=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.01.03 14:48:07 =~=~=~=~=~=~=~=~=~=~=~=

U-Boot SPL 2014.04-10675-g44b53fd (May 23 2014 - 13:02:55)
Board: A10-OLinuXino-Lime
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600

U-Boot 2014.04-10675-g44b53fd (May 23 2014 - 13:02:55) Allwinner Technology

CPU: Allwinner A10 (SUN4I)
Board: A10-OLinuXino-Lime
I2C: ready
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0
In: serial
Out: serial
Err: serial
Net: emac
Hit any key to stop autoboot: 3 2 1 0
reading uEnv.txt
104 bytes read in 17 ms (5.9 KiB/s)
Loaded environment from uEnv.txt
reading boot.scr
337 bytes read in 16 ms (20.5 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
reading script.bin
54504 bytes read in 39 ms (1.3 MiB/s)
reading uImage
4447504 bytes read in 270 ms (15.7 MiB/s)
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.90+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4447440 Bytes = 4.2 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading script.bin
54504 bytes read in 39 ms (1.3 MiB/s)
reading uImage
4447504 bytes read in 270 ms (15.7 MiB/s)
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.90+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4447440 Bytes = 4.2 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<5>Linux version 3.4.90+ (root@debian) (gcc version 4.7.1 (Debian 4.7.1-7) ) #3 PREEMPT Tue Jun 10 09:17:04 EEST 2014
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Memory Reserved:
<6>SYS : 0x43000000 - 0x4300ffff ( 64 kB)
<6>VE : 0x44000000 - 0x48ffffff ( 80 MB)
<6>G2D : 0x49000000 - 0x49ffffff ( 16 MB)
<6>LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writeback
<6>sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
<7>On node 0 totalpages: 131072
<7>free_area_init_node: node 0, pgdat c085f108, node_mem_map d0000000
<7> DMA zone: 512 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 65024 pages, LIFO batch:15
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 65024 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 512MB = 512MB total
<5>Memory: 378220k/378220k available, 146068k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07cbe24 (7952 kB)
.init : 0xc07cc000 - 0xc07f7000 ( 172 kB)
.data : 0xc07f8000 - 0xc086a720 ( 458 kB)
.bss : 0xc086a744 - 0xc0a242a8 (1767 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:128
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>Setting up static identity map for 0x4055dc50 - 0x4055dca8
<6>devtmpfs: initialized
<6>dummy:
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>Init eGon pin module V2.0
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>Initialize DMAC OK
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource aw_64bits_counter
<5>FS-Cache: Loaded
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>CacheFiles: Loaded
[usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
[sw_hcd0]: usb host driver initialize........
[sw_hcd0]: open_usb_clock
[sw_hcd0]: host_init_state = 1
[sw_hcd0]: platform is usb host
[sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
wrn: hcd is not enable, need not start hcd
[sw_hcd0]: sw_usb_host0_disable start
-------sw_hcd0_soft_disconnect---------
is_on = 0, hcd0_set_vbus_cnt = 0
[sw_hcd_host0]: Set USB Power Off
wrn: hcd is not enable, need not stop hcd
[sw_hcd0]: close_usb_clock
[sw_hcd0]: sw_usb_host0_disable end
[sw_udc]: udc_init: version 20080411
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP: reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.359:1): initialized
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>NFS: Registering the id_resolver key type
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.18)
<6>msgmni has been set to 738
<3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>sunxi disp driver loaded (/dev/disp api 1.0)
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[uart]: used uart info.: 0x11
<6>[uart]: serial probe 0 irq 1 mapbase 0x01c28000
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.4.90+ (root@debian) (gcc version 4.7.1 (Debian 4.7.1-7) ) #3 PREEMPT Tue Jun 10 09:17:04 EEST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
[ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c085f108, node_mem_map d0000000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 378220k/378220k available, 146068k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07cbe24 (7952 kB)
[ 0.000000] .init : 0xc07cc000 - 0xc07f7000 ( 172 kB)
[ 0.000000] .data : 0xc07f8000 - 0xc086a720 ( 458 kB)
[ 0.000000] .bss : 0xc086a744 - 0xc0a242a8 (1767 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.006000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.050264] pid_max: default: 32768 minimum: 301
[ 0.053849] Mount-cache hash table entries: 512
[ 0.057677] Initializing cgroup subsys cpuacct
[ 0.061077] Initializing cgroup subsys devices
[ 0.064474] Initializing cgroup subsys freezer
[ 0.067716] Initializing cgroup subsys blkio
[ 0.071258] CPU: Testing write buffer coherency: ok
[ 0.078792] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.084337] Setting up static identity map for 0x4055dc50 - 0x4055dca8
[ 0.087163] devtmpfs: initialized
[ 0.089294] dummy:
[ 0.092809] NET: Registered protocol family 16
[ 0.099060] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104328] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.107771] Init eGon pin module V2.0
[ 0.113181] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.115243] Initialize DMAC OK
[ 0.122429] bio: create slab <bio-0> at 0
[ 0.125595] SCSI subsystem initialized
[ 0.128563] libata version 3.00 loaded.
