Jan 8 10:12:08 balcar-ml150 kernel: [202939.429833] sonixj 4-14.4.4:1.0: URB error -71, resubmitting
Jan 8 10:12:08 balcar-ml150 kernel: [321710.084284] sonixj 4-14.4.4:1.0: URB error -71, resubmittingsonixj 4-14.4.4:1.0: URB error -71, resubmitting
Jan 8 10:12:08 balcar-ml150 kernel: [321710.212234] sonixj 4-14.4.4:1.0: URB error -71, resubmitting<3>[321710.276529] hub 4-14.4:1.0: port 4 disabled by hub (EMI?), re-enabling...
Jan 8 10:12:08 balcar-ml150 kernel: [321710.276785] usb 4-14.4.4: USB disconnect, device number 12
Jan 8 10:12:08 balcar-ml150 kernel: [321710.494537] usb 4-14.4.4: new full-speed USB device number 13 using xhci_hcd
Jan 8 10:12:08 balcar-ml150 kernel: [321710.511662] usb 4-14.4.4: New USB device found, idVendor=0c45, idProduct=60c0
Jan 8 10:12:08 balcar-ml150 kernel: [321710.511669] usb 4-14.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 8 10:12:08 balcar-ml150 kernel: [321710.511672] usb 4-14.4.4: Product: USB camera
Jan 8 10:12:08 balcar-ml150 kernel: [321710.511813] usb 4-14.4.4: ep 0x83 - rounding interval to 512 microframes, ep desc says 800 microframes
Jan 8 10:12:08 balcar-ml150 kernel: [321710.512314] gspca_main: sonixj-2.14.0 probing 0c45:60c0
Jan 8 10:12:08 balcar-ml150 kernel: [321710.583183] input: sonixj as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.4/input/input8
Jan 8 16:32:54 balcar-ml150 kernel: [344547.342554] i2c i2c-1: sendbytes: NAK bailout.
Jan 8 16:32:54 balcar-ml150 kernel: [344547.461706] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 8 17:38:03 balcar-ml150 kernel: [348454.946838] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 8 17:38:03 balcar-ml150 kernel: [348454.947348] i2c i2c-1: sendbytes: NAK bailout.
Jan 8 18:39:08 balcar-ml150 kernel: [352118.479846] i2c i2c-1: sendbytes: NAK bailout.
Jan 8 18:39:08 balcar-ml150 kernel: [352118.542191] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 180
Jan 8 18:39:08 balcar-ml150 kernel: [352118.659639] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 8 20:05:11 balcar-ml150 kernel: [357280.303163] usb 4-13: new high-speed USB device number 14 using xhci_hcd
Jan 8 20:05:11 balcar-ml150 kernel: [357280.319759] usb 4-13: New USB device found, idVendor=03f0, idProduct=042a
Jan 8 20:05:11 balcar-ml150 kernel: [357280.319765] usb 4-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 8 20:05:11 balcar-ml150 kernel: [357280.319769] usb 4-13: Product: HP LaserJet Professional M1132 MFP
Jan 8 20:05:11 balcar-ml150 kernel: [357280.319772] usb 4-13: Manufacturer: Hewlett-Packard
Jan 8 20:05:11 balcar-ml150 kernel: [357280.319774] usb 4-13: SerialNumber: 000000000QH4HX8QSI1c
Jan 8 20:05:11 balcar-ml150 kernel: [357280.320496] usb-storage 4-13:1.0: USB Mass Storage device detected
Jan 8 20:05:11 balcar-ml150 kernel: [357280.320592] scsi9 : usb-storage 4-13:1.0
Jan 8 20:05:11 balcar-ml150 kernel: [357280.331827] WARNING! power/level is deprecated; use power/control instead
Jan 8 20:05:12 balcar-ml150 kernel: [357281.329847] usb 4-13: USB disconnect, device number 14
Jan 8 20:05:33 balcar-ml150 kernel: [357302.123038] scsi 9:0:0:0: Device offlined - not ready after error recovery
Jan 8 20:05:33 balcar-ml150 kernel: [357302.362852] usb 4-13: new high-speed USB device number 15 using xhci_hcd
Jan 8 20:05:34 balcar-ml150 kernel: [357302.379392] usb 4-13: New USB device found, idVendor=03f0, idProduct=042a
Jan 8 20:05:34 balcar-ml150 kernel: [357302.379398] usb 4-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 8 20:05:34 balcar-ml150 kernel: [357302.379402] usb 4-13: Product: HP LaserJet Professional M1132 MFP
Jan 8 20:05:34 balcar-ml150 kernel: [357302.379405] usb 4-13: Manufacturer: Hewlett-Packard
Jan 8 20:05:34 balcar-ml150 kernel: [357302.379407] usb 4-13: SerialNumber: 000000000QH4HX8QPR1a
Jan 8 20:05:36 balcar-ml150 kernel: [357304.502452] type=1400 audit(1483902336.123:80): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=12110 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
Jan 8 20:05:36 balcar-ml150 kernel: [357304.502468] type=1400 audit(1483902336.123:81): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=12110 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
Jan 8 20:05:36 balcar-ml150 kernel: [357304.502475] type=1400 audit(1483902336.123:82): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=12110 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
Jan 8 20:05:36 balcar-ml150 kernel: [357304.502481] type=1400 audit(1483902336.123:83): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=12110 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
Jan 8 20:05:36 balcar-ml150 kernel: [357304.502486] type=1400 audit(1483902336.123:84): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=12110 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
Jan 8 20:05:36 balcar-ml150 kernel: [357305.158614] usblp 4-13:1.0: usblp1: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x03F0 pid 0x042A
Jan 8 20:05:36 balcar-ml150 kernel: [357305.158645] usbcore: registered new interface driver usblp
Jan 8 20:32:04 balcar-ml150 kernel: [358892.706655] usblp1: removed
Jan 8 22:52:52 balcar-ml150 kernel: [367337.535881] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 08:00:21 balcar-ml150 kernel: [400174.085530] type=1400 audit(1483945221.861:85): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=16419 comm="apparmor_parser"
Jan 9 08:00:21 balcar-ml150 kernel: [400174.085543] type=1400 audit(1483945221.861:86): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=16419 comm="apparmor_parser"
Jan 9 08:00:21 balcar-ml150 kernel: [400174.086597] type=1400 audit(1483945221.861:87): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=16419 comm="apparmor_parser"
Jan 9 10:54:25 balcar-ml150 kernel: [410614.076459] usb 4-14.4.3.1: USB disconnect, device number 8
Jan 9 10:54:26 balcar-ml150 kernel: [410614.279901] usb 4-14.4.3.1: new high-speed USB device number 16 using xhci_hcd
Jan 9 10:54:26 balcar-ml150 kernel: [410614.298568] usb 4-14.4.3.1: New USB device found, idVendor=058f, idProduct=6362
Jan 9 10:54:26 balcar-ml150 kernel: [410614.298574] usb 4-14.4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 9 10:54:26 balcar-ml150 kernel: [410614.298578] usb 4-14.4.3.1: Product: Mass Storage Device
Jan 9 10:54:26 balcar-ml150 kernel: [410614.298581] usb 4-14.4.3.1: Manufacturer: Generic
Jan 9 10:54:26 balcar-ml150 kernel: [410614.298583] usb 4-14.4.3.1: SerialNumber: 058F312D81B
Jan 9 10:54:26 balcar-ml150 kernel: [410614.299345] usb-storage 4-14.4.3.1:1.0: USB Mass Storage device detected
Jan 9 10:54:26 balcar-ml150 kernel: [410614.299450] scsi10 : usb-storage 4-14.4.3.1:1.0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.296199] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.296700] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.297195] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.297672] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.297999] sd 10:0:0:0: Attached scsi generic sg5 type 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.298234] sd 10:0:0:1: Attached scsi generic sg6 type 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.298455] sd 10:0:0:2: Attached scsi generic sg7 type 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.298783] sd 10:0:0:3: Attached scsi generic sg8 type 0
Jan 9 10:54:27 balcar-ml150 kernel: [410615.303096] sd 10:0:0:0: [sdc] Attached SCSI removable disk
Jan 9 10:54:27 balcar-ml150 kernel: [410615.306516] sd 10:0:0:1: [sdd] Attached SCSI removable disk
Jan 9 10:54:27 balcar-ml150 kernel: [410615.307074] sd 10:0:0:2: [sde] Attached SCSI removable disk
Jan 9 10:54:27 balcar-ml150 kernel: [410615.307740] sd 10:0:0:3: [sdf] Attached SCSI removable disk
Jan 9 17:50:59 balcar-ml150 kernel: [435598.546679] i2c i2c-1: sendbytes: NAK bailout.
Jan 9 17:50:59 balcar-ml150 kernel: [435598.665586] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 17:50:59 balcar-ml150 kernel: [435598.666661] i2c i2c-1: sendbytes: NAK bailout.
Jan 9 19:27:46 balcar-ml150 kernel: [441403.158306] i2c i2c-1: sendbytes: NAK bailout.
Jan 9 19:27:46 balcar-ml150 kernel: [441403.277282] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 20:30:17 balcar-ml150 kernel: [445152.952230] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 21:54:31 balcar-ml150 kernel: [450205.134618] i2c i2c-1: sendbytes: NAK bailout.
Jan 9 21:54:31 balcar-ml150 kernel: [450205.192188] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 21:54:31 balcar-ml150 kernel: [450205.194520] i2c i2c-1: sendbytes: NAK bailout.
Jan 9 22:58:21 balcar-ml150 kernel: [454033.030134] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 9 22:58:21 balcar-ml150 kernel: [454033.030886] i2c i2c-1: sendbytes: NAK bailout.
