-03 12:21:36,291 - Recv: T:298.75 E:0 B:58.8
2020-07-03 12:21:36,635 - Recv: Error:0
2020-07-03 12:21:36,639 - Changing monitoring state from "Printing" to "Error: 0"
2020-07-03 12:21:36,660 - Send: M112
2020-07-03 12:21:36,673 - Send: N17 M112*23
2020-07-03 12:21:36,753 - Send: N18 M104 T0 S0*24
2020-07-03 12:21:36,787 - Send: N19 M140 S0*93
2020-07-03 12:21:36,799 - Changing monitoring state from "Error: 0" to "Offline (Error: 0)"
2020-07-03 12:21:36,808 - Connection closed, closing down monitor
2020-07-03 12:21:43,804 - Connecting to: /dev/ttyACM0
2020-07-03 12:21:43,823 - Changing monitoring state from "Offline" to "Opening serial port"
2020-07-03 12:21:43,828 - Connected to: Serial<id=0x63c94d10, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-07-03 12:21:43,830 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-07-03 12:21:43,857 - Send: N0 M110 N0*125
2020-07-03 12:21:44,865 - Recv: echo: 3.9.0-3421
2020-07-03 12:21:44,874 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-03 12:21:44,876 - Recv: Compiled: May 18 2020
2020-07-03 12:21:44,879 - Recv: echo: Free Memory: 1675 PlannerBufferBytes: 1792
2020-07-03 12:21:44,881 - Recv: echo:Hardcoded Default Settings Loaded
2020-07-03 12:21:44,883 - Recv: adc_init
2020-07-03 12:21:45,221 - Recv: CrashDetect ENABLED!
2020-07-03 12:21:46,318 - Recv: FSensor DISABLED (sensor board revision: 0.3 or older)
2020-07-03 12:21:46,508 - Recv: Sending 0xFF
2020-07-03 12:21:46,515 - Recv: echo:SD card ok
2020-07-03 12:21:46,553 - Recv: Error:0
2020-07-03 12:21:46,559 - Changing monitoring state from "Connecting" to "Error: 0"
2020-07-03 12:21:46,589 - Send: M112
2020-07-03 12:21:46,593 - Send: N1 M112*32
2020-07-03 12:21:46,600 - Send: N2 M104 T0 S0*35
2020-07-03 12:21:46,606 - Send: N3 M140 S0*102
2020-07-03 12:21:46,635 - Changing monitoring state from "Error: 0" to "Offline (Error: 0)"
2020-07-03 12:21:46,663 - Connection closed, closing down monitor
2020-07-03 12:21:52,824 - Connecting to: /dev/ttyACM0
2020-07-03 12:21:52,844 - Changing monitoring state from "Offline" to "Opening serial port"
2020-07-03 12:21:52,849 - Connected to: Serial<id=0x63c94370, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-07-03 12:21:52,850 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-07-03 12:21:52,885 - Send: N0 M110 N0*125
2020-07-03 12:21:53,885 - Recv: start
2020-07-03 12:21:53,914 - Send: N0 M110 N0*125
2020-07-03 12:21:53,921 - Recv: echo: 3.9.0-3421
2020-07-03 12:21:53,926 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-03 12:21:53,930 - Recv: Compiled: May 18 2020
2020-07-03 12:21:53,935 - Recv: echo: Free Memory: 1675 PlannerBufferBytes: 1792
2020-07-03 12:21:53,938 - Recv: echo:Hardcoded Default Settings Loaded
2020-07-03 12:21:53,940 - Recv: adc_init
2020-07-03 12:21:54,278 - Recv: CrashDetect ENABLED!
2020-07-03 12:21:55,376 - Recv: FSensor DISABLED (sensor board revision: 0.3 or older)
2020-07-03 12:21:55,565 - Recv: Sending 0xFF
2020-07-03 12:21:55,573 - Recv: echo:SD card ok
2020-07-03 12:21:55,609 - Recv: Error:0
2020-07-03 12:21:55,614 - Changing monitoring state from "Connecting" to "Error: 0"
2020-07-03 12:21:55,645 - Send: M112
2020-07-03 12:21:55,652 - Send: N1 M112*32
2020-07-03 12:21:55,663 - Send: N2 M104 T0 S0*35
2020-07-03 12:21:55,672 - Send: N3 M140 S0*102
2020-07-03 12:21:55,684 - Changing monitoring state from "Error: 0" to "Offline (Error: 0)"
2020-07-03 12:21:55,704 - Connection closed, closing down monitor
2020-07-03 12:22:06,989 - Connecting to: /dev/ttyACM0
2020-07-03 12:22:07,009 - Changing monitoring state from "Offline" to "Opening serial port"
2020-07-03 12:22:07,016 - Connected to: Serial<id=0x64f48c90, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-07-03 12:22:07,018 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-07-03 12:22:07,064 - Send: N0 M110 N0*125
2020-07-03 12:22:07,083 - Send: N0 M110 N0*125
2020-07-03 12:22:19,212 - Recv: start
2020-07-03 12:22:19,229 - Send: N0 M110 N0*125
2020-07-03 12:22:19,244 - Recv: echo: 3.9.0-3421
2020-07-03 12:22:19,250 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-03 12:22:19,255 - Recv: Compiled: May 18 2020
2020-07-03 12:22:19,259 - Recv: echo: Free Memory: 1675 PlannerBufferBytes: 1792
2020-07-03 12:22:19,263 - Recv: echo:Hardcoded Default Settings Loaded
2020-07-03 12:22:19,266 - Recv: adc_init
2020-07-03 12:22:19,592 - Recv: CrashDetect ENABLED!
