How to set up a Canon Pixma TR4520 printer?

Connect your Canon Pixma Tr4520 printer

The printer will make your life easier, but it may take time to figure it out. If you purchased a Canon Pixma Tr4520 setup, you need to configure them before printing.

See the following instructions to set up your Canon Pixma Tr4520 printer. So you don't have to browse too many links to find a solution to your problem. go to the official website ij.start.canon

• Canon TR4520 print setup 
• Pixma TR4520 Copy Setup 
• Canon Pixma TR4520 Scan Center
• Canon Pixma TR4520 Fax Setup
• Solution - Canon Pixma TR4520 Printer Not Working
• Solution - Canon Pixma TR4520 Wireless Setup Problems

Canon Pixma TR4520 print setup

1. Turn on the printer.
2. Open a sheet of A4 paper and place it in a container.
3. Check that the sheets have been correctly cut before assembly.
4. Download and install the appropriate drivers for your computer.
5. Select the most important print location. 
6. After reviewing the settings, click Apply to save changes.
7. Select font size and additional features based on the values.
8. Select a good print, then drop it on a copier.
9. If you select a print job based on an existing job, the settings will be saved.

Canon Pixma TR4520 Copy Setup

1. Turn on the printer and follow the instructions to begin the simple setup process.
2. Complete the required pages in the container.
3. Place the old data on the scanner workbench.
4. Click Print and you can choose the color you want.
5. You can select the desired printers and printers. 
6. After viewing the file, click 'OK'.
7. Click the Stop button to stop the process.
8. When the process is complete, delete the old data.

Canon Pixma TR4520 Scan Center

1. Turn on the printer and the computer.
2. Make the necessary printer settings.
3. Bring the cap to clean the scanner area.
4. Place the old file on the scanner bed to begin the scanning process.
5. Close the scanner cover after placing the file. 
6. Click "Scan" to scan the page in the desired color.
7. You can store your scanned files in a specific location on your system and access them from there.

Canon Pixma TR4520 USB Interface

1. The driver can be downloaded from the manufacturer's website.
2. Run the installer file to install on your operating system.
3. Follow the on-screen instructions to complete the driver setup.
4. During installation, you will be asked how to log in.

5. Select USB as the configuration connection.
6. Connect the Canon PixmaTR4520 to the operating system using a USB cable.
7. Wait for the connection to be established and make the necessary adjustments.
8. Open the file you want to print and make sure the connection is established.

Canon Pixma TR4520 Wireless Connection setup

1. Canon Pixma TR4520 can also be used with a wireless connection.
2. Before you begin, make sure the printer is turned on.
3. After power is on, it goes through running.
4. Go to LAN settings and enable wireless directly on the screen to     enable it.
5. Complete the setup process. 
6. Follow the on-screen instructions to install the driver.
7. Select "Wireless" as the connection type and adjust the setting during operation.

Solution - Canon Pixma TR4520 Printer Not Working

1. Make sure the printer is turned on and connected to power.
2. Connect the printer to the Canon Pixma TR4520.
3. If you use wires to connect, check that the connection is incorrect.
4. When the process is complete, restart your computer and printer.
5. Note whether the problem can be solved.

Solution - Canon Pixma TR4520 Wireless Setup Problems

1. Make sure the printer is turned on.
2. Make sure the driver is properly connected to the port.
3. Click "Wireless Connection" in the LAN options.
4. Make sure the WIFI button on the panel is on.
5. Assign a print function to the Canon Pixma TR4520.