[ 0.133144] usbcore: registered new interface driver usbfs
[ 0.137455] usbcore: registered new interface driver hub
[ 0.141567] usbcore: registered new device driver usb
[ 0.145210] Linux video capture interface: v2.00
[ 0.150708] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.153547] Bluetooth: Core ver 2.16
[ 0.156972] NET: Registered protocol family 31
[ 0.162295] Bluetooth: HCI device and connection manager initialized
[ 0.166126] Bluetooth: HCI socket layer initialized
[ 0.170138] Bluetooth: L2CAP socket layer initialized
[ 0.173978] Bluetooth: SCO socket layer initialized
[ 0.178571] Switching to clocksource aw_64bits_counter
[ 0.180522] FS-Cache: Loaded
[ 0.185911] cfg80211: Calling CRDA to update world regulatory domain
[ 0.188044] CacheFiles: Loaded
[ 0.194795] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
[ 0.198610] [sw_hcd0]: usb host driver initialize........
[ 0.202803] [sw_hcd0]: open_usb_clock
[ 0.226977] [sw_hcd0]: host_init_state = 1
[ 0.227945] [sw_hcd0]: platform is usb host
[ 0.230863] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[ 0.242044] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
[ 0.254578] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.261274] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[ 0.264449] hub 1-0:1.0: USB hub found
[ 0.267337] hub 1-0:1.0: 1 port detected
[ 0.271180] wrn: hcd is not enable, need not start hcd
[ 0.272424] [sw_hcd0]: sw_usb_host0_disable start
[ 0.278431] -------sw_hcd0_soft_disconnect---------
[ 0.281396] is_on = 0, hcd0_set_vbus_cnt = 0
[ 0.284444] [sw_hcd_host0]: Set USB Power Off
[ 0.288188] wrn: hcd is not enable, need not stop hcd
[ 0.289200] [sw_hcd0]: close_usb_clock
[ 0.291698] [sw_hcd0]: sw_usb_host0_disable end
[ 0.294863] [sw_udc]: udc_init: version 20080411
[ 0.301042] NET: Registered protocol family 2
[ 0.307139] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.313618] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.319335] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.324946] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.327131] TCP: reno registered
[ 0.331916] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.337158] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.340617] NET: Registered protocol family 1
[ 0.345749] RPC: Registered named UNIX socket transport module.
[ 0.349407] RPC: Registered udp transport module.
[ 0.353110] RPC: Registered tcp transport module.
[ 0.358500] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.363526] audit: initializing netlink socket (disabled)
[ 0.367216] type=2000 audit(0.359:1): initialized
[ 0.376613] VFS: Disk quotas dquot_6.5.2
[ 0.381955] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.387580] NFS: Registering the id_resolver key type
[ 0.391739] NTFS driver 2.1.30 [Flags: R/W].
[ 0.395093] fuse init (API version 7.18)
[ 0.398374] msgmni has been set to 738
[ 0.407977] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[ 0.411124] alg: No test for stdrng (krng)
[ 0.417766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.420649] io scheduler noop registered
[ 0.423943] io scheduler deadline registered
[ 0.427623] io scheduler cfq registered (default)
[ 0.432201] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.437699] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.441680] [uart]: used uart info.: 0x11
[ 0.446258] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
[ 0.472248] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
<6>console [ttyS0] enabled
[ 1.171767] console [ttyS0] enabled
<6>[uart]: serial probe 4 irq 17 mapbase 0x01c29000
[ 1.180024] [uart]: serial probe 4 irq 17 mapbase 0x01c29000
<6>sunxi-uart.4: ttyS1 at MMIO 0x1c29000 (irq = 17) is a U6_16550A
[ 1.211697] sunxi-uart.4: ttyS1 at MMIO 0x1c29000 (irq = 17) is a U6_16550A
<7>G2D: drv_g2d_init
[ 1.221004] G2D: drv_g2d_init
<6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[ 1.228660] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
<6>G2D: head:c9000000,tail:ca000000
[ 1.237642] G2D: head:c9000000,tail:ca000000
<6>G2D: Module initialized.major:251
[ 1.245245] G2D: Module initialized.major:251
<6>brd: module loaded
[ 1.252163] brd: module loaded
<6>loop: module loaded
[ 1.259353] loop: module loaded
[spi]: sw spi init !!