2020-07-03 12:22:20,690 - Recv: FSensor DISABLED (sensor board revision: 0.3 or older)
2020-07-03 12:22:20,880 - Recv: Sending 0xFF
2020-07-03 12:22:20,887 - Recv: echo:SD card ok
2020-07-03 12:22:21,687 - Recv: Error:No Line Number with checksum, Last Line: 0
2020-07-03 12:22:21,691 - Recv: Resend: 1
2020-07-03 12:22:21,698 - Recv: ok
2020-07-03 12:22:21,704 - Changing monitoring state from "Connecting" to "Operational"
2020-07-03 12:22:21,746 - Send: N0 M110 N0*125
2020-07-03 12:22:21,801 - Recv: ok
2020-07-03 12:22:21,807 - Send: N1 M115*39
2020-07-03 12:22:21,836 - Recv: FIRMWARE_NAME:Prusa-Firmware 3.9.0 based on Marlin FIRMWARE_URL:https://github.com/prusa3d/Prusa-Firmware PROTOCOL_VERSION:1.0 MACHINE_TYPE:Prusa i3 MK3S EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2020-07-03 12:22:21,843 - Recv: ok
2020-07-03 12:22:21,910 - Send: M20
2020-07-03 12:22:21,964 - Recv: Begin file list
2020-07-03 12:22:22,016 - Recv: MK3S_P~1.GCO 409041
2020-07-03 12:22:22,162 - Recv: MK4DCB~1.GCO 796054
2020-07-03 12:22:22,166 - Recv: MK9CB5~1.GCO 7550751
2020-07-03 12:22:22,169 - Recv: MKC12B~1.GCO 18235410
2020-07-03 12:22:22,213 - Recv: MK3S_P~2.GCO 4042561
2020-07-03 12:22:22,244 - Recv: MK3S_P~3.GCO 10370557
2020-07-03 12:22:22,248 - Recv: MK3S_P~4.GCO 1169490
2020-07-03 12:22:22,255 - Recv: MK4FC8~1.GCO 320939
2020-07-03 12:22:22,259 - Recv: MKDAC1~1.GCO 19928963
2020-07-03 12:22:22,263 - Recv: MK8853~1.GCO 7839966
2020-07-03 12:22:22,266 - Recv: MK9041~1.GCO 25035842
2020-07-03 12:22:22,269 - Recv: MK83D6~1.GCO 6136347
2020-07-03 12:22:22,272 - Recv: MK5EE4~1.GCO 239362
2020-07-03 12:22:22,276 - Recv: MK9EAA~1.GCO 23835763
2020-07-03 12:22:22,287 - Recv: MKC061~1.GCO 2313309
2020-07-03 12:22:22,290 - Recv: MK4F32~1.GCO 6726536
2020-07-03 12:22:22,293 - Recv: 3DBENC~1.GCO 3799121
2020-07-03 12:22:22,296 - Recv: End file list
2020-07-03 12:22:22,298 - Recv: ok
2020-07-03 12:22:22,412 - Send: M115
2020-07-03 12:22:22,436 - Recv: FIRMWARE_NAME:Prusa-Firmware 3.9.0 based on Marlin FIRMWARE_URL:https://github.com/prusa3d/Prusa-Firmware PROTOCOL_VERSION:1.0 MACHINE_TYPE:Prusa i3 MK3S EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2020-07-03 12:22:22,438 - Recv: ok
2020-07-03 12:22:24,597 - Send: M117 0% L=-/-
2020-07-03 12:22:24,609 - Recv: ok
2020-07-03 12:22:26,036 - Changing monitoring state from "Operational" to "Starting"
2020-07-03 12:22:26,727 - Send: N2 M117 0% L=-/27*69
2020-07-03 12:22:26,738 - Recv: ok
2020-07-03 12:22:26,776 - Send: N3 M105*36
2020-07-03 12:22:26,801 - Recv: ok T:227.0 /0.0 B:58.8 /0.0 T0:227.0 /0.0 @:0 B@:0 P:32.0 A:32.7
2020-07-03 12:22:31,719 - Send: N4 M105*35
2020-07-03 12:22:31,731 - Recv: ok T:223.9 /0.0 B:58.3 /0.0 T0:223.9 /0.0 @:0 B@:0 P:31.3 A:32.6
2020-07-03 12:22:36,743 - Send: N5 M105*34