Jan 10 02:49:57 balcar-ml150 kernel: [321710.276176] sonixj 4-14.4.4:1.0: URB error -71, resubmitting
Jan 10 02:49:57 balcar-ml150 kernel: [467923.863830] sonixj 4-14.4.4:1.0: URB error -71, resubmittingsonixj 4-14.4.4:1.0: URB error -71, resubmitting
Jan 10 02:49:57 balcar-ml150 kernel: [467923.991738] sonixj 4-14.4.4:1.0: URB error -71, resubmitting<3>[467923.992072] hub 4-14.4:1.0: port 4 disabled by hub (EMI?), re-enabling...
Jan 10 02:49:57 balcar-ml150 kernel: [467923.992326] usb 4-14.4.4: USB disconnect, device number 13
Jan 10 02:49:57 balcar-ml150 kernel: [467924.210005] usb 4-14.4.4: new full-speed USB device number 17 using xhci_hcd
Jan 10 02:49:57 balcar-ml150 kernel: [467924.227142] usb 4-14.4.4: New USB device found, idVendor=0c45, idProduct=60c0
Jan 10 02:49:57 balcar-ml150 kernel: [467924.227148] usb 4-14.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 10 02:49:57 balcar-ml150 kernel: [467924.227151] usb 4-14.4.4: Product: USB camera
Jan 10 02:49:57 balcar-ml150 kernel: [467924.227293] usb 4-14.4.4: ep 0x83 - rounding interval to 512 microframes, ep desc says 800 microframes
Jan 10 02:49:57 balcar-ml150 kernel: [467924.227808] gspca_main: sonixj-2.14.0 probing 0c45:60c0
Jan 10 02:49:57 balcar-ml150 kernel: [467924.298602] input: sonixj as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.4/input/input9
Jan 10 07:55:50 balcar-ml150 kernel: [486270.717094] type=1400 audit(1484031350.945:88): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=18766 comm="apparmor_parser"
Jan 10 07:55:50 balcar-ml150 kernel: [486270.717106] type=1400 audit(1484031350.945:89): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=18766 comm="apparmor_parser"
Jan 10 07:55:50 balcar-ml150 kernel: [486270.717734] type=1400 audit(1484031350.945:90): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=18766 comm="apparmor_parser"
Jan 10 18:32:06 balcar-ml150 kernel: [524431.934832] i2c i2c-1: sendbytes: NAK bailout.
Jan 10 18:32:06 balcar-ml150 kernel: [524431.992409] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 10 18:32:06 balcar-ml150 kernel: [524431.994835] i2c i2c-1: sendbytes: NAK bailout.
Jan 10 20:33:03 balcar-ml150 kernel: [531686.120374] perf samples too long (5668 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
Jan 10 20:55:20 balcar-ml150 kernel: [533022.292194] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 10 21:54:15 balcar-ml150 kernel: [536556.760704] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 10 22:34:27 balcar-ml150 kernel: [538967.310410] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 07:55:16 balcar-ml150 kernel: [572603.844967] type=1400 audit(1484117716.618:91): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=20957 comm="apparmor_parser"
Jan 11 07:55:16 balcar-ml150 kernel: [572603.844979] type=1400 audit(1484117716.618:92): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20957 comm="apparmor_parser"
Jan 11 07:55:16 balcar-ml150 kernel: [572603.845608] type=1400 audit(1484117716.618:93): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=20957 comm="apparmor_parser"
Jan 11 10:42:36 balcar-ml150 kernel: [582640.387549] usb 4-13: USB disconnect, device number 15
Jan 11 17:07:03 balcar-ml150 kernel: [605698.521568] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 17:07:03 balcar-ml150 kernel: [605698.524460] i2c i2c-1: sendbytes: NAK bailout.
Jan 11 18:08:13 balcar-ml150 kernel: [609366.988793] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 18:31:06 balcar-ml150 kernel: [610739.163904] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jan 11 18:31:06 balcar-ml150 kernel: [610739.172913] JFS: nTxBlock = 8192, nTxLock = 65536
Jan 11 18:31:06 balcar-ml150 kernel: [610739.186739] NTFS driver 2.1.30 [Flags: R/O MODULE].
Jan 11 18:31:06 balcar-ml150 kernel: [610739.208292] QNX4 filesystem 0.2.3 registered.
Jan 11 18:31:06 balcar-ml150 kernel: [610739.216714] xor: automatically using best checksumming function:
Jan 11 18:31:06 balcar-ml150 kernel: [610739.254451] avx : 17780.000 MB/sec
Jan 11 18:31:06 balcar-ml150 kernel: [610739.322413] raid6: sse2x1 7358 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.390410] raid6: sse2x2 9328 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.458362] raid6: sse2x4 10744 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.526358] raid6: avx2x1 14158 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.594330] raid6: avx2x2 16690 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.662283] raid6: avx2x4 19089 MB/s
Jan 11 18:31:06 balcar-ml150 kernel: [610739.662285] raid6: using algorithm avx2x4 (19089 MB/s)
Jan 11 18:31:06 balcar-ml150 kernel: [610739.662286] raid6: using avx2x2 recovery algorithm
Jan 11 18:31:06 balcar-ml150 kernel: [610739.676160] bio: create slab <bio-1> at 1
Jan 11 18:31:06 balcar-ml150 kernel: [610739.676479] Btrfs loaded
Jan 11 19:09:20 balcar-ml150 kernel: [613032.328708] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 19:29:16 balcar-ml150 kernel: [614228.065598] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 20:42:11 balcar-ml150 kernel: [618601.234896] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 21:44:34 balcar-ml150 kernel: [622343.068820] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 21:44:34 balcar-ml150 kernel: [622343.183917] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 22:47:37 balcar-ml150 kernel: [626124.754422] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 11 22:47:37 balcar-ml150 kernel: [626124.868751] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Jan 12 07:50:17 balcar-ml150 kernel: [658672.588746] type=1400 audit(1484203817.802:94): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6615 comm="apparmor_parser"
Jan 12 07:50:17 balcar-ml150 kernel: [658672.588756] type=1400 audit(1484203817.802:95): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6615 comm="apparmor_parser"
Jan 12 07:50:17 balcar-ml150 kernel: [658672.589337] type=1400 audit(1484203817.802:96): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6615 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Initializing cgroup subsys cpu
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Initializing cgroup subsys cpuacct
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Linux version 3.13.0-107-generic (buildd@lcy01-09) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #154-Ubuntu SMP Tue Dec 20 09:57:27 UTC 2016 (Ubuntu 3.13.0-107.154-generic 3.13.11-ckt39)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-107-generic.efi.signed root=UUID=be7b00a7-1c3e-4f3b-a909-a88cadd146c8 ro quiet splash vt.handoff=7
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] KERNEL supported cpus:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Intel GenuineIntel
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] AMD AuthenticAMD
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Centaur CentaurHauls
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000092fff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000093000-0x0000000000093fff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009ffff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006b9ecfff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000006b9ed000-0x000000006be6cfff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000006be6d000-0x000000006be6dfff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000006be6e000-0x000000006beeefff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000006beef000-0x00000000784fefff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000784ff000-0x00000000788fefff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000788ff000-0x00000000790fefff] type 20
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000790ff000-0x00000000791fefff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000791ff000-0x000000007b5fefff] ACPI NVS
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b7fefff] ACPI data
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x000000007b7ff000-0x000000007b7fffff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] NX (Execute Disable) protection: active
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: EFI v2.40 by HP
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: ACPI=0x7b7fe000 ACPI 2.0=0x7b7fe014 SMBIOS=0x788fb000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000093000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000093000-0x0000000000094000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000094000-0x00000000000a0000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001505000) (20MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000001505000-0x0000000002000000) (10MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003405000) (20MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000003405000-0x0000000022fb2000) (507MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000022fb2000-0x000000003ed00000) (445MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem08: type=4, attr=0xf, range=[0x000000003ed00000-0x000000003ed80000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x000000003ed80000-0x000000006b9ed000) (716MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x000000006b9ed000-0x000000006be6d000) (4MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000006be6d000-0x000000006be6e000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem12: type=6, attr=0x800000000000000f, range=[0x000000006be6e000-0x000000006beef000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000006beef000-0x000000006ecfc000) (46MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000006ecfc000-0x0000000071f0a000) (50MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000071f0a000-0x0000000072430000) (5MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000072430000-0x0000000072434000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000072434000-0x000000007245b000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x000000007245b000-0x000000007246f000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000007246f000-0x000000007247a000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007247a000-0x000000007247b000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000007247b000-0x0000000072481000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000072481000-0x0000000072483000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000072483000-0x000000007346a000) (15MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000007346a000-0x000000007346b000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007346b000-0x0000000076cff000) (56MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000076cff000-0x0000000076f29000) (2MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem27: type=2, attr=0xf, range=[0x0000000076f29000-0x00000000770ff000) (1MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000770ff000-0x00000000773d9000) (2MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem29: type=1, attr=0xf, range=[0x00000000773d9000-0x00000000774ff000) (1MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000774ff000-0x0000000077a98000) (5MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem31: type=2, attr=0xf, range=[0x0000000077a98000-0x0000000077aa2000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000077aa2000-0x00000000784ff000) (10MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem33: type=6, attr=0x800000000000000f, range=[0x00000000784ff000-0x00000000788ff000) (4MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem34: type=5, attr=0x800000000000000f, range=[0x00000000788ff000-0x00000000790ff000) (8MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem35: type=0, attr=0xf, range=[0x00000000790ff000-0x00000000791ff000) (1MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000791ff000-0x000000007b5ff000) (36MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem37: type=9, attr=0xf, range=[0x000000007b5ff000-0x000000007b7ff000) (2MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x000000007b7ff000-0x000000007b800000) (0MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] efi: mem40: type=11, attr=0x8000000000000000, range=[0x0000000080000000-0x0000000090000000) (256MB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SMBIOS 2.8 present.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMI: HP ProLiant ML150 Gen9, BIOS P95 12/24/2014
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] No AGP bridge found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] MTRR default type: write-back
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] MTRR fixed ranges enabled:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 00000-9FFFF write-back
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] A0000-BFFFF uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] C0000-DFFFF write-protect
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] E0000-FFFFF uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] MTRR variable ranges enabled:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 1 base 038000000000 mask 3FE000000000 uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 2 base 00007C000000 mask 3FFFFC000000 uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 3 base 00007FC00000 mask 3FFFFFC00000 uncachable
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 4 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 5 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 6 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 7 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 8 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] 9 disabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Scanning 1 areas for low memory corruption
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Using GB pages for direct mapping
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x47fe00000-0x47fffffff] page 1G
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x47c000000-0x47fdfffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x47c000000-0x47fdfffff] page 1G
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x400000000-0x47bffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x400000000-0x47bffffff] page 1G
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6b9ecfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x00200000-0x6b7fffff] page 2M
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x6b800000-0x6b9ecfff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x6be6d000-0x6be6dfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x6be6d000-0x6be6dfff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x6beef000-0x784fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x6beef000-0x6bffffff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x6c000000-0x783fffff] page 2M
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x78400000-0x784fefff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe7000, 0x02fe7fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x7b7ff000-0x7b7fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x7b7ff000-0x7b7fffff] page 4k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] BRK [0x02fe8000, 0x02fe8fff] PGTABLE
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] RAMDISK: [mem 0x35b2a000-0x36d8cfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: RSDP 000000007b7fe014 000024 (v02 HP )
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: XSDT 000000007b7e8188 0000F4 (v01 HP ProLiant 00000001 01000013)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: FACP 000000007b7f5000 00010C (v05 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: DSDT 000000007b7e2000 0040E0 (v02 HP DSDT 00000002 HPAG 00020000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: FACS 000000007b5d5000 000040