[ 1.264771] [spi]: sw spi init !!
[spi]: Found 1 spi devices in config files
[ 1.271918] [spi]: Found 1 spi devices in config files
[spi]: boards num modalias max_spd_hz bus_num cs mode
[ 1.283326] [spi]: boards num modalias max_spd_hz bus_num cs mode
[spi]: spi_board0 irq gpio not used
[ 1.294128] [spi]: spi_board0 irq gpio not used
[spi]: 0 spidev 10000000 2 0 0x3
[ 1.305092] [spi]: 0 spidev 10000000 2 0 0x3
[spi]: bus num = 2, spi used = 1
[ 1.315972] [spi]: bus num = 2, spi used = 1
[spi]: source = sdram_pll_p, src_clk = 480000000, mclk 96000000
[ 1.326154] [spi]: source = sdram_pll_p, src_clk = 480000000, mclk 96000000
<6>sun4i-spi sun4i-spi.2: master is unqueued, this is deprecated
[ 1.338973] sun4i-spi sun4i-spi.2: master is unqueued, this is deprecated
[spi]: allwinners SoC SPI Driver loaded for Bus SPI-2 with 2 Slaves attached
[ 1.352710] [spi]: allwinners SoC SPI Driver loaded for Bus SPI-2 with 2 Slaves attached
[spi]: [spi-2]: driver probe succeed, base f1c17000, irq 12, dma_id 2!
[ 1.367068] [spi]: [spi-2]: driver probe succeed, base f1c17000, irq 12, dma_id 2!
<6>sunxi_emac Using mii phy on PortA
[ 1.377985] sunxi_emac Using mii phy on PortA
<6>sunxi_emac Using MAC from SID: 02:0c:0c:42:24:fc[ 1.396918] sunxi_emac Using MAC from SID: 02:0c:0c:42:24:fc<6>PPP generic driver version 2.4.2

[ 1.407373] PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
[ 1.415632] PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
[ 1.424340] PPP Deflate Compression module registered
<6>PPP MPPE Compression module registered
[ 1.433927] PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
[ 1.442192] NET: Registered protocol family 24
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.452120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.463842] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[ 1.472303] [sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
[ 1.498275] [sw-ehci1]: Set USB Power ON
<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.508636] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 1.522128] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
[ 1.533536] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
<6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 1.562963] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found
[ 1.571499] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[ 1.578130] hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock
[ 1.584468] [sw-ohci1]: open clock
<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.613891] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 1.627038] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
[ 1.638371] sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
<6>hub 3-0:1.0: USB hub found
[ 1.705644] hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
[ 1.712300] hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock
[ 1.718599] [sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
[ 1.744571] [sw-ehci2]: Set USB Power ON
<6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.754914] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 1.768403] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
[ 1.779791] sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
<6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 1.802956] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
<6>hub 4-0:1.0: USB hub found
[ 1.811475] hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
[ 1.818097] hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock
[ 1.824425] [sw-ohci2]: open clock
<6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.853853] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[ 1.866999] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
[ 1.878332] sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
<6>hub 5-0:1.0: USB hub found
[ 1.945647] hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 1 port detected
[ 1.952291] hub 5-0:1.0: 1 port detected
<6>usbcore: registered new interface driver cdc_acm
[ 1.961138] usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.973760] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>Initializing USB Mass Storage driver...
[ 1.985583] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
[ 1.995537] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
[ 2.005115] USB Mass Storage support registered.