2020-07-03 12:22:36,762 - Recv: ok T:220.8 /0.0 B:58.0 /0.0 T0:220.8 /0.0 @:0 B@:0 P:31.3 A:33.0
2020-07-03 12:22:42,537 - Send: N6 M105*33
2020-07-03 12:22:42,559 - Recv: ok T:217.3 /0.0 B:57.6 /0.0 T0:217.3 /0.0 @:0 B@:0 P:31.4 A:32.7
2020-07-03 12:22:44,194 - Send: N7 M114*32
2020-07-03 12:22:44,261 - Recv: X:0.00 Y:0.00 Z:0.15 E:0.00 Count X: 0.00 Y:0.00 Z:0.15 E:0.00
2020-07-03 12:22:44,274 - Recv: ok
2020-07-03 12:22:45,692 - Send: N0 M110 N0*125
2020-07-03 12:22:45,708 - Recv: ok
2020-07-03 12:22:45,727 - Changing monitoring state from "Starting" to "Printing"
2020-07-03 12:22:45,771 - Send: N1 M73 P0 R254*23
2020-07-03 12:22:45,797 - Recv: NORMAL MODE: Percent done: 0; print time remaining in mins: 254
2020-07-03 12:22:45,798 - Recv: SILENT MODE: Percent done: 255; print time remaining in mins: -1
2020-07-03 12:22:45,812 - Recv: ok
2020-07-03 12:22:45,862 - Send: N2 M73 Q0 S256*22
2020-07-03 12:22:45,902 - Recv: NORMAL MODE: Percent done: 0; print time remaining in mins: 254
2020-07-03 12:22:45,918 - Recv: SILENT MODE: Percent done: 0; print time remaining in mins: 256
2020-07-03 12:22:45,941 - Recv: ok
2020-07-03 12:22:45,960 - Send: N3 M201 X1000 Y1000 Z200 E5000*10
2020-07-03 12:22:46,011 - Recv: ok
2020-07-03 12:22:46,068 - Send: N4 M203 X200 Y200 Z12 E120*8
2020-07-03 12:22:46,138 - Recv: ok
2020-07-03 12:22:46,175 - Send: N5 M204 P1250 R1250 T1250*80
2020-07-03 12:22:46,198 - Recv: ok
2020-07-03 12:22:46,258 - Send: N6 M205 X8.00 Y8.00 Z0.40 E4.50*57
2020-07-03 12:22:46,283 - Recv: ok
2020-07-03 12:22:46,299 - Send: N7 M205 S0 T0*36
2020-07-03 12:22:46,331 - Recv: ok
2020-07-03 12:22:46,411 - Send: N8 M107*45
2020-07-03 12:22:46,419 - Recv: ok
2020-07-03 12:22:46,435 - Send: N9 M862.3 P "MK3S"*13
2020-07-03 12:22:46,451 - Recv: ok
2020-07-03 12:22:46,458 - Send: N10 M117 0% L=-/549*75
2020-07-03 12:22:46,470 - Recv: ok
2020-07-03 12:22:46,474 - Send: N11 M862.1 P0.4*90
2020-07-03 12:22:46,486 - Recv: ok
2020-07-03 12:22:46,498 - Send: N12 M115 U3.9.0*90
2020-07-03 12:22:46,529 - Recv: ok
2020-07-03 12:22:46,536 - Send: N13 G90*34
2020-07-03 12:22:46,551 - Recv: ok
2020-07-03 12:22:46,561 - Send: N14 M83*45
2020-07-03 12:22:46,569 - Recv: ok
2020-07-03 12:22:46,576 - Send: N15 M104 S215*87
2020-07-03 12:22:46,589 - Recv: ok
2020-07-03 12:22:46,596 - Send: N16 M140 S60*100
2020-07-03 12:22:46,603 - Recv: ok
2020-07-03 12:22:46,608 - Send: N17 M190 S60*104
2020-07-03 12:22:47,619 - Recv: T:214.11 E:0 B:57.2
2020-07-03 12:22:48,619 - Recv: T:213.18 E:0 B:57.1
2020-07-03 12:22:49,258 - Recv: MMU not responding - DISABLED
2020-07-03 12:22:49,622 - Recv: T:212.45 E:0 B:57.0
2020-07-03 12:22:50,622 - Recv: T:211.82 E:0 B:56.9
2020-07-03 12:22:51,626 - Recv: T:211.25 E:0 B:56.9