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: UEFI 000000007b5ef000 000042 (v01 HP ProLiant 00000000 00000000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: MCEJ 000000007b7fc000 000130 (v01 HP ProLiant 00000001 INTL 0100000D)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SSDT 000000007b7fb000 000064 (v02 HP SpsNvs 00000002 INTL 20130328)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: HEST 000000007b7fa000 0000A8 (v01 HP ProLiant 00000001 INTL 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: BERT 000000007b7f9000 000030 (v01 HP ProLiant 00000001 INTL 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: ERST 000000007b7f8000 000230 (v01 HP ProLiant 00000001 INTL 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: EINJ 000000007b7f7000 000150 (v01 HP ProLiant 00000001 INTL 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: BGRT 000000007b7f6000 000038 (v01 HP ProLiant 00000002 HP 01000013)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: HPET 000000007b7f4000 000038 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: PMCT 000000007b7f3000 000064 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: WDDT 000000007b7f2000 000040 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: APIC 000000007b7f1000 0001AE (v03 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: MCFG 000000007b7f0000 00003C (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SLIT 000000007b7ef000 00002D (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SRAT 000000007b7ee000 000178 (v03 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SPMI 000000007b7ed000 000041 (v05 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: RASF 000000007b7ec000 000030 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SPCR 000000007b7eb000 000050 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: MSCT 000000007b7ea000 00004E (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: BDAT 000000007b7e9000 000030 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: PCCT 000000007b7fd000 00006E (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: DMAR 000000007b7e7000 0001B2 (v01 HP ProLiant 00000001 HP 00000001)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SSDT 000000007b7db000 0061D1 (v02 HP PCISSDT 00000002 HPAG 00020000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SSDT 000000007b7da000 0001CB (v02 HP TIMESSDT 00000002 HPAG 00020000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: SSDT 000000007b7d9000 0002F2 (v01 HP pmab 00000001 INTL 20130328)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x47fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] NUMA: Initialized distance table, cnt=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x47fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] NODE_DATA [mem 0x47fff8000-0x47fffcfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] [ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88046f600000-ffff88047f5fffff] on node 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Zone ranges:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Normal [mem 0x100000000-0x47fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Movable zone start for each node
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Early memory node ranges
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x00001000-0x00092fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x00094000-0x0009ffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x00100000-0x6b9ecfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x6be6d000-0x6be6dfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x6beef000-0x784fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x7b7ff000-0x7b7fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] node 0: [mem 0x100000000-0x47fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] On node 0 totalpages: 4161437
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA zone: 23 pages reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA32 zone: 7616 pages used for memmap
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] DMA32 zone: 487423 pages, LIFO batch:31
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Normal zone: 57344 pages used for memmap
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x00] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x04] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x06] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x08] uid[0x08] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x0a] uid[0x0a] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x01] uid[0x01] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x03] uid[0x03] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x05] uid[0x05] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x07] uid[0x07] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x09] uid[0x09] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC (apic_id[0x0b] uid[0x0b] enabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x01] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x03] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x05] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x07] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x09] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: X2APIC_NMI (uid[0x0b] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] nr_irqs_gsi: 64
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00093000-0x00093fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x6b9ed000-0x6be6cfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x6be6e000-0x6beeefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x784ff000-0x788fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x788ff000-0x790fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x790ff000-0x791fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x791ff000-0x7b5fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7b5ff000-0x7b7fefff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x7b800000-0x7fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xffffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] e820: [mem 0x90000000-0xffffffff] available for PCI devices
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88047fc00000 s81536 r8192 d20864 u131072
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u131072 alloc=1*2097152
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4096390
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Policy zone: Normal
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-107-generic.efi.signed root=UUID=be7b00a7-1c3e-4f3b-a909-a88cadd146c8 ro quiet splash vt.handoff=7
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Checking aperture...
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] No AGP bridge found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Memory: 16142756K/16645748K available (7432K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 502992K reserved)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Hierarchical RCU implementation.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Offload RCU callbacks from all CPUs
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Offload RCU callbacks from CPUs: 0-11.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:1184 16
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] Console: colour dummy device 80x25
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] console [tty0] enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] allocated 67108864 bytes of page_cgroup
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] hpet clockevent registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.004000] tsc: Detected 2397.247 MHz processor
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4794.49 BogoMIPS (lpj=9588988)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.000009] pid_max: default: 32768 minimum: 301
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.002687] Security Framework initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.002717] AppArmor: AppArmor initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.002719] Yama: becoming mindful.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.004670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.010372] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.012802] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.012835] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013216] Initializing cgroup subsys memory
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013224] Initializing cgroup subsys devices
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013227] Initializing cgroup subsys freezer
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013229] Initializing cgroup subsys blkio
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013231] Initializing cgroup subsys perf_event
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013236] Initializing cgroup subsys hugetlb
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013269] CPU: Physical Processor ID: 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.013271] CPU: Processor Core ID: 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014417] mce: CPU supports 22 MCE banks
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014471] CPU0: Thermal monitoring enabled (TM1)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014475] process: using mwait in idle threads
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014480] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014480] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014480] tlb_flushall_shift: 6
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.014664] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.016429] ACPI: Core revision 20131115
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.020936] ACPI: All ACPI Tables successfully acquired
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.032348] ftrace: allocating 28674 entries in 113 pages
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053809] dmar: Host address width 46
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053813] dmar: DRHD base: 0x000000fbffc000 flags: 0x1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053823] dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053826] dmar: RMRR base: 0x00000079174000 end: 0x00000079176fff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053828] dmar: RMRR base: 0x000000791ed000 end: 0x000000791f0fff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053829] dmar: RMRR base: 0x000000791dd000 end: 0x000000791ecfff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053831] dmar: RMRR base: 0x000000791ca000 end: 0x000000791dafff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053833] dmar: RMRR base: 0x000000791db000 end: 0x000000791dcfff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053932] IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053934] IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.053936] HPET id 0 under DRHD base 0xfbffc000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.054096] Enabled IRQ remapping in x2apic mode
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.054098] Enabling x2apic
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.054100] Enabled x2apic
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.054106] Switched APIC routing to cluster x2apic.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.054660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094333] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (fam: 06, model: 3f, stepping: 02)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094343] TSC deadline timer enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094357] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094367] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094368] Intel PMU driver.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094372] ... version: 3
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094373] ... bit width: 48
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094375] ... generic registers: 4
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094376] ... value mask: 0000ffffffffffff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094378] ... max period: 0000ffffffffffff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094380] ... fixed-purpose events: 3
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.094381] ... event mask: 000000070000000f
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.097400] x86: Booting SMP configuration:
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.113749] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.097403] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.259440] x86: Booted up 1 node, 12 CPUs
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.259443] smpboot: Total of 12 processors activated (57533.92 BogoMIPS)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.286588] devtmpfs: initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.288818] EVM: security.selinux
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.288819] EVM: security.SMACK64
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.288820] EVM: security.ima
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.288821] EVM: security.capability
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.288862] PM: Registering ACPI NVS region [mem 0x791ff000-0x7b5fefff] (37748736 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.289971] pinctrl core: initialized pinctrl subsystem
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290021] regulator-dummy: no parameters
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290050] RTC time: 11:14:12, date: 01/12/17
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290079] NET: Registered protocol family 16
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290167] cpuidle: using governor ladder
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290169] cpuidle: using governor menu
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290202] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290203] ACPI: bus type PCI registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290205] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.290258] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.313851] PCI: Using configuration type 1 for base access
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.314804] bio: create slab <bio-0> at 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.314981] ACPI: Added _OSI(Module Device)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.314982] ACPI: Added _OSI(Processor Device)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.314983] ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.314984] ACPI: Added _OSI(Processor Aggregator Device)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324014] ACPI: Interpreter enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324029] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324033] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324038] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324046] ACPI: (supports S0 S5)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324048] ACPI: Using IOAPIC for interrupt routing
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324115] HEST: Table parsing has been initialized.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324120] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.324435] ACPI: No dock devices found.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338129] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338138] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338145] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338188] PCI host bridge to bus 0000:ff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338192] pci_bus 0000:ff: root bus resource [bus ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338209] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338287] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338358] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338420] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338478] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338534] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338590] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338647] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338705] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338765] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338821] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338879] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338936] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.338992] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339050] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339107] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339169] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339224] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339279] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339336] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339395] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339454] pci 0000:ff:12.2: [8086:2f70] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339521] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339585] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339650] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339716] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339780] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339843] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339906] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.339964] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340027] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340091] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340156] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340220] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340285] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340344] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340404] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340469] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340533] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340597] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340667] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340733] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340793] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340853] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340918] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.340978] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341038] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341098] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341168] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341226] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341284] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341343] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341401] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341463] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.341525] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.342178] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.342184] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.342340] acpi PNP0A08:00: _OSC: platform does not support [AER]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.342470] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.342473] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343475] PCI host bridge to bus 0000:00