<6>usbcore: registered new interface driver ums-alauda
[ 2.014637] usbcore: registered new interface driver ums-alauda
<6>usbcore: registered new interface driver ums-cypress
[ 2.025544] usbcore: registered new interface driver ums-cypress
<6>usbcore: registered new interface driver ums-datafab
[ 2.036538] usbcore: registered new interface driver ums-datafab
<6>usbcore: registered new interface driver ums_eneub6250
[ 2.047713] usbcore: registered new interface driver ums_eneub6250
<6>usbcore: registered new interface driver ums-freecom
[ 2.058924] usbcore: registered new interface driver ums-freecom
<6>usbcore: registered new interface driver ums-isd200
[ 2.069835] usbcore: registered new interface driver ums-isd200
<6>usbcore: registered new interface driver ums-jumpshot
[ 2.080828] usbcore: registered new interface driver ums-jumpshot
<6>usbcore: registered new interface driver ums-karma
[ 2.091733] usbcore: registered new interface driver ums-karma
<6>usbcore: registered new interface driver ums-onetouch
[ 2.102640] usbcore: registered new interface driver ums-onetouch
<6>usbcore: registered new interface driver ums-realtek
[ 2.113732] usbcore: registered new interface driver ums-realtek
<6>usbcore: registered new interface driver ums-sddr09
[ 2.124639] usbcore: registered new interface driver ums-sddr09
<6>usbcore: registered new interface driver ums-sddr55
[ 2.135460] usbcore: registered new interface driver ums-sddr55
<6>usbcore: registered new interface driver ums-usbat
[ 2.146195] usbcore: registered new interface driver ums-usbat
<6>usbcore: registered new interface driver usbserial
[ 2.156907] usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver usbserial_generic
[ 2.168259] usbcore: registered new interface driver usbserial_generic
<6>USB Serial support registered for generic
[ 2.178821] USB Serial support registered for generic
<6>usbserial: USB Serial Driver core
[ 2.187191] usbserial: USB Serial Driver core
<6>usbcore: registered new interface driver ftdi_sio
[ 2.196285] usbcore: registered new interface driver ftdi_sio
<6>USB Serial support registered for FTDI USB Serial Device
[ 2.207362] USB Serial support registered for FTDI USB Serial Device
<6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 2.218640] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
<6>usbcore: registered new interface driver option
[ 2.229047] usbcore: registered new interface driver option
<6>USB Serial support registered for GSM modem (1-port)
[ 2.239607] USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver qcserial
[ 2.250556] usbcore: registered new interface driver qcserial
<6>USB Serial support registered for Qualcomm USB modem
[ 2.261284] USB Serial support registered for Qualcomm USB modem
<6>mousedev: PS/2 mouse device common for all mice
[ 2.271978] mousedev: PS/2 mouse device common for all mice
rtp_used == 1.
[ 2.279284] rtp_used == 1.
sun4i-ts: tp_press_threshold_enable is 0.
[ 2.285865] sun4i-ts: tp_press_threshold_enable is 0.
sun4i-ts: rtp_sensitive_level is 15.
[ 2.294232] sun4i-ts: rtp_sensitive_level is 15.
sun4i-ts: rtp_exchange_x_y_flag is 0.
[ 2.302249] sun4i-ts: rtp_exchange_x_y_flag is 0.
<6>input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
[ 2.312696] input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 2.324927] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>i2c /dev entries driver
[ 2.333511] i2c /dev entries driver
config i2c gpio with gpio_config api
[ 2.340567] config i2c gpio with gpio_config api
<6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[ 2.350695] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<6>I2C: i2c-0: AW16XX I2C adapter
[ 2.359549] I2C: i2c-0: AW16XX I2C adapter
config i2c gpio with gpio_config api
[ 2.367006] config i2c gpio with gpio_config api
<6>I2C: i2c-1: AW16XX I2C adapter
[ 2.374865] I2C: i2c-1: AW16XX I2C adapter
config i2c gpio with gpio_config api
[ 2.382310] config i2c gpio with gpio_config api
<6>I2C: i2c-2: AW16XX I2C adapter
[ 2.390150] I2C: i2c-2: AW16XX I2C adapter
<6>lirc_dev: IR Remote Control driver registered, major 250
[ 2.399740] lirc_dev: IR Remote Control driver registered, major 250
<6>IR NEC protocol handler initialized
[ 2.409668] IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
[ 2.417943] IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
[ 2.426218] IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
[ 2.434231] IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
[ 2.442331] IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
[ 2.451457] IR RC5 (streamzap) protocol handler initialized
<6>IR SANYO protocol handler initialized
[ 2.460684] IR SANYO protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
[ 2.470171] IR MCE Keyboard/mouse protocol handler initialized
<6>IR LIRC bridge handler initialized
[ 2.479399] IR LIRC bridge handler initialized
<6>usbcore: registered new interface driver uvcvideo
[ 2.488628] usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (1.1.1)
[ 2.497429] USB Video Class driver (1.1.1)
[ace_drv] start!!!