2020-07-03 12:22:52,628 - Recv: T:211.20 E:0 B:57.1
2020-07-03 12:22:53,629 - Recv: T:210.94 E:0 B:57.0
2020-07-03 12:22:54,653 - Recv: T:210.89 E:0 B:57.0
2020-07-03 12:22:55,656 - Recv: T:210.99 E:0 B:57.1
2020-07-03 12:22:56,660 - Recv: T:211.35 E:0 B:57.3
2020-07-03 12:22:57,659 - Recv: T:212.03 E:0 B:57.4
2020-07-03 12:22:58,662 - Recv: T:212.24 E:0 B:57.3
2020-07-03 12:22:59,663 - Recv: T:213.02 E:0 B:57.5
2020-07-03 12:23:00,666 - Recv: T:213.54 E:0 B:57.6
2020-07-03 12:23:01,669 - Recv: T:214.22 E:0 B:58.0
2020-07-03 12:23:02,668 - Recv: T:214.38 E:0 B:58.1
2020-07-03 12:23:03,672 - Recv: T:214.48 E:0 B:58.2
2020-07-03 12:23:04,688 - Recv: T:214.69 E:0 B:58.5
2020-07-03 12:23:05,676 - Recv: T:214.58 E:0 B:58.7
2020-07-03 12:23:06,679 - Recv: T:214.74 E:0 B:58.9
2020-07-03 12:23:07,687 - Recv: T:214.74 E:0 B:59.2
2020-07-03 12:23:08,686 - Recv: T:214.38 E:0 B:59.4
2020-07-03 12:23:09,686 - Recv: T:214.01 E:0 B:59.5
2020-07-03 12:23:10,689 - Recv: T:213.65 E:0 B:59.8
2020-07-03 12:23:11,693 - Recv: T:213.28 E:0 B:59.9
2020-07-03 12:23:12,077 - Recv: ok
2020-07-03 12:23:12,093 - Send: N18 M109 S215*87
2020-07-03 12:23:13,102 - Recv: T:213.1 E:0 W:?
2020-07-03 12:23:14,105 - Recv: T:213.0 E:0 W:?
2020-07-03 12:23:15,149 - Recv: T:213.1 E:0 W:?
2020-07-03 12:23:16,122 - Recv: T:213.2 E:0 W:?
2020-07-03 12:23:17,167 - Recv: T:213.0 E:0 W:?
2020-07-03 12:23:18,115 - Recv: T:213.3 E:0 W:?
2020-07-03 12:23:19,114 - Recv: T:213.6 E:0 W:?
2020-07-03 12:23:20,139 - Recv: T:213.9 E:0 W:?
2020-07-03 12:23:21,139 - Recv: T:214.1 E:0 W:2
2020-07-03 12:23:22,143 - Recv: T:214.6 E:0 W:1
2020-07-03 12:23:23,146 - Recv: T:214.8 E:0 W:0
2020-07-03 12:23:23,234 - Recv: ok
2020-07-03 12:23:23,236 - Send: N19 G28 W*92
2020-07-03 12:23:23,275 - Recv: tmc2130_home_enter(axes_mask=0x04)
2020-07-03 12:23:23,726 - Recv: tmc2130_home_exit tmc2130_sg_homing_axes_mask=0x04
2020-07-03 12:23:23,728 - Recv: tmc2130_home_enter(axes_mask=0x01)
2020-07-03 12:23:24,580 - Recv: 0 step=62 mscnt= 992
2020-07-03 12:23:24,584 - Recv: tmc2130_goto_step 0 61 2 1000
2020-07-03 12:23:24,641 - Recv: tmc2130_home_exit tmc2130_sg_homing_axes_mask=0x01
2020-07-03 12:23:24,747 - Recv: tmc2130_home_enter(axes_mask=0x02)
2020-07-03 12:23:25,246 - Recv: echo:busy: processing
2020-07-03 12:23:25,248 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2020-07-03 12:23:27,344 - Recv: echo:busy: processing
2020-07-03 12:23:29,441 - Recv: echo:busy: processing
2020-07-03 12:23:29,769 - Recv: 0 step=34 mscnt= 544
2020-07-03 12:23:29,773 - Recv: tmc2130_goto_step 1 33 2 1000
2020-07-03 12:23:29,835 - Recv: tmc2130_home_exit tmc2130_sg_homing_axes_mask=0x02
2020-07-03 12:23:31,539 - Recv: echo:busy: processing
2020-07-03 12:23:33,620 - Recv: ok
2020-07-03 12:23:33,632 - Send: N20 G80*35