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343479] pci_bus 0000:00: root bus resource [bus 00-fe]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343483] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343485] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343488] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343490] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343493] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343495] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343498] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343501] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343503] pci_bus 0000:00: root bus resource [mem 0x38000000000-0x39fffffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343515] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343702] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343763] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343870] pci 0000:00:01.0: System wakeup disabled by ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343914] pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.343973] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344117] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344175] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344280] pci 0000:00:02.0: System wakeup disabled by ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344320] pci 0000:00:02.1: [8086:2f05] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344378] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344515] pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344573] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344678] pci 0000:00:02.2: System wakeup disabled by ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344716] pci 0000:00:02.3: [8086:2f07] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344773] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344914] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.344972] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345078] pci 0000:00:03.0: System wakeup disabled by ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345115] pci 0000:00:03.1: [8086:2f09] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345173] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345313] pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345371] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345508] pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345565] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345704] pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345719] pci 0000:00:04.0: reg 0x10: [mem 0x39ff002c000-0x39ff002ffff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345899] pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.345913] pci 0000:00:04.1: reg 0x10: [mem 0x39ff0028000-0x39ff002bfff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346094] pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346107] pci 0000:00:04.2: reg 0x10: [mem 0x39ff0024000-0x39ff0027fff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346287] pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346300] pci 0000:00:04.3: reg 0x10: [mem 0x39ff0020000-0x39ff0023fff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346487] pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346500] pci 0000:00:04.4: reg 0x10: [mem 0x39ff001c000-0x39ff001ffff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346680] pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346693] pci 0000:00:04.5: reg 0x10: [mem 0x39ff0018000-0x39ff001bfff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346875] pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.346888] pci 0000:00:04.6: reg 0x10: [mem 0x39ff0014000-0x39ff0017fff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347071] pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347084] pci 0000:00:04.7: reg 0x10: [mem 0x39ff0010000-0x39ff0013fff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347264] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347430] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347625] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347795] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.347805] pci 0000:00:05.4: reg 0x10: [mem 0x92f04000-0x92f04fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348002] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348229] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348249] pci 0000:00:14.0: reg 0x10: [mem 0x39ff0000000-0x39ff000ffff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348306] pci 0000:00:14.0: PME# supported from D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348455] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348480] pci 0000:00:1a.0: reg 0x10: [mem 0x92f02000-0x92f023ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348588] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348730] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348814] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.348961] pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349044] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349187] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349271] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349381] pci 0000:00:1c.4: System wakeup disabled by ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349430] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349456] pci 0000:00:1d.0: reg 0x10: [mem 0x92f01000-0x92f013ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349707] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349957] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349979] pci 0000:00:1f.2: reg 0x10: [io 0x4058-0x405f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349989] pci 0000:00:1f.2: reg 0x14: [io 0x407c-0x407f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.349999] pci 0000:00:1f.2: reg 0x18: [io 0x4050-0x4057]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350009] pci 0000:00:1f.2: reg 0x1c: [io 0x4078-0x407b]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350018] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350028] pci 0000:00:1f.2: reg 0x24: [mem 0x92f00000-0x92f007ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350078] pci 0000:00:1f.2: PME# supported from D3hot
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350211] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350228] pci 0000:00:1f.3: reg 0x10: [mem 0x39ff0031000-0x39ff00310ff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350247] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350534] pci 0000:00:01.0: PCI bridge to [bus 0c]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350586] pci 0000:00:01.1: PCI bridge to [bus 0f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350739] pci 0000:03:00.0: [103c:3239] type 00 class 0x010400
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350754] pci 0000:03:00.0: reg 0x10: [mem 0x92d00000-0x92dfffff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350766] pci 0000:03:00.0: reg 0x18: [mem 0x92e00000-0x92e003ff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350774] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350789] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.350828] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358349] pci 0000:00:02.0: PCI bridge to [bus 03]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358354] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358358] pci 0000:00:02.0: bridge window [mem 0x92d00000-0x92efffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358412] pci 0000:00:02.1: PCI bridge to [bus 10]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358554] pci 0000:00:02.2: PCI bridge to [bus 06]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358607] pci 0000:00:02.3: PCI bridge to [bus 11]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358756] pci 0000:09:00.0: [1002:683f] type 00 class 0x030000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358769] pci 0000:09:00.0: reg 0x10: [mem 0x39fe0000000-0x39fefffffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358779] pci 0000:09:00.0: reg 0x18: [mem 0x92c00000-0x92c3ffff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358786] pci 0000:09:00.0: reg 0x20: [io 0x2000-0x20ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358796] pci 0000:09:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358837] pci 0000:09:00.0: supports D1 D2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358840] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358919] pci 0000:09:00.1: [1002:aab0] type 00 class 0x040300
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358931] pci 0000:09:00.1: reg 0x10: [mem 0x92c40000-0x92c43fff 64bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.358990] pci 0000:09:00.1: supports D1 D2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366350] pci 0000:00:03.0: PCI bridge to [bus 09]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366354] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366358] pci 0000:00:03.0: bridge window [mem 0x92c00000-0x92cfffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366364] pci 0000:00:03.0: bridge window [mem 0x39fe0000000-0x39fefffffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366412] pci 0000:00:03.1: PCI bridge to [bus 12]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366466] pci 0000:00:03.2: PCI bridge to [bus 13]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366517] pci 0000:00:03.3: PCI bridge to [bus 14]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366583] pci 0000:00:1c.0: PCI bridge to [bus 15]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366673] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366694] pci 0000:01:00.0: reg 0x10: [io 0x1200-0x12ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366710] pci 0000:01:00.0: reg 0x14: [mem 0x92a8d000-0x92a8d1ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366726] pci 0000:01:00.0: reg 0x18: [io 0x1100-0x11ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366918] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366939] pci 0000:01:00.1: reg 0x10: [mem 0x91000000-0x91ffffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366955] pci 0000:01:00.1: reg 0x14: [mem 0x92a88000-0x92a8bfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.366971] pci 0000:01:00.1: reg 0x18: [mem 0x92000000-0x927fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367157] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367178] pci 0000:01:00.2: reg 0x10: [io 0x1000-0x10ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367193] pci 0000:01:00.2: reg 0x14: [mem 0x92a8c000-0x92a8c0ff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367209] pci 0000:01:00.2: reg 0x18: [mem 0x92900000-0x929fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367224] pci 0000:01:00.2: reg 0x1c: [mem 0x92a00000-0x92a7ffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367240] pci 0000:01:00.2: reg 0x20: [mem 0x92a80000-0x92a87fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367255] pci 0000:01:00.2: reg 0x24: [mem 0x92800000-0x928fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367271] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367342] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367415] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.367488] pci 0000:01:00.4: reg 0x20: [io 0x1300-0x131f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374361] pci 0000:00:1c.2: PCI bridge to [bus 01]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374366] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374371] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374489] pci 0000:02:00.0: [14e4:1665] type 00 class 0x020000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374515] pci 0000:02:00.0: reg 0x10: [mem 0x92b30000-0x92b3ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374535] pci 0000:02:00.0: reg 0x18: [mem 0x92b40000-0x92b4ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374556] pci 0000:02:00.0: reg 0x20: [mem 0x92b50000-0x92b5ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374570] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374654] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374739] pci 0000:02:00.1: [14e4:1665] type 00 class 0x020000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374765] pci 0000:02:00.1: reg 0x10: [mem 0x92b00000-0x92b0ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374785] pci 0000:02:00.1: reg 0x18: [mem 0x92b10000-0x92b1ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374806] pci 0000:02:00.1: reg 0x20: [mem 0x92b20000-0x92b2ffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374820] pci 0000:02:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.374903] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382365] pci 0000:00:1c.4: PCI bridge to [bus 02]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382377] pci 0000:00:1c.4: bridge window [mem 0x92b00000-0x92bfffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382448] pci_bus 0000:00: on NUMA node 0 (pxm 0)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.382933] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383104] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383827] ACPI: Enabled 9 GPEs in block 00 to 3F
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383837] ACPI: \_SB_.UNC0: notify handler is installed
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383851] ACPI: \_SB_.PCI0: notify handler is installed
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.383943] Found 2 acpi root devices
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384104] vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=none,locks=none
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384110] vgaarb: setting as boot device: PCI:0000:01:00.1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384113] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384115] vgaarb: loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384117] vgaarb: bridge control possible 0000:01:00.1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384119] vgaarb: bridge control possible 0000:09:00.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384341] SCSI subsystem initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384422] libata version 3.00 loaded.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384455] ACPI: bus type USB registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384475] usbcore: registered new interface driver usbfs
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384486] usbcore: registered new interface driver hub
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384507] usbcore: registered new device driver usb
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.384694] PCI: Using ACPI for IRQ routing
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392170] PCI: pci_cache_line_size set to 64 bytes