[ 2.503305] [ace_drv] start!!!
[ace_drv] init end!!!
[ 2.508600] [ace_drv] init end!!!
[pa_drv] start!!!
[ 2.513592] [pa_drv] start!!!
[pa_drv] init end!!!
[ 2.518665] [pa_drv] init end!!!
<6>axp20_ldo1: 1300 mV
[ 2.524193] axp20_ldo1: 1300 mV
<6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 2.532551] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 2.542677] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 2.552753] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 2.562908] axp20_buck2: 700 <--> 2275 mV at 1400 mV
<6>axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 2.573082] axp20_buck3: 700 <--> 3500 mV at 1250 mV
<6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 2.582944] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
[ 2.597616] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
<4>axp20_ldo2: Failed to create debugfs directory
[ 2.626527] axp20_ldo2: Failed to create debugfs directory
<6>Bluetooth: HCI UART driver ver 2.2
[ 2.635952] Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
[ 2.644155] Bluetooth: HCI H4 protocol initialized
<6>Bluetooth: HCI BCSP protocol initialized
[ 2.652864] Bluetooth: HCI BCSP protocol initialized
<6>Bluetooth: HCILL protocol initialized
[ 2.661471] Bluetooth: HCILL protocol initialized
<6>cpuidle: using governor ladder
[ 2.669227] cpuidle: using governor ladder
<6>cpuidle: using governor menu
[ 2.676203] cpuidle: using governor menu
<6>[mmc-msg] sw_mci_init
[ 2.682428] [mmc-msg] sw_mci_init
<6>[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[ 2.691465] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
<6>[mmc-msg] sdc0 set round clock 400000, src 24000000
[ 2.703294] [mmc-msg] sdc0 set round clock 400000, src 24000000
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.717412] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:e08f9000(4fc00000) ret 0.
[ 2.734637] [mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:e08f9000(4fc00000) ret 0.
<6>[mmc-msg] sdc3 set round clock 400000, src 24000000
[ 2.747759] [mmc-msg] sdc3 set round clock 400000, src 24000000
<6>[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.761804] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 Probe: base:0xf1c12000 irq:35 sg_cpu:e08fb000(4fc01000) ret 0.
[ 2.779008] [mmc-msg] sdc3 Probe: base:0xf1c12000 irq:35 sg_cpu:e08fb000(4fc01000) ret 0.
[mmc_pm]: no sdio card used in configuration
[ 2.791209] [mmc_pm]: no sdio card used in configuration
<6>usbcore: registered new interface driver usbhid
[ 2.801523] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[ 2.809900] usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
[ 2.817565] logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
[ 2.825875] logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
[ 2.834238] logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
[ 2.842597] logger: created 256K log 'log_system'
[I2S]sunxi-i2s cannot find any using configuration for controllers, return directly!
[ 2.856188] [I2S]sunxi-i2s cannot find any using configuration for controllers, return directly!
[I2S]sndi2s cannot find any using configuration for controllers, return directly!
[ 2.872332] [I2S]sndi2s cannot find any using configuration for controllers, return directly!
<6>IPv4 over IPv4 tunneling driver
[ 2.884240] IPv4 over IPv4 tunneling driver
<6>TCP: cubic registered
[ 2.891124] TCP: cubic registered
<6>Initializing XFRM netlink socket
[ 2.897653] Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
[ 2.905357] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[ 2.913230] NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
[ 2.921645] Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
[ 2.930682] Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
[ 2.938530] Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.946546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
[ 2.956035] Bluetooth: BNEP filters: protocol multicast
<6>8021q: 802.1Q VLAN Support v1.8
[ 2.964432] 8021q: 802.1Q VLAN Support v1.8
[mmc_pm]: No sdio card, please check your config !!
[ 2.973248] [mmc_pm]: No sdio card, please check your config !!
<5>Registering the dns_resolver key type
[ 2.982836] Registering the dns_resolver key type
<6>VFP support v0.3: [ 2.989477] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
implementor 41 architecture 3 part 30 variant c rev 3
<5>Registering SWP/SWPB emulation handler
[ 3.005703] Registering SWP/SWPB emulation handler
<4>axp20_buck2: Failed to create debugfs directory
[ 3.015046] axp20_buck2: Failed to create debugfs directory
<6>registered taskstats version 1
[ 3.024401] registered taskstats version 1
<6>I2C: i2c-3: HDMI I2C adapter
[ 3.122350] I2C: i2c-3: HDMI I2C adapter
<6>disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 3.155047] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
<6>[mmc-msg] mmc 0 detect change, present 1
[ 3.717457] [mmc-msg] mmc 0 detect change, present 1
<6>Console: switching to colour frame buffer device 160x45
[ 3.808907] Console: switching to colour frame buffer device 160x45
<4>axp20_buck3: incomplete constraints, leaving on
[ 3.863896] axp20_buck3: incomplete constraints, leaving on
<4>axp20_buck2: incomplete constraints, leaving on
[ 3.883327] axp20_buck2: incomplete constraints, leaving on
<4>axp20_ldo4: incomplete constraints, leaving on
[ 3.903238] axp20_ldo4: incomplete constraints, leaving on
<4>axp20_ldo3: incomplete constraints, leaving on
[ 3.923237] axp20_ldo3: incomplete constraints, leaving on
<4>axp20_ldo2: incomplete constraints, leaving on
[ 3.943237] axp20_ldo2: incomplete constraints, leaving on
<4>axp20_ldo1: incomplete constraints, leaving on
[ 3.963237] axp20_ldo1: incomplete constraints, leaving on
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
[ 3.981171] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
<6>ALSA device list:
[ 3.991724] ALSA device list:
<6> #0: sunxi-CODEC Audio Codec
[ 3.997730] #0: sunxi-CODEC Audio Codec
<6>Waiting for root device /dev/mmcblk0p2...
[ 4.006181] Waiting for root device /dev/mmcblk0p2...
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.226512] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 power on
[ 4.237961] [mmc-msg] sdc0 power on
[ccmu] set sdc0 reset status to 0 failed!
[ 4.245231] [ccmu] set sdc0 reset status to 0 failed!
<3>[mmc-err] Failed to release sdc0 reset
[ 4.254047] [mmc-err] Failed to release sdc0 reset
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.286917] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set round clock 400000, src 24000000
[ 4.301205] [mmc-msg] sdc0 set round clock 400000, src 24000000
<3>[mmc-err] smc 0 err, cmd 52, RTO
[ 4.384216] [mmc-err] smc 0 err, cmd 52, RTO
<3>[mmc-err] smc 0 err, cmd 52, RTO
[ 4.392731] [mmc-err] smc 0 err, cmd 52, RTO
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.405428] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.425533] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<3>[mmc-err] smc 0 err, cmd 5, RTO
[ 4.440272] [mmc-err] smc 0 err, cmd 5, RTO
<3>[mmc-err] smc 0 err, cmd 5, RTO
[ 4.448581] [mmc-err] smc 0 err, cmd 5, RTO
<3>[mmc-err] smc 0 err, cmd 5, RTO
[ 4.456907] [mmc-err] smc 0 err, cmd 5, RTO
<3>[mmc-err] smc 0 err, cmd 5, RTO
[ 4.465211] [mmc-err] smc 0 err, cmd 5, RTO
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.478465] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.496203] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.516288] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 4.560148] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 4.577906] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc0 set round clock 43636363, src 480000000
[ 4.592546] [mmc-msg] sdc0 set round clock 43636363, src 480000000
<6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 4.662241] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<6>mmc0: new high speed SDHC card at address 59b4
[ 4.676170] mmc0: new high speed SDHC card at address 59b4
<6>mmcblk0: mmc0:59b4 USD 7.38 GiB
[ 4.685391] mmcblk0: mmc0:59b4 USD 7.38 GiB
<6> mmcblk0: p1 p2
[ 4.693033] mmcblk0: p1 p2
<6>kjournald starting. Commit interval 5 seconds
[ 4.796820] kjournald starting. Commit interval 5 seconds
<6>EXT3-fs (mmcblk0p2): using internal journal
[ 4.841734] EXT3-fs (mmcblk0p2): using internal journal
<6>EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.852816] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
<6>VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 4.864682] VFS: Mounted root (ext3 filesystem) on device 179:2.