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392359] e820: reserve RAM buffer [mem 0x00093000-0x0009ffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392362] e820: reserve RAM buffer [mem 0x6b9ed000-0x6bffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392364] e820: reserve RAM buffer [mem 0x6be6e000-0x6bffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392367] e820: reserve RAM buffer [mem 0x784ff000-0x7bffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392369] e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392481] NetLabel: Initializing
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392484] NetLabel: domain hash size = 128
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392485] NetLabel: protocols = UNLABELED CIPSOv4
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392506] NetLabel: unlabeled traffic allowed by default
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.392592] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.394662] Switched to clocksource hpet
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.401596] AppArmor: AppArmor Filesystem Enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.401618] pnp: PnP ACPI init
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.401631] ACPI: bus type PNP registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.401804] pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402051] pnp 00:01: [dma 4]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402083] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402130] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402168] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402202] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402276] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402387] system 00:06: [io 0x0500-0x053f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402391] system 00:06: [io 0x0400-0x047f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402394] system 00:06: [io 0x0540-0x057f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402397] system 00:06: [io 0x0600-0x061f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402400] system 00:06: [io 0x0880-0x0883] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402402] system 00:06: [io 0x0800-0x081f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402407] system 00:06: [mem 0xfed1c000-0xfed3ffff] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402410] system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402413] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402416] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402418] system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402421] system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402424] system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402428] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402461] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402520] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402694] pnp: PnP ACPI: found 9 devices
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.402696] ACPI: bus type PNP unregistered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409507] pci 0000:00:02.0: BAR 15: assigned [mem 0x93000000-0x930fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409513] pci 0000:00:1c.2: BAR 15: assigned [mem 0x93100000-0x931fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409518] pci 0000:00:1c.4: BAR 14: assigned [mem 0x93200000-0x932fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409521] pci 0000:00:01.0: PCI bridge to [bus 0c]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409531] pci 0000:00:01.1: PCI bridge to [bus 0f]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409542] pci 0000:03:00.0: BAR 6: assigned [mem 0x93000000-0x9307ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409545] pci 0000:00:02.0: PCI bridge to [bus 03]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409549] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409554] pci 0000:00:02.0: bridge window [mem 0x92d00000-0x92efffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409558] pci 0000:00:02.0: bridge window [mem 0x93000000-0x930fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409564] pci 0000:00:02.1: PCI bridge to [bus 10]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409573] pci 0000:00:02.2: PCI bridge to [bus 06]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409583] pci 0000:00:02.3: PCI bridge to [bus 11]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409594] pci 0000:09:00.0: BAR 6: assigned [mem 0x92c60000-0x92c7ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409596] pci 0000:00:03.0: PCI bridge to [bus 09]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409599] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409604] pci 0000:00:03.0: bridge window [mem 0x92c00000-0x92cfffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409609] pci 0000:00:03.0: bridge window [mem 0x39fe0000000-0x39fefffffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409615] pci 0000:00:03.1: PCI bridge to [bus 12]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409624] pci 0000:00:03.2: PCI bridge to [bus 13]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409633] pci 0000:00:03.3: PCI bridge to [bus 14]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409643] pci 0000:00:1c.0: PCI bridge to [bus 15]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409657] pci 0000:01:00.2: BAR 6: assigned [mem 0x93100000-0x9310ffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409659] pci 0000:00:1c.2: PCI bridge to [bus 01]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409663] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409669] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409674] pci 0000:00:1c.2: bridge window [mem 0x93100000-0x931fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409682] pci 0000:02:00.0: BAR 6: assigned [mem 0x92b80000-0x92bbffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409685] pci 0000:02:00.1: BAR 6: assigned [mem 0x92bc0000-0x92bfffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409688] pci 0000:00:1c.4: PCI bridge to [bus 02]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409694] pci 0000:00:1c.4: bridge window [mem 0x93200000-0x932fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409699] pci 0000:00:1c.4: bridge window [mem 0x92b00000-0x92bfffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409707] pci_bus 0000:00: resource 4 [mem 0x000c4000-0x000cbfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409710] pci_bus 0000:00: resource 5 [io 0x0000-0x03af]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409712] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409715] pci_bus 0000:00: resource 7 [io 0x03b0-0x03bb]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409717] pci_bus 0000:00: resource 8 [io 0x03c0-0x03df]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409720] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409722] pci_bus 0000:00: resource 10 [io 0x1000-0xffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409725] pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409728] pci_bus 0000:00: resource 12 [mem 0x38000000000-0x39fffffffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409731] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409733] pci_bus 0000:03: resource 1 [mem 0x92d00000-0x92efffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409736] pci_bus 0000:03: resource 2 [mem 0x93000000-0x930fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409739] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409741] pci_bus 0000:09: resource 1 [mem 0x92c00000-0x92cfffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409744] pci_bus 0000:09: resource 2 [mem 0x39fe0000000-0x39fefffffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409748] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409750] pci_bus 0000:01: resource 1 [mem 0x90000000-0x92afffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409753] pci_bus 0000:01: resource 2 [mem 0x93100000-0x931fffff pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409755] pci_bus 0000:02: resource 1 [mem 0x93200000-0x932fffff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409758] pci_bus 0000:02: resource 2 [mem 0x92b00000-0x92bfffff 64bit pref]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.409805] NET: Registered protocol family 2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410207] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410582] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410782] TCP: Hash tables configured (established 131072 bind 65536)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410811] TCP: reno registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410843] UDP hash table entries: 8192 (order: 6, 262144 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.410929] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.411074] NET: Registered protocol family 1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.411235] pci 0000:00:14.0: enabling device (0140 -> 0142)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.413060] pci 0000:01:00.1: Video device with shadowed ROM
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.413484] PCI: CLS 0 bytes, default 64
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.413569] Trying to unpack rootfs image as initramfs...
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.807894] Freeing initrd memory: 18828K (ffff880035b2a000 - ffff880036d8d000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.807938] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.807940] software IO TLB [mem 0x679ed000-0x6b9ed000] (64MB) mapped at [ffff8800679ed000-ffff88006b9ecfff]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808264] microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808274] microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808280] microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808289] microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808299] microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808310] microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808319] microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808327] microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808334] microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808342] microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808351] microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808359] microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x2b
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808408] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808410] Scanning for low memory corruption every 60 seconds
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808660] Initialise system trusted keyring
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808699] audit: initializing netlink socket (disabled)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.808708] type=2000 audit(1484219652.776:1): initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.833384] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.834490] zbud: loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.834628] VFS: Disk quotas dquot_6.5.2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.834662] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.834980] fuse init (API version 7.22)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835034] msgmni has been set to 31835
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835075] Key type big_key registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835504] Key type asymmetric registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835505] Asymmetric key parser 'x509' registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835580] io scheduler noop registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835581] io scheduler deadline registered (default)
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835598] io scheduler cfq registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.835928] pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.836118] pcieport 0000:00:01.1: irq 66 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.836301] pcieport 0000:00:02.0: irq 67 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.836481] pcieport 0000:00:02.1: irq 68 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.836658] pcieport 0000:00:02.2: irq 69 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.836837] pcieport 0000:00:02.3: irq 70 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837017] pcieport 0000:00:03.0: irq 71 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837196] pcieport 0000:00:03.1: irq 72 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837374] pcieport 0000:00:03.2: irq 73 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837551] pcieport 0000:00:03.3: irq 74 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837736] pcieport 0000:00:1c.0: irq 75 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837791] pcieport 0000:00:1c.2: irq 76 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.837985] pcieport 0000:00:1c.4: irq 77 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838047] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838050] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838062] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838065] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838075] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838077] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838079] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838088] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838091] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838100] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838103] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838112] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838114] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838125] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838126] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838127] pci 0000:09:00.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838130] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838140] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838142] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838151] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838154] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838166] pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838169] pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838180] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838184] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838194] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838196] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838197] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838198] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838199] pci 0000:01:00.4: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838202] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838213] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838214] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838218] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838232] ioapic: probe of 0000:00:05.4 failed with error -22
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838237] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838248] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838287] efifb: probing for efifb
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838639] efifb: framebuffer at 0x91000000, mapped to 0xffffc90011c00000, using 3072k, total 3072k
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838641] efifb: mode is 1024x768x32, linelength=4096, pages=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838642] efifb: scrolling: redraw
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.838643] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.871409] Console: switching to colour frame buffer device 128x48
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904363] fb0: EFI VGA frame buffer device
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904374] intel_idle: MWAIT substates: 0x2120
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904375] intel_idle: v0.4 model 0x3F
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904376] intel_idle: lapic_timer_reliable_states 0xffffffff
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904673] ipmi message handler version 39.2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.904769] ACPI: Power Button [PWRF]
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.905086] ERST: Error Record Serialization Table (ERST) support is initialized.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.905092] pstore: Registered erst as persistent store backend
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.905209] GHES: APEI firmware first mode is enabled by WHEA _OSC.
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.905308] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.925737] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.927230] Linux agpgart interface v0.103
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.928916] brd: module loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930054] loop: module loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930605] libphy: Fixed MDIO Bus: probed
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930715] tun: Universal TUN/TAP device driver, 1.6
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930717] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930799] PPP generic driver version 2.4.2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.930854] ehci-pci: EHCI PCI platform driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.931254] ehci-pci 0000:00:1a.0: EHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.931263] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.931278] ehci-pci 0000:00:1a.0: debug port 2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.935199] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.935228] ehci-pci 0000:00:1a.0: irq 18, io mem 0x92f02000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946464] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946521] usb usb1: Product: EHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946523] usb usb1: Manufacturer: Linux 3.13.0-107-generic ehci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946525] usb usb1: SerialNumber: 0000:00:1a.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946688] hub 1-0:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.946697] hub 1-0:1.0: 2 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.947088] ehci-pci 0000:00:1d.0: EHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.947095] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.947109] ehci-pci 0000:00:1d.0: debug port 2
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.951000] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.951007] ehci-pci 0000:00:1d.0: irq 18, io mem 0x92f01000
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962459] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962503] usb usb2: Product: EHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962505] usb usb2: Manufacturer: Linux 3.13.0-107-generic ehci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962507] usb usb2: SerialNumber: 0000:00:1d.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962644] hub 2-0:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962650] hub 2-0:1.0: 2 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962742] ehci-platform: EHCI generic platform driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962753] ohci-pci: OHCI PCI platform driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962771] ohci-platform: OHCI generic platform driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962778] uhci_hcd: USB Universal Host Controller Interface driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962878] uhci_hcd 0000:01:00.4: UHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962886] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962901] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962939] uhci_hcd 0000:01:00.4: irq 19, io base 0x00001300
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962989] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962991] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962993] usb usb3: Product: UHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962995] usb usb3: Manufacturer: Linux 3.13.0-107-generic uhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.962997] usb usb3: SerialNumber: 0000:01:00.4
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.963126] hub 3-0:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.963133] hub 3-0:1.0: 2 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.963523] xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.963529] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964622] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964670] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964672] usb usb4: Product: xHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964674] usb usb4: Manufacturer: Linux 3.13.0-107-generic xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964676] usb usb4: SerialNumber: 0000:00:14.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964816] hub 4-0:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.964835] hub 4-0:1.0: 15 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965704] xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965709] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965755] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965757] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965759] usb usb5: Product: xHCI Host Controller
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965761] usb usb5: Manufacturer: Linux 3.13.0-107-generic xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965763] usb usb5: SerialNumber: 0000:00:14.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965898] hub 5-0:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.965911] hub 5-0:1.0: 6 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 0.970571] i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.258380] usb 1-1: new high-speed USB device number 2 using ehci-pci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.390728] usb 1-1: New USB device found, idVendor=8087, idProduct=800a
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.390734] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.391006] hub 1-1:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.391100] hub 1-1:1.0: 6 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.485778] i8042: Can't read CTR while initializing i8042
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.485782] i8042: probe of i8042 failed with error -5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.485858] mousedev: PS/2 mouse device common for all mice
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.485933] rtc_cmos 00:02: RTC can wake from S4
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486056] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486081] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486124] device-mapper: uevent: version 1.0.3
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486178] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486185] ledtrig-cpu: registered to indicate activity on CPUs
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.486186] EFI Variables Facility v0.08 2004-May-17
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503204] usb 2-1: new high-speed USB device number 2 using ehci-pci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503286] TCP: cubic registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503339] NET: Registered protocol family 10
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503460] NET: Registered protocol family 17
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503468] Key type dns_resolver registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.503766] Loading compiled-in X.509 certificates
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.504513] Loaded X.509 cert 'Magrathea: Glacier signing key: e107b28df077392fd62dfdd792bf3b1dbd570cd8'
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.504521] registered taskstats version 1
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.507586] Key type trusted registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.512562] Key type encrypted registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.512566] AppArmor: AppArmor sha1 policy hashing enabled
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.512568] IMA: No TPM chip found, activating TPM-bypass!
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513267] regulator-dummy: disabling
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513355] Magic number: 1:204:226
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513359] port3: hash matches
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513360] port3: hash matches
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513362] port3: hash matches
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513387] acpi device:73: hash matches
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513418] memory memory108: hash matches
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513488] rtc_cmos 00:02: setting system clock to 2017-01-12 11:14:13 UTC (1484219653)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.513598] pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2400 MHz
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.516883] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.516885] EDD information not available.
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.516910] PM: Hibernation image not present or could not be loaded.
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.517642] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.517644] Write protecting the kernel read-only data: 12288k
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.518022] Freeing unused kernel memory: 748K (ffff880002745000 - ffff880002800000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.519359] Freeing unused kernel memory: 672K (ffff880002b58000 - ffff880002c00000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547464] HP HPSA Driver (v 3.4.0-1)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547474] hpsa 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547562] hpsa 0000:03:00.0: MSIX
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547596] hpsa 0000:03:00.0: irq 78 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547601] hpsa 0000:03:00.0: irq 79 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547605] hpsa 0000:03:00.0: irq 80 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547609] hpsa 0000:03:00.0: irq 81 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547613] hpsa 0000:03:00.0: irq 82 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547617] hpsa 0000:03:00.0: irq 83 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547620] hpsa 0000:03:00.0: irq 84 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.547624] hpsa 0000:03:00.0: irq 85 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.548339] pps_core: LinuxPPS API ver. 1 registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.548341] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.549475] PTP clock support registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.550127] ahci 0000:00:1f.2: version 3.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.550369] ahci 0000:00:1f.2: irq 86 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.550419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x30 impl SATA mode
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.550422] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.552039] tg3.c:v3.134 (Sep 16, 2013)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.558840] scsi0 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.558931] scsi1 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559006] scsi2 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559081] scsi3 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559163] scsi4 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559221] scsi5 : ahci
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559265] ata1: DUMMY
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559266] ata2: DUMMY
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559267] ata3: DUMMY
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559268] ata4: DUMMY
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559270] ata5: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00300 irq 86
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.559272] ata6: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00380 irq 86
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.567764] hpsa 0000:03:00.0: hpsa0: <0x3239> at IRQ 78 using DAC
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.585689] tg3 0000:02:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 28:80:23:1b:20:08
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.585693] tg3 0000:02:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.585695] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.585697] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.588352] scsi6 : hpsa
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.589813] hpsa 0000:03:00.0: RAID device c6b3t0l0 added.
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.589816] hpsa 0000:03:00.0: Direct-Access device c6b0t0l0 added.
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.589918] scsi 6:3:0:0: RAID HP H240 3.00 PQ: 0 ANSI: 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.589981] scsi 6:0:0:0: Direct-Access HP LOGICAL VOLUME 3.00 PQ: 0 ANSI: 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590095] scsi 6:3:0:0: Attached scsi generic sg0 type 12
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590289] sd 6:0:0:0: Attached scsi generic sg1 type 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590314] sd 6:0:0:0: [sda] 1953459632 512-byte logical blocks: (1.00 TB/931 GiB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590446] sd 6:0:0:0: [sda] Write Protect is off
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590449] sd 6:0:0:0: [sda] Mode Sense: 73 00 00 08
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590492] sd 6:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.590983] sda: sda1 sda2 < sda5 >
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.591286] sd 6:0:0:0: [sda] Attached SCSI disk
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.597633] tg3 0000:02:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 28:80:23:1b:20:09
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.597636] tg3 0000:02:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.597638] tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.597640] tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.638636] usb 2-1: New USB device found, idVendor=8087, idProduct=8002
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.638642] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.638923] hub 2-1:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.639008] hub 2-1:1.0: 8 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.806200] tsc: Refined TSC clocksource calibration: 2397.223 MHz
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.806240] usb 4-2: new high-speed USB device number 2 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.822371] usb 4-2: New USB device found, idVendor=0424, idProduct=2660
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.822376] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.822758] hub 4-2:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.822782] hub 4-2:1.0: 2 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878182] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878209] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878430] ata6.00: supports DRM functions and may not be fully accessible
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878564] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878567] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.878570] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.880182] ata6.00: supports DRM functions and may not be fully accessible
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.880271] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.880367] ata6.00: configured for UDMA/133
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.882950] ata5.00: ATAPI: hp CDDVDW SU-208GB, JM00, max UDMA/100
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.887463] ata5.00: configured for UDMA/100
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.891843] scsi 4:0:0:0: CD-ROM hp CDDVDW SU-208GB JM00 PQ: 0 ANSI: 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.901731] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.901735] cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.901893] sr 4:0:0:0: Attached scsi CD-ROM sr0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.901963] sr 4:0:0:0: Attached scsi generic sg2 type 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902135] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 EMT0 PQ: 0 ANSI: 5
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902243] sd 5:0:0:0: Attached scsi generic sg3 type 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902249] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902373] sd 5:0:0:0: [sdb] Write Protect is off
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902376] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.902415] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.903900] sdb: sdb1 sdb2 sdb3
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.904254] sd 5:0:0:0: [sdb] Attached SCSI disk