<6>devtmpfs: mounted
[ 4.874167] devtmpfs: mounted
<6>Freeing init memory: 172K
[ 4.879950] Freeing init memory: 172K
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd<30>udevd[169]: starting version 175
[ 5.736485] udevd[169]: starting version 175
udevd[169]: specified group 'videO' unknown

[ ok .
udevd[169]: specified group 'videO' unknown

[....] Synthesizing the initial hotplug events...[ ok done.
[....] Waiting for /dev to be fully populated...[ ok done.
Starting fake hwclock: loading system time.
Fri Jun 13 07:58:20 UTC 2014
[....] Activating swap...[ ok done.
[....] Checking root file system...fsck from util-linux 2.20.1
/dev/mmcblk0p2: clean, 53137/193920 files, 323689/786432 blocks
[ ok done.
<6>EXT3-fs (mmcblk0p2): using internal journal
[ 8.304979] EXT3-fs (mmcblk0p2): using internal journal
[....] Cleaning up temporary files... /tmp[ ok .
[info] Loading kernel module sw_ahci_platform.
<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 8.617776] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
<4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 8.637872] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 8.650781] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
<6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 8.665699] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
<6>scsi0 : sw_ahci_platform
[ 8.680670] scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
[ 8.694395] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
<6>ata1: SATA link down (SStatus 0 SControl 300)
[ 9.052946] ata1: SATA link down (SStatus 0 SControl 300)
[info] Loading kernel module lcd.
[info] Loading kernel module hdmi.
[info] Loading kernel module ump.
UMP<2>: [ 9.218455] UMP<2>: Inserting UMP device driver. Compiled: May 23 2014, time: 12:42:30
Inserting UMP device driver. Compiled: May 23 2014, time: 12:42:30
UMP<2>: [ 9.241960] UMP<2>: Using OS memory backend, allocation limit: 134217728
Using OS memory backend, allocation limit: 134217728
UMP: [ 9.253926] UMP: UMP device driver loaded
UMP device driver loaded
[info] Loading kernel module disp.
[info] Loading kernel module 8192cu.
ERR: script_parser_fetch usb_controller_type failed
[ 9.878855] ERR: script_parser_fetch usb_controller_type failed
<6>usbcore: registered new interface driver rtl8192cu
[ 9.891267] usbcore: registered new interface driver rtl8192cu
[info] Loading kernel module gpio-sunxi.
<6>sunxi_gpio driver init ver 1.3
[ 9.952054] sunxi_gpio driver init ver 1.3
<6>gpiochip_add: registered GPIOs 1 to 75 on device: A1X_GPIO
[ 9.972089] gpiochip_add: registered GPIOs 1 to 75 on device: A1X_GPIO
[info] Loading kernel module sunxi_cedar_mod.
[cedar dev]: install start!!!
[ 10.044110] [cedar dev]: install start!!!
[cedar dev]: install end!!!
[ 10.057203] [cedar dev]: install end!!!
[info] Loading kernel module leds-sunxi.
<6>sunxi_leds driver init
[ 10.130378] sunxi_leds driver init
<7>Registered led device: green:ph02:led1
[ 10.154837] Registered led device: green:ph02:led1
[info] Loading kernel module ledtrig-heartbeat.
[info] Loading kernel module nand.
[NAND] nand driver version: 0x2 0x9
[ 10.392890] [NAND] nand driver version: 0x2 0x9
[SCAN_ERR] search nand physical architecture parameter failed!
[ 10.403137] [SCAN_ERR] search nand physical architecture parameter failed!
[NAND]init_blklayer fail
[ 10.412515] [NAND]init_blklayer fail
ERROR: could not insert 'nand': Operation not permitted
[....] Activating lvm and md swap...[ ok done.
[....] Checking file systems...fsck from util-linux 2.20.1
[ ok done.
[....] Mounting local filesystems...[ ok done.
[....] Activating swapfile swap...[ ok done.
## Executing script at 44000000
reading script.bin
Error reading cluster[....] Cleaning up temporary files...[ ok .
[....] Setting kernel variables ...[ ok done.
[....] Configuring network interfaces...[ ok done.
[....] Cleaning up temporary files...[ ok .
[....] Setting up ALSA...[ ok done.
[