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.928842] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.928844] EXT4-fs (sdb2): write access will be enabled during recovery
Jan 12 12:14:15 balcar-ml150 kernel: [ 1.990097] usb 4-14: new high-speed USB device number 3 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.006325] usb 4-14: New USB device found, idVendor=1a40, idProduct=0101
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.006328] usb 4-14: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.006330] usb 4-14: Product: USB 2.0 Hub [MTT]
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.006696] hub 4-14:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.006720] hub 4-14:1.0: 4 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.108411] EXT4-fs (sdb2): orphan cleanup on readonly fs
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.115493] EXT4-fs (sdb2): 48 orphan inodes deleted
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.115495] EXT4-fs (sdb2): recovery complete
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.185697] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.214443] random: nonblocking pool is initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.289976] usb 4-14.4: new high-speed USB device number 4 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.308129] usb 4-14.4: New USB device found, idVendor=05e3, idProduct=0605
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.308132] usb 4-14.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.308134] usb 4-14.4: Product: USB2.0 Hub
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.308693] hub 4-14.4:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.308945] hub 4-14.4:1.0: 4 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.585843] usb 4-14.4.2: new high-speed USB device number 5 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.607693] usb 4-14.4.2: New USB device found, idVendor=0e8d, idProduct=1806
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.607695] usb 4-14.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.607697] usb 4-14.4.2: Product: MT1887
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.607698] usb 4-14.4.2: Manufacturer: MediaTek Inc
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.607698] usb 4-14.4.2: SerialNumber: S13V6YAG2001HV
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.681807] usb 4-14.4.3: new high-speed USB device number 6 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.698128] usb 4-14.4.3: New USB device found, idVendor=1a40, idProduct=0101
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.698134] usb 4-14.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.698137] usb 4-14.4.3: Product: USB 2.0 Hub
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.698596] hub 4-14.4.3:1.0: USB hub found
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.698629] hub 4-14.4.3:1.0: 4 ports detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.769816] usb 4-14.4.4: new full-speed USB device number 7 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.786931] usb 4-14.4.4: New USB device found, idVendor=0c45, idProduct=60c0
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.786933] usb 4-14.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.786935] usb 4-14.4.4: Product: USB camera
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.787011] usb 4-14.4.4: ep 0x83 - rounding interval to 512 microframes, ep desc says 800 microframes
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.805964] Switched to clocksource tsc
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.969704] usb 4-14.4.3.1: new high-speed USB device number 8 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.988312] usb 4-14.4.3.1: New USB device found, idVendor=058f, idProduct=6362
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.988315] usb 4-14.4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.988316] usb 4-14.4.3.1: Product: Mass Storage Device
Jan 12 12:14:15 balcar-ml150 kernel: [ 2.988317] usb 4-14.4.3.1: SerialNumber: 058F312D81B
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.073682] usb 4-14.4.3.2: new low-speed USB device number 9 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095625] usb 4-14.4.3.2: New USB device found, idVendor=046d, idProduct=c517
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095627] usb 4-14.4.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095629] usb 4-14.4.3.2: Product: USB Receiver
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095630] usb 4-14.4.3.2: Manufacturer: Logitech
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095712] usb 4-14.4.3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.095715] usb 4-14.4.3.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.181659] usb 4-14.4.3.4: new full-speed USB device number 10 using xhci_hcd
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.201339] usb 4-14.4.3.4: New USB device found, idVendor=0458, idProduct=0152
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.201341] usb 4-14.4.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.201343] usb 4-14.4.3.4: Product: 2.4G Wireless Mouse
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.201344] usb 4-14.4.3.4: Manufacturer: Genius
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.475519] Adding 16646140k swap on /dev/sdb3. Priority:-1 extents:1 across:16646140k SSFS
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.490381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.575022] lp: driver loaded but no devices found
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.579866] ppdev: user-space parallel port driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.594387] power_meter ACPI000D:00: Found ACPI power meter.
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.594411] power_meter ACPI000D:00: Ignoring unsafe software power cap!
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.612803] wmi: Mapper loaded
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613527] IPMI System Interface driver.
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613572] ipmi_si: probing via ACPI
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613595] ipmi_si 00:07: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613596] ipmi_si: Adding ACPI-specified kcs state machine
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613611] ipmi_si: probing via SMBIOS
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613613] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613614] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613616] ipmi_si: probing via SPMI
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613618] ipmi_si: SPMI: io 0xca3 regsize 1 spacing 1 irq 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613619] ipmi_si: Adding SPMI-specified kcs state machine
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613621] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.613896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.615858] dca service started, version 1.12.1
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.620305] ioatdma: Intel(R) QuickData Technology Driver 4.00
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.620665] ioatdma 0000:00:04.0: irq 87 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.621126] ioatdma 0000:00:04.1: irq 88 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.621472] ioatdma 0000:00:04.2: irq 89 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.622397] ioatdma 0000:00:04.3: irq 90 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.622836] ioatdma 0000:00:04.4: irq 91 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.624817] ioatdma 0000:00:04.5: irq 92 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.627465] ioatdma 0000:00:04.6: irq 93 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.628083] ioatdma 0000:00:04.7: irq 94 for MSI/MSI-X
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.636627] [drm] Initialized drm 1.1.0 20060810
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.643646] usb-storage 4-14.4.2:1.0: USB Mass Storage device detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.644068] hidraw: raw HID events driver (C) Jiri Kosina
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.644397] scsi7 : usb-storage 4-14.4.2:1.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.644488] usb-storage 4-14.4.3.1:1.0: USB Mass Storage device detected
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.644908] scsi8 : usb-storage 4-14.4.3.1:1.0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.644988] usbcore: registered new interface driver usb-storage
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.648514] Linux video capture interface: v2.00
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.656231] gspca_main: v2.14.0 registered
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.659604] gspca_main: sonixj-2.14.0 probing 0c45:60c0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667322] Bluetooth: Core ver 2.17
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667333] NET: Registered protocol family 31
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667333] Bluetooth: HCI device and connection manager initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667342] Bluetooth: HCI socket layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667343] Bluetooth: L2CAP socket layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.667345] Bluetooth: SCO socket layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.673059] Bluetooth: RFCOMM TTY layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.673070] Bluetooth: RFCOMM socket layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.673074] Bluetooth: RFCOMM ver 1.11
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.676284] usbcore: registered new interface driver usbhid
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.676287] usbhid: USB HID core driver
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.678190] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.678193] Bluetooth: BNEP filters: protocol multicast
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.678201] Bluetooth: BNEP socket layer initialized
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.699957] type=1400 audit(1484219655.680:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=623 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.699963] type=1400 audit(1484219655.680:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=623 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.700293] type=1400 audit(1484219655.680:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=623 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.717517] [drm] radeon kernel modesetting enabled.
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.719715] checking generic (91000000 300000) vs hw (39fe0000000 10000000)
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.720000] radeon 0000:09:00.0: enabling device (0140 -> 0143)
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.723051] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xA001).
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.723763] [drm] register mmio base: 0x92C00000
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.723763] [drm] register mmio size: 262144
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.777476] input: sonixj as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.4/input/input1
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.778624] usbcore: registered new interface driver sonixj
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.794983] usbcore: registered new interface driver snd-usb-audio
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799228] type=1400 audit(1484219655.780:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799236] type=1400 audit(1484219655.780:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799241] type=1400 audit(1484219655.780:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799733] type=1400 audit(1484219655.780:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799740] type=1400 audit(1484219655.780:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.799999] type=1400 audit(1484219655.780:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.803087] input: Genius 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.3/4-14.4.3.4/4-14.4.3.4:1.0/input/input2
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.803104] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.3/4-14.4.3.2/4-14.4.3.2:1.0/input/input3
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.803332] hid-generic 0003:0458:0152.0003: input,hidraw0: USB HID v1.11 Mouse [Genius 2.4G Wireless Mouse] on usb-0000:00:14.0-14.4.3.4/input0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.805199] logitech 0003:046D:C517.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14.4.3.2/input0
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.805211] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.805526] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb4/4-14/4-14.4/4-14.4.3/4-14.4.3.2/4-14.4.3.2:1.1/input/input4
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.806003] logitech 0003:046D:C517.0002: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14.4.3.2/input1
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.848800] ipmi_si 00:07: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
Jan 12 12:14:15 balcar-ml150 kernel: [ 3.848806] ipmi_si 00:07: IPMI kcs interface initialized
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.039188] tg3 0000:02:00.0: irq 95 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.039194] tg3 0000:02:00.0: irq 96 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.039198] tg3 0000:02:00.0: irq 97 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.039202] tg3 0000:02:00.0: irq 98 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.039206] tg3 0000:02:00.0: irq 99 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.165226] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.167820] tg3 0000:02:00.1: irq 100 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.167828] tg3 0000:02:00.1: irq 101 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.167834] tg3 0000:02:00.1: irq 102 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.167840] tg3 0000:02:00.1: irq 103 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.167845] tg3 0000:02:00.1: irq 104 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.291728] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.641795] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.642248] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.642677] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.643087] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.643321] sd 8:0:0:0: Attached scsi generic sg4 type 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.643485] sd 8:0:0:1: Attached scsi generic sg5 type 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.643665] sd 8:0:0:2: Attached scsi generic sg6 type 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.643814] sd 8:0:0:3: Attached scsi generic sg7 type 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.644334] scsi 7:0:0:0: CD-ROM ASUS SDRW-08D3S-U F611 PQ: 0 ANSI: 0
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.649412] sd 8:0:0:0: [sdc] Attached SCSI removable disk
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.649865] sd 8:0:0:1: [sdd] Attached SCSI removable disk
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.650412] sd 8:0:0:2: [sde] Attached SCSI removable disk
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.650905] sd 8:0:0:3: [sdf] Attached SCSI removable disk
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.659642] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.659835] sr 7:0:0:0: Attached scsi CD-ROM sr1
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.659945] sr 7:0:0:0: Attached scsi generic sg8 type 5
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.685471] ATOM BIOS: R7
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.685491] [drm] GPU not posted. posting now...
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714314] radeon 0000:09:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714316] radeon 0000:09:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714318] [drm] Detected VRAM RAM=2048M, BAR=256M
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714319] [drm] RAM width 128bits DDR
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714367] [TTM] Zone kernel: Available graphics memory: 8151190 kiB
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714368] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714368] [TTM] Initializing pool allocator
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714371] [TTM] Initializing DMA pool allocator
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714383] [drm] radeon: 2048M of VRAM memory ready
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714384] [drm] radeon: 1024M of GTT memory ready.
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.714391] [drm] Loading VERDE Microcode
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.715959] [drm] radeon/VERDE_mc2.bin: 31500 bytes
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.717226] [drm] GART: num cpu pages 262144, num gpu pages 262144
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.718009] [drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.718011] [drm] PCIE gen 3 link speeds already enabled
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720653] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720751] radeon 0000:09:00.0: WB enabled
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720753] radeon 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880441e54c00
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720754] radeon 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880441e54c04
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720755] radeon 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880441e54c08
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720756] radeon 0000:09:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880441e54c0c
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.720757] radeon 0000:09:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880441e54c10
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721242] radeon 0000:09:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900127b5a18
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721243] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721244] [drm] Driver supports precise vblank timestamp query.
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721245] radeon 0000:09:00.0: radeon: MSI limited to 32-bit
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721261] radeon 0000:09:00.0: irq 105 for MSI/MSI-X
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721269] radeon 0000:09:00.0: radeon: using MSI.
Jan 12 12:14:16 balcar-ml150 kernel: [ 4.721306] [drm] radeon: irq initialized.
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.169275] [drm] ring test on 0 succeeded in 2 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.169280] [drm] ring test on 1 succeeded in 1 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.169284] [drm] ring test on 2 succeeded in 1 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.169296] [drm] ring test on 3 succeeded in 9 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.169303] [drm] ring test on 4 succeeded in 3 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.354860] [drm] ring test on 5 succeeded in 2 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.354865] [drm] UVD initialized successfully.
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356446] [drm] Enabling audio 0 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356447] [drm] Enabling audio 1 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356448] [drm] Enabling audio 2 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356449] [drm] Enabling audio 3 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356450] [drm] Enabling audio 4 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356450] [drm] Enabling audio 5 support
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356495] [drm] ib test on ring 0 succeeded in 0 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356522] [drm] ib test on ring 1 succeeded in 0 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356548] [drm] ib test on ring 2 succeeded in 0 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356585] [drm] ib test on ring 3 succeeded in 0 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.356621] [drm] ib test on ring 4 succeeded in 0 usecs
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507135] [drm] ib test on ring 5 succeeded
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507374] [drm] Radeon Display Connectors
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507375] [drm] Connector 0:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507376] [drm] HDMI-A-1
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507377] [drm] HPD1
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507378] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507379] [drm] Encoders:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507380] [drm] DFP1: INTERNAL_UNIPHY
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507381] [drm] Connector 1:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507381] [drm] DVI-D-1
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507382] [drm] HPD2
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507383] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507384] [drm] Encoders:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507384] [drm] DFP2: INTERNAL_UNIPHY
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507385] [drm] Connector 2:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507386] [drm] VGA-1
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507387] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507387] [drm] Encoders:
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.507388] [drm] CRT1: INTERNAL_KLDSCP_DAC1
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.512995] [drm] Possible lm96163 thermal controller at 0x4c with fan control
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.513059] [drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.751139] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.751145] tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.751146] tg3 0000:02:00.0 eth0: EEE is disabled
Jan 12 12:14:17 balcar-ml150 kernel: [ 5.751172] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.687701] [drm] radeon: dpm initialized
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.756375] audit_printk_skb: 117 callbacks suppressed
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.756378] type=1400 audit(1484219658.740:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.757163] type=1400 audit(1484219658.740:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767006] [drm] fb mappable at 0x39FE1488000
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767007] [drm] vram apper at 0x39FE0000000
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767008] [drm] size 8294400
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767009] [drm] fb depth is 24
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767010] [drm] pitch is 7680
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767012] checking generic (91000000 300000) vs hw (39fe0000000 10000000)
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767125] radeon 0000:09:00.0: fb1: radeondrmfb frame buffer device
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767127] radeon 0000:09:00.0: registered panic notifier
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767139] [drm] Initialized radeon 2.36.0 20080528 for 0000:09:00.0 on minor 0
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767190] snd_hda_intel 0000:09:00.1: enabling device (0140 -> 0142)
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767282] hda-intel 0000:09:00.1: Handle VGA-switcheroo audio client
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767284] hda-intel 0000:09:00.1: Using LPIB position fix
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767285] hda-intel 0000:09:00.1: Force to non-snoop mode
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.767329] snd_hda_intel 0000:09:00.1: irq 106 for MSI/MSI-X
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.769868] hda-intel 0000:09:00.1: Enable sync_write for stable communication
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.777390] HDMI ATI/AMD: no speaker allocation for ELD
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.778378] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:09:00.1/sound/card0/input5
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.816281] type=1400 audit(1484219658.800:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.816286] type=1400 audit(1484219658.800:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.896307] type=1400 audit(1484219658.880:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.897414] type=1400 audit(1484219658.880:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.897417] type=1400 audit(1484219658.880:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.928276] type=1400 audit(1484219658.912:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.928698] type=1400 audit(1484219658.912:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=873 comm="apparmor_parser"
Jan 12 12:14:18 balcar-ml150 kernel: [ 6.944230] type=1400 audit(1484219658.928:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=873 comm="apparmor_parser"
Jan 12 12:14:19 balcar-ml150 kernel: [ 7.265529] vgaarb: device changed decodes: PCI:0000:09:00.0,olddecodes=io+mem,decodes=none:owns=none
Jan 12 12:14:19 balcar-ml150 kernel: [ 7.478803] pci 0000:01:00.1: Invalid ROM contents
Jan 12 12:14:43 balcar-ml150 kernel: [ 33.800979] audit_printk_skb: 9 callbacks suppressed
Jan 12 12:14:43 balcar-ml150 kernel: [ 33.800981] type=1400 audit(1484219683.869:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2860 comm="apparmor_parser"
Jan 12 12:14:43 balcar-ml150 kernel: [ 33.800986] type=1400 audit(1484219683.869:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2860 comm="apparmor_parser"
Jan 12 12:14:43 balcar-ml150 kernel: [ 33.801230] type=1400 audit(1484219683.869:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2860 comm="apparmor_parser"
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.471513] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 103
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503258] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 98
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503260] Raw EDID:
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503263] 00 ff ff ff ff ff ff 00 26 cd 33 56 01 01 01 01
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503265] 00 1a 01 03 80 30 1b 78 2a 4b 05 a6 5a 52 a1 27
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503267] 0d 50 54 bf ef 80 d1 c0 b3 00 a9 40 a9 c0 95 00
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503269] 95 0f 81 80 71 4f 02 3a 80 18 71 38 2d 40 58 2c
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503271] 45 0d ff ff 51 00 00 1e 00 00 00 ff 00 30 0a 20
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503273] 20 20 20 20 20 20 20 20 20 20 00 00 00 fd 00 37
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503275] 4c 0f 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.503277] 00 50 4c 32 32 38 38 48 0a 20 20 20 20 20 01 a2
Jan 12 12:41:36 balcar-ml150 kernel: [ 1645.559511] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 166
Jan 12 12:46:29 balcar-ml150 kernel: [ 1938.313026] i2c /dev entries driver
Jan 12 12:48:03 balcar-ml150 kernel: [ 2032.709485] ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20131115/exfield-299)
Jan 12 12:48:03 balcar-ml150 kernel: [ 2032.709494] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff880469551488), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
Jan 12 12:48:03 balcar-ml150 kernel: [ 2032.709508] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20131115/power_meter-339)
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076825] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 128
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076831] Raw EDID:
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076834] 00 ff ff ff ff ff ff 00 26 cd 33 56 01 01 01 01
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076836] 00 1a 01 03 80 30 1b 78 2a 4b 05 a6 5a 52 a1 27
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076838] 0d 50 54 bf ef 80 d1 c0 b3 00 a9 40 a9 c0 95 00
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076840] 95 0f 81 80 71 4f 02 3a 80 18 71 38 2d 40 58 2c
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076841] 45 7f ff ff fd 00 00 1e 00 00 00 ff 00 30 0a 20
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076843] 20 20 20 20 20 20 20 20 20 20 00 00 00 fd 00 37
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076845] 4c 0f 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.076847] 00 50 4c 32 32 38 38 48 0a 20 20 20 20 20 01 a2
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105480] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 206
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105482] Raw EDID:
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105484] 00 ff ff ff ff ff ff 00 26 cd 33 56 01 01 01 01
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105486] 00 1a 01 03 80 30 1b 78 2a 4b ff ff ff ff f1 27
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105488] 0d 50 54 bf ef 80 d1 c0 b3 00 a9 40 a9 c0 95 00
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105490] 95 0f 81 80 71 4f 02 3a 80 18 71 38 2d 40 58 2c
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105492] 45 00 dd 0c 11 00 00 1e 00 00 00 ff 00 30 0a 20
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105494] 20 20 20 20 20 20 20 20 20 20 00 00 00 fd 00 37
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105496] 4c 0f 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.105497] 00 50 4c 32 32 ff ff ff ff ff e0 20 20 20 01 a2
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133879] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 114
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133880] Raw EDID:
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133882] 00 ff ff ff ff ff ff 00 26 cd 33 56 01 01 01 01
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133884] 00 1a 01 03 80 30 1b 78 2a 4b 05 a6 5a 52 a1 27
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133886] 0d 50 54 bf ef 80 d1 c0 b3 00 a9 40 a9 c0 95 00
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133888] 95 0f 81 80 71 4f 02 3a 80 18 71 38 2d 40 58 2c
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133890] 45 00 dd 0c 11 00 00 1e 00 00 00 ff 00 32 ff ff
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133892] ff ff fe 20 20 20 20 20 20 20 00 00 00 fd 00 37
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133893] 4c 0f 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
Jan 12 13:01:05 balcar-ml150 kernel: [ 2814.133895] 00 50 4c 32 32 38 38 48 0a 20 20 20 20 20 01 a2